Compaq Presario CQ62-a20EC does not load

Similar Questions

• Compaq Presario CQ62-412NR does not start. Caps lock flashes.

  The LED caps lock flashes repidadly with long breaks between each blink, the wireless light and constant and the adapter LED is steady. I read blink codes and determined, he was the processor, but the problem persists after him substituting a known good. I finished the resets power to clear the bios before and after the change of the CPU. I also tried to replace the RAM. Anyone here have a clue whats going on?

  This looks like a problem with the motherboard if you already replaced the CPU and RAM.
  
  It would be probably cheaper to replace the unit at this time only so, fix it or replace the motherboard.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• Presario CQ56 - 154CA does not load BIOS

  Hello, I have a compaq presario CQ56 - 154 mobile CA. I deleted the hard drive using DriveCleanser to True Image Home 2011 and then tried to load the recovery with F11 (or F10 or whatever it is) Manager, but now all I get is a red screen with the big Q logo with "Press ESC for boot menu" on the bottom left and it just hangs there. I wipe the Win7 and system partitions, but not the recovery partition. I did a backup of these 3 partitions on my external hard drive, but the laptop does not start from a flash drive bootable, that I did in True Image, nor any of my startup CD and I set the bios to boot from flash first, then the DVD, then drive before wiping.

  I don't have the DVD with Recovery Manager recovery in Win7, but I wouldn't need them not from the recovery partition is still there.

  I read that some Compaq portable computers use a utility on the hard drive to load the bios, boot etc menu, so if this is the case with mine, then it has been completely removed. If this is the case, is there a way I can get it on the drive?

  If this isn't the case, I could try to remove the drive and put it in an envelope outside and connect to my office. It is possible that I can use the flash drive to use True Image to restore wiped two partitions. Also, I read that in this case, remove the disc and then turn on the laptop may allow the bios load, but I'd really prefer not to take the drive if I have to.

  I have faith in your ability to help me with this, thanks!

  ...
  Get off drugs or get back at them

  I seem to have solved the problem! As soon as I was able to restore the partition of 'System', which is the partition active, the bios loaded no problem. After the release of the bios, the Recovery Manager has finally started automatically and I was able to restore the laptop to its "out-of-box" State

  What I did buy a 2 1/2 inch, SATA HARD drive, USB adapter I used to connect the player to the laptop on my desk. I used my flash boot disk image first restore the MBR on the drive by using the backup that I did. That did not work. Then I restored the system partition, crossed my fingers and pulled to the top of the laptop again and finally the Recovery Manager came. It was the most beautiful thing I've seen in days.

  A little advice. If you want to clear Win7 out of your Compaq, say you want to sell or something, and you want to use a method of multiple passes, clean partition "Win7". Don't wipe the 'HP tools', the 'system', or the 'Recovery' partitions (is there such partitions). If none of this has meaning for you, find a friend or a tech store, he does not sense of. I consider myself lucky.

  Thanks Charles for your answers, I appreciate them!

• RE: Compaq Presario 732US, NIC does not work after upgrade to Windows XP SP3

  Yes, it's an old.  Compaq Presario 732US - care.  <>

  OK reformatted to give to my sister.  Had to manually installed Windows XP SP2 because the verson reformat is so update the old windows would not work with her.  After graduating on windows, update was very well and made a 140 update article.  Installed everything fine.  restarted and did windows update again and it came with SP3, which has installed fine.  EXCEPT after restarting, my network card went caput.  Said my ethernet is unplugged little matter what I do.

  So I unplug and put in another computer without touching anything and it works fine.  So the problem is with the Compaq Presario 732US.  I guess that I need drivers compatible with Windows XP SP3.

  Any idea where I can get them for such an old laptop?  Which ones to get? If I should take off just SP3 and not to date him? And if the pilots there was even the answer?

  Thank you in advance to any of you out there who can help meh.  :-)

  Try to use Device Manager, right-click the network card and choose uninstall. Restart the laptop to see if XP can install a working driver.

• Compaq Presario V3118AU Internet does not work after update BIOS and Broadcom Wireless Driver!

  I posted here yesterday on my computer because I have updated the Bios program with the update of the BIOS of 2007 and after that my internet no longer works.   The advice I've gotten is update Broadcom driver wireless as well as I did yesterday but the same result.    I was told also that if all things go wrong can I downgarde my Bios program that imposible because the older version on my computer model page is actually installed now on my computer.  I have run out of idea already of what else could be done please help.    Sometimes wireless connection to connect to the router but often difficult and if I am connected I can't go to the internet and to connect to the Local network I just get limited connectivity.

  Can someone please tell me what to do to solve this problem.

  Thank you very much!

  You are welcome. Let us know how it goes.

• Compaq Presario CQ62 USB drivers not installed?

  I get these annoying popup messages indicating that he has a problem to install the USB drivers. When I go into the Device Manager there is no exclamation mark next to all of the drivers in question. Here are as follows... 2936, 2937, 2938, 2939 293 a, 293C, 2934 and 2935. When I right click on them and get the drivers it gives me a warning that the new driver has been found to date but the problem install the new driver and I need to contact the manufacturer for a solution. Everything seems to work fine, but these popup messages appear on each startup, and it is rather boring. Any help would be greatly appreciated. Also my computer has been updated to the latest version without any other question.

