Compaq presario SR1930NX: new installation

Similar Questions

• HELP-Compaq Presario CQ70 - new drive hard = Nothing

  Hi all, computer dummy here and I need help.

  the Seagate Momentus 250 gb 5,400 RPM hard drive failed completely on my Compaq Presario CQ70.

  I bought a new Seagate Momentus 500 gb 7,200 RPM.

  I had Windows Vista installed on my laptop.

  but when I'm the new hard drive, I tried to install Windows XP (that I don't have a Vista disc).

  in any case, I inserted the new drive hard and drive XP OS then - NOTHING.

  just black screen and after a while, blue screen saying windows has been closed.

  When I go into the BIOS I do not see the hard drive and everything, but I can run a hard drive test and it passes.

  I have removed and reinserted the hard drive and run the XP OS several times but still the same.

  did anyone can help this old man so I can get my laptop up and working again.

  Recognizing.

  Andrew

  Hello again, Paul and once again thank you.

  I have a Windows Home Premium OEM installation disc.

  I wanted to wait get your response re Home Premium before I considered a set of recovery discs using the info you provided :-)

  I'll try to install Home Premium if that does not work then I get a set of recovery disks.

  Kind regards

  Andrew

• Compaq Presario 5140: Compaq Presario 5140 windows Installation

  Okay so im trying to install ANY OS I have windows 2000, windows xp and linux. which none will him past the installation phase. It copies everything on the hard drive, but it can not find the disk hard once it restarts to complete the installation. I tested all three memory banks and the ram installed in them it has lots of power and the 2 400 MHz pentium running a little hot, but is a very good. I can do it in the bios but it's no help at all as I can NOT configure the list of devices first start-up, it is simply not available. As indicated in the title is an older compaq presario 5140; around 1998. Please send me an Email with some pointers or help. and my God not spammed not me saying to empty all the thing in a trash can! I like the older computers.
  E-mail: [email protected]

  I found the answer myself. This applies to the Windows XP operating system to not initiate systems with blinking cursor error.

  as with any startup in the bios section.
  
  1 Startup Repair windows running with installation or repair disk and guest disk open command
  2 run the fixboot command
  3. run the fixmbr command
  4. run chkdsk /r /p command
  5. disconnect all IDE connections, then restart. This will update your bios.
  6. make sure that the HARD drive is plugged into the motherboard of the PRIMARY IDE connection.  to find out what he just plug in each IDE plug and restart it until it starts.
  7 replugin other ide connections you disconnected earlier.
  8. check the HARD drive and set jumpers as "cable select".
   
  and BAM enjoy the operating system start now.
  
  Thanks the guy who gave me the generic answer without doing a
  background on the system of the computer in question.

  ID give you a negative vote if I could.

• Installation of restore in Compaq Presario V2000 after replacing the hard drive disk

  I have a Compaq Presario V2000, I had the hard drive replaced at CompUSA.  The drive is a 250 gig to replace the original HD 40 gig.  When you load the restore of the operating system (Windows XP) disc nothing happens just a note on the ethernet controller and the media test failure then exit ROM PXE.  How to load the operating system.  I follow the procedures on the Web site?

  Thank you very much.  After a discussion at CompUSA, they decided to try another HD concert 160 instead of 250. Wallah... OS began the installation of restore disc program.  It is a problem with the new hard drive.

  Help a what to do CompUSA actually tech the problem finally.

  Thanks again!

• Cannot install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57

  Original title: I am trying to install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57 and work willnot installation disk and I downloaded all the driver and Assistant I can find

  am trying to install my printer (hpdeskjetf4580) on my new compaq presario laptop computer cq57 and installation disc don't work and I downloaded all the driver and Assistant I can find and it still does not load. It will download and then extract but then nothing and I went to the file downloads and this is, but when I try to run it it extracts and then nothing again.

  Hello

  • What happens when you try to install the drivers?
  • You receive an error message?
  • What version of the Windows operating system do you use?
  You can try to check and clean the boot, if the problem persists, I suggest to install the software in the clean boot state and see if it works.

  To see how to perform the clean boot, click the link below.

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem followStep 7 to reset the computer to start as usual.

  You also try to run the configuration file after extraction of the files is complete from the location where extracted files were kept.

