Compaq Presario CQ62: HP WARRANTY CHECKER STOP WORKING error

Similar Questions

• my bluetooth does not work on my compaq presario CQ62

  my Bluetooth is not on my compaq presario CQ62

  Hello

  1. what exactly happens when you try to connect the Bluetooth device on the computer?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: If the problem persists try update the driver:

  a. click the Start button.
  (b) in the search box type Devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Add a Bluetooth device to your computer:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• disk failure hard compaq presario cq62-231nr

  My compaq presario cq62-231nr (product # XC434UA #aba) stopped working last week and I took it into the store of the computer it is diagnosed. They said that the hard drive has failed and they were unable to get all the files out of it. They wanted about $200 to fix so I just brought home. I bought a hard drive to it (500 GB hitachi) and when I install it myself. I have 4 dvd recovery disks that I made for her when I bought it there are 1 1/2 years. Never done this before so I am a little worried about smooth how it will go. My questions are:

  1-will the recovery discs works

  2 - 500 GB hard drive will I put actually no difference from the old hard drive was a 320 GB

  3 - What steps should I take after I put my hard drive in and start it (insofar as the use of the recovery discs)?

  4 - I need a key at any time in this process? I don't have one that I know of.

  Any help is appreciated!

  Hey, Dan:

  You are the very welcome.

  You have almost...

  When you turn on your PC for the first time after installing the new hard drive, you must press the F9 key to the HP welcome screen.

  This will give you a few startup options.  Your DVD player should appear as one of these options.

  Don't do anything about the selection who again. First, open the DVD drawer and insert the diskette 1 of your set of recovery disks. Close the door and wait a moment – just a few seconds.

  Then select the DVD - ROM drive in the list of the bootable devices in the list of startup options.

  Follow the instructions on the screen.

  You never know how long will last the electrical components.  This is why it is always advisable to keep the backup files.

  There's an old saying... "It is not a question of if a hard drive will fail, but a matter of time."

  Paul

• Wireless problem Compaq Presario CQ62 220 sv here is the solution! for 220 sv!

  Hi, I need help! Fast please I have a compaq presario CQ62 and do not work wireless

  I installed the driver for the wireless, but do not work

  is a BIOS problem? or anithing alse

  Please I need help! Fast!

  Thanks, Alex

  Sorry for my bad English!

  FAST!

  Update > I enter the device maneger and network controller is not installed

  Hardware ID >

  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
  PCI\VEN_10EC & DEV_8171 & CC_028000
  PCI\VEN_10EC & DEV_8171 & CC_0280

  Hello

  First of all, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46940.exe

  When this has completed, restart the laptop.

  When windows has completely recharged, download and install the Realtek WLAN driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46673.exe

  Kind regards

  DP - K

• How can I install Windows XP on windows 7 laptop Compaq Presario CQ62-215DX?

  I want to install XP on my laptop (laptop Compaq Presario CQ62-215DX) which has Windows 7... give me some advice please

  You replace the startup disk in the BIOS cd. Then boot from the XP CD. And press a button when it tells you. However, he will wipe away Windows 7. So, if you want anything copy everything you want (with the exception of programs), before formatting the hard disk.

  NOTE: XP has no drivers for most of whats on the system (LAN/Sound/player card etc.). So if that is the only computer you have, go to HP site for this laptop search, download drivers and copy them into something. Before you begin. Or you won't get back on the internet...

  Also NOTE: If the disk hard in it is SATA, you will need to disable the AHCI in the BIOS (change it to IDE mode). Or XP will crash before you get to the configuration screen. Unless you download the SATA drivers, unzip / extract and add them when it says press F6 (on a floppy disk).

  The XP CD does not have SATA drivers on it either. If you do not add the SATA drivers during installation, do not change this back to AHCI after installing XP. Or it will crash

  In addition, make sure that you have a XP key. A key to windows 7 will not work

• Compaq Presario CQ62-209WM turns is not on

  I have a Compaq Presario CQ62-209WM.

  I recently had a problem with this computer where the screen would go completely black during start-up or process during recovery from sleep mode.

  I updated the Bios and the problem disappeared, but now there's another problem.

  Because the Bios has been updated, the computer turns on if the power cable is plugged. But if I turn it on and then unplug the cable, it works very well. It does not lose power and the battery holds its charge normally.

