Compaq presario cq71, sudden death, does not start

Similar Questions

• Compaq Presario V6310US Notebook PC does not start at the top.

  This laptop was bought new on 11 May 2007.  This problem started about a month ago.  The monitor would be just off then go back to normal, until one day it just wouldn't start.  Lights along the top of the computer will be light, stay on for a while and then turns off and the monitor remains blank.  This happens again and again until I just turn it off.  My husband took the computer to a repairman who said it is a hardware problem, but he had no idea what.

  I don't know if I have included all relevant information, and if not, I'll be happy to add anything that might be useful.

  Thelma

  Thank you very much for your help. My cell phone is listed and I will contact HP tomorrow to grab their free repair. I do not think that this solves my problem but I don't know how to mark resolved. Maybe I can find how do. This is my first time on this forum but I don't know that it will not be my last.

• I have the Free AdAware from Lavasoft and suddenly it does not start and I can't remove it or re-insatll it; all solutions?

  All of a sudden my free AdAware spyware program does not start. I can't delete AdAware from the control panel or reinstall from the Web of Lavasoft site... There are some missing component installer. WHAT HAS HAPPENED, HOW CAN I REMOVE IT?

  Hi BobRullo,

  If you have installed the AdAware software recently, try to do a system restore that will repair return the computer to the point while it was working fine. Then, try to install the software.

  How to restore Windows XP to a previous state

  You can also ask your question in the Lavasoft forum for assistance.

  
  Reference: http://www.lavasoft.com/mylavasoft/support/faqs

  Hope the helps of information.

  Please post back and we do know.

• Presario SR1903WM with XP does not start in Windows

  Hello

  I'm working on a Presario SR1903WM with WIndows XP installed on it. Apparently he stopped as if by magic a day of work. When you try to start it up, the Compaq splash screen appears, then the choice for which operating system to load appears. (Originally, it there was only one choice for XP Home, now there are a few others that I was trying to correct the bootcfg). Eitherway, whatever the choice is made, the screen goes black and rest that way.

  The HARD drive is seen in BIOS. The partitions on the HARD drive are: D:\Windows. C:\I386; and C:\MiniNT. I tried the following steps:

  1. regular boot. Result-black screen.

  2 safe Mode. Freezes loading the DLL.

  3 console recovery disc Ran XP Pro, using the following commands: fixmbr/device/harddisk0. FIXMBR/device/harddisk1; Fixboot and bootcfg /rebuild; and chkdsk /r (as / f is not available in the Recovery Console).

  Nothing works. Any suggestions?

  All drivers are displayed for XP original HERE drivers

  You can buy a set of recovery disks for $27 from the link posted above or repeated HERE

• MacBook Pro does not start

  I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  You said "It's like death does not start."

  Does this mean that he shows no signs of life? Indicator light power?

  Hear the carillon?

  Hear the fans?

• DW CS4 does not start

  I am using DW CS4 and have been for many months with no problems - Version 10.0/Build 4117. All of a sudden it does not start, when I click on its icon I see the big green DW block and then a notice from Microsoft stating that Dreamweaver CS4 has stopped working - a problem... and the only choice I have is to close the program. I restarted my computer and tried again, without success. The program resides in my Program Files/Adobe folder on my C: drive.

  Bad, I need the program for the work I do. I've added no new software to my computer lately--at least none that I know.

  
  Any suggestions?

  Joe

  A similar problem existed with Dreamweaver CS3, but was supposed to have been fixed in CS4. It of a long shot, but worth a try...

  Rename the folder that contains the site that you worked last and see if Dreamweaver starts correctly. If this is the case, look in the site, you have disabled to see if any file is 8 KB (8192 bytes) or an exact multiple of it. If so, it supprimer delete site, rename the folder to its original name and restart Dreamweaver. If DW starts successfully, the bug 8 192 is back.

  However, as I say, it should be fixed in CS4. The other thing to try is rename your personal configuration file. On Vista, it is located in C:\Users\\AppData\Roaming\Adobe\Dreamweaver CS4\en_US\Configuration. This is a hidden folder, so you must enable hidden in Windows Explorer folders. Rename the Configuration_old folder and launch Dreamweaver. It should create a new Configuration file with the default settings.

• Compaq Presario CQ71 Ser: CNF01002QT model CQ71-4142F - Dead - no power supply - does not start - no led

  Hello *. *

  First time here...

  Compaq Presario Notebook Win7 32-bit - 4 GB DDR2, aged about 3 years?

  A customer brought this with virus / malware issues - arranged.

  On start-up, the bios made regular account that the HP OEM battery must renew. Not difficult technical question here.

  Powered on the laptop without the battery and the pc has stopped completely after a few seconds.  No beeps, no LED. Suspecting power, the original showed 19.* * volts. Ok.

  Bidirectional p - s for another check the jack plug connection. No change, tried jumping jack plug connection.

  Out two-way RAM for good, no change.
  Two-way 2032 battery of the bios for good, not change.
  Removed HARD drive, no change.

  Non-powered from DC or battery, depressed and button who was held for at least a minute, without change.