  Hello:

  See this post.

  http://h30434.www3.HP.com/T5/hardware-upgrades-and/Intel-ICH9-family-USB-universal-host-controller-updates-for-HP/TD-p/741641

  Paul

• my computer compaq presario cq56 laptop does not recognize my usb drive hp usb flash drive v195b

  I have a lot of problems with flash drives and card readers that plug about my ports detected usb, I just buy a new drive 16 GB flash (HP) as above is said on this plug and play, but when I plug it I can't, there is no prompt and if I remove usb it doesn't show there either I have about six card readers and they worked when I used them first, but now I think that there is only one that works. Can you help me please?

  What a fool I am, because the new style of USB is a solid piece, it allows you to put it in the wrong way round, which is what I did, but your help led me to the solution. Thank you very much

  Ian.

• Wireless problem Compaq Presario CQ62 220 sv here is the solution! for 220 sv!

  Hi, I need help! Fast please I have a compaq presario CQ62 and do not work wireless

  I installed the driver for the wireless, but do not work

  is a BIOS problem? or anithing alse

  Please I need help! Fast!

  Thanks, Alex

  Sorry for my bad English!

  FAST!

  Update > I enter the device maneger and network controller is not installed

  Hardware ID >

  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
  PCI\VEN_10EC & DEV_8171 & CC_028000
  PCI\VEN_10EC & DEV_8171 & CC_0280

  Hello

  First of all, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46940.exe

  When this has completed, restart the laptop.

  When windows has completely recharged, download and install the Realtek WLAN driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46673.exe

  Kind regards

  DP - K

• my bluetooth does not work on my compaq presario CQ62

  my Bluetooth is not on my compaq presario CQ62

  Hello

  1. what exactly happens when you try to connect the Bluetooth device on the computer?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: If the problem persists try update the driver:

  a. click the Start button.
  (b) in the search box type Devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Add a Bluetooth device to your computer:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Compaq Presario CQ62-209WM turns is not on

  I have a Compaq Presario CQ62-209WM.

  I recently had a problem with this computer where the screen would go completely black during start-up or process during recovery from sleep mode.

  I updated the Bios and the problem disappeared, but now there's another problem.

  Because the Bios has been updated, the computer turns on if the power cable is plugged. But if I turn it on and then unplug the cable, it works very well. It does not lose power and the battery holds its charge normally.

  No idea what could be causing this?

  Try this it should help

  http://support.HP.com/us-en/document/c01684768

• Compaq presario cq62-219wm cpu update

  We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

  davidljtn44

  You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

• How can I install Windows XP on windows 7 laptop Compaq Presario CQ62-215DX?

  I want to install XP on my laptop (laptop Compaq Presario CQ62-215DX) which has Windows 7... give me some advice please

  You replace the startup disk in the BIOS cd. Then boot from the XP CD. And press a button when it tells you. However, he will wipe away Windows 7. So, if you want anything copy everything you want (with the exception of programs), before formatting the hard disk.

  NOTE: XP has no drivers for most of whats on the system (LAN/Sound/player card etc.). So if that is the only computer you have, go to HP site for this laptop search, download drivers and copy them into something. Before you begin. Or you won't get back on the internet...

  Also NOTE: If the disk hard in it is SATA, you will need to disable the AHCI in the BIOS (change it to IDE mode). Or XP will crash before you get to the configuration screen. Unless you download the SATA drivers, unzip / extract and add them when it says press F6 (on a floppy disk).

  The XP CD does not have SATA drivers on it either. If you do not add the SATA drivers during installation, do not change this back to AHCI after installing XP. Or it will crash

  In addition, make sure that you have a XP key. A key to windows 7 will not work

• disk failure hard compaq presario cq62-231nr

  My compaq presario cq62-231nr (product # XC434UA #aba) stopped working last week and I took it into the store of the computer it is diagnosed. They said that the hard drive has failed and they were unable to get all the files out of it. They wanted about $200 to fix so I just brought home. I bought a hard drive to it (500 GB hitachi) and when I install it myself. I have 4 dvd recovery disks that I made for her when I bought it there are 1 1/2 years. Never done this before so I am a little worried about smooth how it will go. My questions are:

  1-will the recovery discs works

  2 - 500 GB hard drive will I put actually no difference from the old hard drive was a 320 GB

  3 - What steps should I take after I put my hard drive in and start it (insofar as the use of the recovery discs)?

  4 - I need a key at any time in this process? I don't have one that I know of.

  Any help is appreciated!

  Hey, Dan:

  You are the very welcome.

  You have almost...

  When you turn on your PC for the first time after installing the new hard drive, you must press the F9 key to the HP welcome screen.

  This will give you a few startup options.  Your DVD player should appear as one of these options.

  Don't do anything about the selection who again. First, open the DVD drawer and insert the diskette 1 of your set of recovery disks. Close the door and wait a moment – just a few seconds.

  Then select the DVD - ROM drive in the list of the bootable devices in the list of startup options.

  Follow the instructions on the screen.

  You never know how long will last the electrical components.  This is why it is always advisable to keep the backup files.

  There's an old saying... "It is not a question of if a hard drive will fail, but a matter of time."

  Paul

• Where to buy the new screen? Compaq presario cq62-206SO

  Model Compaq presario cq62-206SO

  The best would be 100 USD or less shipping and display. I live in Norway.

  Note * I looked on eBay but I find not all screens for my model

  Try laptopscreen.com.  They ship all over the world, and the screens are usually less than $60.