  No idea what could be causing this?

  Try this it should help

  http://support.HP.com/us-en/document/c01684768

• Power on laptop Compaq Presario CQ62 of password

  I have a Compaq presario CQ62 laptop requireing a power on password after 3 attempts gives key number: 64560868 someone help out me? Birdy

  Hello

  Try to enter: 71448268

  Kind regards

  DP - K

• Compaq presario cq62-219wm cpu update

  We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

  davidljtn44

  You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

• I deleted the sound on my compaq presario cq62 I need to reinstall

  I deleted the sound on my compaq presario cq62 I need to reinstall

  Hello

  Go to the following site.

  Compaq - Support for desktop computers and laptops Presario. :
  http://h18000.www1.HP.com/CPQ-country/cpq_support.html?JumpID=hpr_R1002_USEN

  In the Find box, enter the number of the model of the computer, and tap Next.

  This will take you to the page with all the support options for this computer.

  Concerning

• Compaq Presario CQ62 fan running full speed but not overheating

  Hello everyone, Ihad a fear a while ago and I was freaked out. I only am not much with the material so I came to you all.

  I had absolutely nothing on except a browser and youtube. There is no intensive program or anything running in the background when all of a sudden the fan running at full power. It was extremely noisy and scary since it's my first to deal with this. I had the computer for 4 years and I have never rough with her, but a week ago I had someone try to clean, but they have managed to take off the keyboard and that's all.

  I panicked and turned it off only to turn it back on, the problem is that I don't remember the error message I thought it was 90 b and he says that the fan was not working properly

  However this site says the fan was not working or he fell from the tree, which may be the case for them, but for me it worked as hard as possible.

  What should I do?

  I was going to borrow a Tablet, so I can use internet to disassemble and clean.

  However, from time to time I spray outside with the aircan and I have the laptop on stilts, so it is triggered on an angle. I put it down for the first time today to do this.

  ANY suggestions?

  TL; Dr

  Fan worked at maximum capacity

  I think I have an error which I think has identified as 90 b and he said that the fan is not working properly

  I use a Presario CQ62

  Before hand, he worked at the same max thought that the laptop was > warm just a little hot.  AND none of the intensive programs ran

  If they are all the same part I linked will work for you. It's the radiator and fan. You can buy just the fan and replace in your radiator but if all this is so cheap, why go to the extra trouble?

• can a Compaq Presario CQ62-209WM laptop PC play star trek online or eveonline?

  can a Compaq Presario CQ62-209WM laptop PC play star trek online or eveonline?

  To my knowledge, CQ62-209WM laptop must support the Eve Online and Star Trek Online games like the laptop meets both minimum and recommended requirements for these games.

  Here is the link that has the least & Recommended system configuration necessary to play Eve Online:
  http://support.eveonline.com/pages/KB/article.aspx?ID=124

  Here is the link that has the least & the recommended system configuration to play Star Trek Online:
  http://www.startrekonline.com/FAQ#19

  Here is the link that has the specs of the laptop CQ62-209WM:
  http://support.HP.com/us-en/document/c02159506

• Compaq Presario CQ62-23 reset admin password.

  After 3 attempts to reset an unknown/forgotten administrator. password on my sons Compaq Presario CQ62-23, my disabling the system key is: 83963414. What to do next? We have no user guides/manuals/cds, or any other information. on this laptop which is 4 years old & a Windows 7 Home Premium =)

  Hello

  Try to enter: 32641430

  Kind regards

  DP - K

• Where to buy the new screen? Compaq presario cq62-206SO

  Model Compaq presario cq62-206SO

  The best would be 100 USD or less shipping and display. I live in Norway.

  Note * I looked on eBay but I find not all screens for my model

  Try laptopscreen.com.  They ship all over the world, and the screens are usually less than $60.

• _ "Windows Explorer has stopped working" error - HELP Please! __

  I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has stopped working"error appears literally every 5 to 15 seconds!  I click on cancel, and the other appears which says "Windows Explorer restarts" help please, I've never been more ready to give up on windows for good!

  Thank you, Bryan

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• applephotostreams.exe has stopped working error message

  I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:

  IN MICROSOFT WINDOWS BOX:

  applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available

  This is a link to the solution I found that worked for me...

  applephotostreams stops working