Compaq presario cq61: PROBLEM STARTING WITH PRESARIO CQ61... CAPS AND NUM LOCK FLASHES every 4 seconds!

Similar Questions

• Problem starting with the Tecra A8 and A9 models

  We have about 20 or more, A8 and A9 Tecra notebooks and each has shown signs of the same problem again. If rebotting and netwrok cable is attached, so they will not start. Remove the cable and it is a normal startup.
  The A8 has a motherboard replacement (problem existed before the replacement) and is still there now after the replacement. The MB is replaced mainly because the sound card was dead. All machines are running XP Pro OS. The A9 is a novelty. Would be - this driver issue or - this one of my favorite - an update from MS that has caused problems.

  > If reboot and the cable network is connected, then they will not start. Remove the cable and it is a normal startup.

  Hmm that's strange.
  However, I recommend that you check the BIOS settings, please ensure that LAN is not set as first boot device.
  Also check if the BIOS has been updated to the State

  Sorry, but this is really rare and you should try universal workaround solutions that could help resolve this problem.

• Problem started with the update KB979906 and error 0x66a code.

  Completed all the missions entrusted by Lily Wang.

  Error code: 0x66A
  Need to reinstall the Framework

  Use as a guide

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  So have you tried to reinstall .NET framework as recommended precedent?

  In this order-

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  TaurArian [MVP] 2005-2011 - Update Services

• Problem starting Portege 7200 - stops running and the light flashes

  I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

  its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

  ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

  Thanks for your help.

  Hello

  Have you tried to run the notebook without the docking station?
  If this isn't the case, then try it.
  Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

  But generally, if the LED flashes then this means that there is a hardware malfunction.
  The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
  Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

  Good luck

• MacBook pro 2 logon screen starts with no arrow cursor and must be restarted

  2014 Macbook Pro screen Retina 2 13 "opening session starts with no arrow cursor and must be restarted once every five tests.  When the computer reboots, message appears asking you if it must open programs that had started to load or cancel.  It is a recent problem that does not occur two months ago.  Once restarted, everything seems to be OK.  That is what it is?

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• New session started with an advertising page and all my tabs are lost

  New session started with an advertising page and all my tabs are lost. Restore the previous session is not active. How can I restore my tabs?

  Great work!

  Sessionstore.bak files are ancient, probably autour time that you have installed Firefox 33 when the sessionstore-backup folder has been added.

  To try using one or more files in the sessionstore-backup folder, here is the process:

  (1) exit Firefox and it must create a sessionstore.js from the main level of the profile folder file.

  (2) rename sessionstore.js to sessionstore.old file, or if you think that you will ever need, delete it.

  (3) copy in recovery.js or previous.js and rename sessionstore.js.

  (4) start Firefox then try to restore previous Session. Those are the tabs you want? If this isn't the case, you can try one of the other files in your backup sessionstore-backup.

  If none of the files has the missing tabs, you could try a recent Windows restore point. It's more complicated on Windows 8 on Windows 7, and you could benefit from using a third-party utility. These have been mentioned in another thread:

  • http://nicbedford.co.UK/software/systemrestoreexplorer/
  • http://www.ShadowExplorer.com/

  Or... I read on a roundabout way to get previous Versions on the Properties dialog box in Windows 8. I can't test it myself, but here's what you do:

  In the address bar of your Windows Explorer dialog box, replace the current path with the following and press ENTER:

  \\localhost\c$

  Then click at the end and nail on the following (with your user name) and press ENTER:

  \Users\username\AppData\Roaming\Mozilla\Firefox\Profiles

  That should help you in the vicinity of your profile folder. Then you can right-click sessionstore.js > properties > Previous Versions, or try one of the files in sessionstore-backups.

• How I replace the toolbar firefox... and remove the toolbar that starts with the MOST VISITED and SUGGESTED SITES

  Somehow lost the toolbar that has the page back arrow and refresh and stop icons. How can I replace those and remove a toolbar that starts with the MOST VISITED and lists several SUGGESTED SITES.

  Hello kittyheckel, please see the Navigation buttons such as back, home, bookmarks and recharge are missing. You'll want to disable the bookmarks toolbar and enable the navigation toolbar.

• Problems using with a 40TL968B TV and the Blu ray BDX4350 FPT-AG02G 3D glasses

  Hello

  I just set up a new player to Tv and BDX4350 40TL968B.