  The bios battery removed for 30 minutes, without change.

  Fan do not get stuck.

  No attached devices.

  Remarkable:

  Without battery : white DC power LED stays on for about 5 seconds. And then off.

  Old battery included: white DC power LED does not illuminate.

  I did not remove the optical drive, because I think it's ok. Works fine (or used to).

  I am familiar with this series of Presario laptops / laptops and while I have tried everything I know, I was wondering if, before I have conviction as having a short-circuit motherboard / failure, is there anything else I can try with this model of HP laptop before I am progressing with the send for repair of component.

  Thanks in advance

  Nick

  Freelance technician PC technical support

  Compaq Presario CQ71 CNF01002QT / WR067EA #ABF model CQ71-4142F - Dead - no power - no Boot - no led

  With everything else has been tried, it does seem to be a hardware problem at the moment. It is more than likely isolated pay-per-view system, based on the symptoms. I'm sorry.

• Compaq Presario CQ60-425SL: recharge the battery but the laptop does not start

  Hi, I tried to clean my laptop fan, because on the CPU temperatures up to 90 degrees Celsius. But after the opening of the laptop, clean the fan and put all the pieces together again once, it does not start. The led near the power cord plug is on, and the other indicating that the battery is also on. But when I press the power button / nothing happens. All cables and screws are in the right place. Model of the laptop Presario CQ60-425SL. Thank you!

  @georgedragan,

  Hello and thanks for the display on the HP support forums.  Here is the link to your maintenance and service guide.  What you can do, is use to open the new system and each point using the guide to make sure that everything goes back together in the right place.

  Compaq Presario CQ60 Notebook PC HP G60 Notebook PC Maintenance and Service Guide

  If you still experience problems at this time where the only option would be to contact HP support for service options.

  Use the following link to contact the correct service.

  Connect with the HP Support

  Please let me know how things are going.  Thanks again for posting and have a great day.

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Computer does not start after the screen goes blank &amp; Compaq.

  Hello

  A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.

  History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.

  I tried the following:

  Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.

  Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)

  Remove the battery of the BIOS for half a day

  Move jumpers CMOS from1, 2 to 2, 3 positions

  I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.

  Specifications of the computer

  Compaq Presario SR1629UK desktop PC

  Details can be found in the following link

  http://support.HP.com/us-en/document/c00579251

  Your help would me much appreciated...

  Hi guys,.

  Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.

  When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.

• Compaq does not start without charger

  First of all:

  Product name: Compaq Presario CQ57 301SA

  Operating system: Windows 7 Home Premium (64-bit)

  My problem is that whenever I try to boot my laptop with only the battery as energy source, it does not start. The equipment starts and everything, but displays only a black screen. No flashing in the keyboard and the power led is displayed.

  If I plug in charger and connect it to the laptop, which is the only time that the contineus to laptop to display the startup process.

  At first I thought that there may be a problem in the battery, but it is completely charged (100%), said the HP battery check is OK, and whenever I remove the charger after startup and the logon Windows stage, the laptop does not turn off.

  Just for the background story: I recently sent my HP laptop for hardware failure and they replaced my motherboard. When I picked up, they turned on without the charger plugged and it starts up successfully. When I turned it on in my own home, this happens.

  Any thoughts?

  Thank you.

  Hello Kazu081,

  Did you get this resolved? I thought that since you had the motherboard replaced, and that's when your troubles started, you must call and speak with a representative.  Let them know what is happening and please let me know the results.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Good luck!

• Compaq 6200 PRO MT: Makes the computer does not start after upgrade CPU

  I have the HP Compaq 6200 PRO PC of MT 615114-001 motherboard and processor Intel Celeron CPU (LGA 1155). After I changed the CPU for Intel Core i5 (LGA 1155) computer does not start. He begins a minute (less than one second) and stops again. No beeps. After you have installed the Celeron back everything works fine. i5 CPU is brand new. What can be?

  In my previous post, I explained the reason it has not worked, and listed the CPU that will work.

  HP tests CPU in the laboratory and publishes a list of processors that will work in a notebook.

  Notebook motherboard BIOS has a list of processors that will work. If it is installed, which is not encoded as OK in the BIOS ROM file, then this will not work.

  Processors published (in the maintenance guide & Service for your nttebook series model) are available in models that can be deilvered in State CTO (configured to order).

• HP compaq 6510 b does not start after the BIOS update

  Hello

  When I turn on my laptop HP compaq 6510 b it DISPLAYS this message: your bios has not finished updating 6510b.after flashing the bios of the laptop does not start .it displays the same message (your bios did not complete the 6510 b update) and turns off. I cannot access the bios by pressing F10.the bios version was F16 and flash by F20 .will help thank you very much.

  I'll have to return a verdict of laptop motherboard bricked due to a failure of the BIOS upgrade. Sorry, but it happens.

  This means that this would require the replacement of the BIOS chip to make it work again.

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Possibly a hard disk failure.

  http://msdn.Microsoft.com/en-us/library/ff557433 (v = VS. 85) .aspx

  Try to run diagnostics from the manufacturer if you can.