  I decided to invest in two or three pairs of glasses of the FPT-AG02G.

  When you try to view a 3D disc I'm having a problem where the shutter affect on continue glass cutting.

  What is happening on the two pairs of glasses and they both had a full charge using the USB cable supplied.

  When I turn on the light flashes every few seconds and if I get close to the TV, the 3-d effect begins on the glasses. This will continue for perhaps 5 to 10 seconds, where the function of components and the image appears is 3D, before stopping and I find myself watching the blurry image of TV again.

  If I move then if the lenses are very close to the IR output of the TV then the affect of filling may start but stop after period again.

  The TV IR Transmitter is not blocked by anything whatsoever, and niether is the receiver the most on the glasses.

  Everyone knows that before or have any ideas how to overcome the problem?

  Thank you, Ian.

  > When I turn on the light flashes every few seconds and if I get close to the TV, the 3-d effect begins on the glasses. This will continue for perhaps 5 to 10 seconds, where the function of components and the image appears is 3D, before stopping and I find myself watching the blurry image of TV again.

  I think you should check if the battery of 3D glasses is OK.

  I found a nice page of FAQ from Toshiba that can be useful in the future. :
  https://ask.Toshiba.co.UK/help/en-UK/3D-TV/?page=1

• When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

  Nancy O.

• HP Probook 6555 b: Caps lock and num is flashing 5 times, no start

  Hello

  My referenced above laptop - HP Probook 6555 b - which worked fine until yesterday stopped all of a sudden start.

  When turned on, all lights are on except for the Caps lock and Num that flashes 5 times.

  The fan starts to spin for a few seconds, then stops, there are two short attempts to boot the DVD player.

  I saw a lot of 'solutions' by Googling, none of them worked.

  If you have experienced these problems or if you have the expertise, I would appreciate your hand.

  Thank you

  Ginger

  Hello

  Follow the steps listed in the link below

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=4174258&docid=emr_na-c03515402&docLocale=en_US#N101A7

  http://h20565.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c01732674&sp4ts.Oid=4174258

• Compaq Presario 6604AU-BIOS and other startup problems

  My laptop Compaq Presario 6604 to THE beginning to give a lot of problems in recent times. Every day, I spend a lot time on their fixation; no resolution anyway.

  Problem 1: BIOS hangs at startup

  Problem 2: If the MESSAGE is finished, Windows crashes at startup (Vista blocking at the mobile bar)

  Problem 3: for the last three days, CD/DVD-ROM does not.

  System configuration: CPU AMD Athlon X 2, 2 GB DDR 2 RAM (2 x 1 GB module). nForce Chipset MoBo, GoMobile GeForce 7150 Graphics Card 160 GB HDD. Windows Vista Home Basic (32 bit)

  Problem 1:

  BIOS hangs at the initial screen for 3-5 minutes. After 3-5 minutes, it goes to the next screen. Pressing only works key "ESC". I tried the BIOS flashed with the latest firmware (PRICE Phoenix F 32). Problem persists.

  What I tried:

  1 memory module checked. Tried different RAM module.

  2 checked hard drive for errors - Self Test passed.

  3 flashed the BIOS with the latest Firmware.

  Problem 2:

  Vista hangs at the initial screen (screen bar trip)

  What I tried:

  1. Startup Repair

  2. removed PCMCIA, 1394 driver files.

  3. system restore

  4 re-installled Vista.

  It's really frustrating to see the screen hanging even after reinstalling Vista. The Startup Repair tool produces the following result:

  Signature of the problem:
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  Signature problem 03:2
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: NoRootCause
  Signature of the problem 07:0
  Signature problem 08:2
  Signature of the problem 09: WrpRepair
  Issue 10:2 signature
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Problem 3:

  If CD/DVD disc problem is related to the two above, we can discuss it further. Otherwise, I'll look it up in other sections of the forum.

  Any help would be appreciated. Thanks in advance

  Solved!

  The problem was with supply management power to the motherboard. I took it to a service person and he said it's a common problem with Compaq V6000 laptop /V3000 of the series... He solved the problem in 30 mins by replacing the chips... Too bad I spent several weeks on troubleshooting the problem myself.

  I hope that this post will help someone...

  Thank you!

• Desktop Compaq Presario has beep and won't start

  My Compaq Presario desktop PC makes a sound beep and won't start. The SN # is CNX65112RS. Someone help me please!

  That's great. Please mark the thread as solved.

• Compaq Presario C731TU: RAM and CPU max UPGRADE Presario C731tu chipset GLS960 cpusocket PPGA478 RAM and CPU max UPGRADE

  Hi all!

  I have a Compaq Presario C731TU I absolutely need to upgrade its opportunities top of page. I discovered that he could run processor family Intel core 2 duo, and celeron family, that sounds really good!

  Then consulted taken PPGA478 processors on the site of intel with their processor feature filter (http://ark.intel.com/search/advanced?s=t&FamilyText=Legacy%20Intel%C2%AE%20Core%E2%84%A22%20Processo...)   the best option seems to be Intel® Core™ 2 Duo Processor T9500 (2.60 GHz, 800 MHz FSB, 6 MB Cache).

  My question is:

  Is there another cpu option better? Inside of a forum, I read that it can withstand up to Intel C2D T9xxx family but after T9500 (e.g. T9600 or T9900) taking turns into PGA478 and not PPGA478. What is the difference between PPGA478 and PGA478? are they the same or not?

  Are there limits on the CPU with the BIOS upgrade? (mine is upgrated to F34 which should be the latest version)

  About RAM: this laptop should work max 2 GB of ram but in fact I use it with 3 GB of ram (with these config.: 1 GB on the inner slot and 2 GB on the external, the inverse solution does not work, can not guess why), but someone "found a way" to use the 2 banks of 2 GB 4 GB total (and if according with this http://www.intel.com/Assets/PDF/specupdate/316274.pdf - pag. 19 - should be quite possible) , what ram 2x2gb modules can be accepted if? Help me = S

  Thank you very much in advance!

  I opened the laptop and the chipset inside the computer, wirtten there is an INTEL GL 960 who should manage only 553 mhz FSB... But... I installed inside, as the core 2 duo t9300, which has 800 Mhz FSB and it is fully functional in frequency from 800 Mhz to FSB. Really good news =)

  AIDA 64 tool (former Everest) shows the FSB of GL960 chipset can run on 533, 667 and 800 Mhz frequency.

• Compaq mini c110: problem starting Compaq mini c110

  Hello

  I have compaq mini c110 and when I start it up it gets to the windows loading screen and then it restarts every time. So I decided to reinstall windows. I tried with windows 7, I get the first screen where I choose language after that when I press on install it just "freezes". I waited 2 hours to get to the partitions so I can format them and install windows but nothing happened. Then I tried to install windows XP, I got to the part where he asks me what partition I want to install windows and when I select it it starts formatting and after 20 or 40% in fact, it gave me error that my hard drive is damaged and could not be partitioned.

  I want to know if I should buy a new hard drive in this case, I would like to buy ssd or is something wrong with my mbr, I would get another message if it's defective mbr and how could I solve this problem? Or maybe it's completely another thing?

  Thank you

  Hello @Kops1304,

  Welcome to the Forums of HP Support!

  I read your post on the hard drive and wanted to help you!

  Try to check the hard drive from the BIOS.  You can use the following documents to help you:

  HP Notebook PC - test a hard drive from BIOS

  HP laptops - Hard Drive failure errors: failure Imminent, Smart, BIOHD, HD535, etc.

  If the hard drive has failed indeed, then it must be replaced.  You can use this guide to help you replace the hard drive: PC Compaq Mini CQ10 Notebook and Compaq Mini 102 Notebook PC - Maintenance and Service of Guide (Chapter 4, Page 44-45).

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Have a great day!

• I have a Compaq Presario V5000 Laptop and have lost the files in c: drive recovery...

  I bought this computer laptop opportunity (Compaq Presario V5000), complete with the XP Home installed, which also had the original

  Preload / recovery facilties installed on the c: drive. and the image of preload on the partition fat32 D:

  I discovered that there are several users also installed, so I made a recovery sys, who has a real fine, but users were still there... So, I decided to format the c: drive, reinstall XP! Too late! I realized that the recovery system would be too lost... Now I have the D: (recocery Image), but no way to activate the preload process, which would format and reinstall the original version of XP complete with intact all of the initial recovery of files...

  This left me with this delema, as I DO not want to restore my laptop to original factory preload State...

  seaviewboy (Robert)

  Hello

  You may need to contact the manufacturer of the computer for help on this issue. You can also order a recovery disc.

  http://h30434.www3.HP.com/PSG/
  http://welcome.HP.com/country/us/en/contact_us.html