• Compaq Presario CQ5110F: Extension bays; Point installation

  I have a desk top Compaq Presario CQ5110F, room NP185AA-ABA, s/n [Personal information deleted], card mother M2N68 - LA Pegatron. It was converted from Vista to OS from W7. There is an unused bay expansion, are there materials available to install a floppy drive. There is a power outlet and taken on the motherboard, I have temporarily hooked a older HP Compaq and ever thing floppy drive works but the floppy drive is put in the bottom of the housing.  Physically installing the unit is suddenly upward. Have a lot of old information on small disks and I would like to use the player.  If you have any suggestions I would appreciate it a lot. Thank you, Oscar.

  The simple solution is an adapter3.5 "to 5.25"plate that installs in your unused Bay.

• Need installation disk for Windows XP Edition family fo Compaq Presario S4020WM.

  Hello

  I'm running a Compaq Presario S4020WM and have Windows XP Professional (Service Pack 3) installed.  I got this computer as a gift and it came with this operating system.  The operating system is not a genuine copy of windows (he says it's a version of test on my desktop wallpaper).  The sticker on the computer, says that he supplied with Windows XP Edition original family.  I would like to reinstall Windows XP Home Edition on the computer, but I don't have the installation disc.  I contacted the web site of the window and chat with technical support.  They asked me to contact the manufacturer of the computer for my specific product key installation disc.  My product key is [personal information deleted], my product number is DK214A and the S/N is[personal information deleted].  I know I am not pleased under warranty, but I would be eternally grateful if you could send me the Installation disk for Windows Home Edition for this particular product key.  Thank you.

  Vidya has already pointed out, the HP recovery discs are available for purchase at the third-party provider ComputerSurgeons.com

  There is a direct link to order No. 5069 - 5087 - Windows XP Home SP1 recovery (33NAHERED4) - Compaq discs model S4020WM on the ComputerSurgeons Web site.

  Please send Bravo

• Installation of an EVGA in a Compaq Presario SR5710F 5600GT

  Hello, users of the forum!

  A few moments ago, I bought a Compaq Presario SR5710. I noticed the horrible integrated graphics card (nforce 430 motherboard w / GeForce 6150SE) supplied with the machine, so I'm interested to the EVGA 5600GT graphics card as a replacement. However, I don't know if this replacement will be compatible with the motherboard and its power. A lot, I would like to know if I'll be able to use this graphics card with my current SR5710F. Thanks in advance!

  goldblattster

  GB, here is a link to a power supply which is highly recommended on this forum:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139008

  Another good brand is OCZ.  I used the PSU for more than two years.  They fully support their products.

  Please check the measurements of your current diet and news for you ensure that she never goes in the space provided.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Problem with the installation of the graphics driver on PC Compaq Presario

  Hello.

  My computer is a Compaq Presario SR5450F using Windows Vista 32-bit. I'm updating the graphics driver, and I downloaded it from the HP site. It is the only driver available for my PC model of the manufacturer that is listed on the site. However, when I try to install it, I get an error message saying that my computer does not meet the minimum requirements for the update. How my computer may not meet the minimum requirements for an update especially for my computer? Can someone help me with this please?

  You have added an additional graphics card?
  What version of driver currently installed?

  I recommend to install the latest driver from nvidia.com.

• Where to buy the new screen? Compaq presario cq62-206SO

  Model Compaq presario cq62-206SO

  The best would be 100 USD or less shipping and display. I live in Norway.

  Note * I looked on eBay but I find not all screens for my model

  Try laptopscreen.com.  They ship all over the world, and the screens are usually less than $60.

• Compaq Presario CQ60: Wireless driver Compaq Presario CQ60

  I recently changed the House, but all with a modem of fastweb. The model of modem is the same as that of the old House, but they changed the modem gives me a new and my Compaq Presario CQ60 is no longer connects to the Internet, but only for the modem. Connection network tells me that the network is not identified and the internet does not work. I tried the modem power cycle and install different drivers, but nothing worked. What can I do?

  Hello:

  Your laptop is probably the Atheros AR5007 wireless network adapter.

  If so (you can check by going to the Device Manager, expand network adapters device category to see the name and number of the model wireless network card), this driver installation normally solves this problem...

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54972.exe

• Compaq Presario C700: Wifi 'local only' Compaq Presario C700

  Hi I need a driver updated for Vista so I can use the wifi on my Compaq Presario C700 with a router today (2014)

  That is available?

  Hello:

  If your laptop is an Atheros AR 5007 wireless card, then you must install this driver.

  You may need to uninstall the old driver if just this driver installation does not change the date and version of the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  You can read my post on this problem below...

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Atheros-WLAN-driver-fixes-connection-issues-with-many-new/TD-p/701407

• Compaq Presario SR1214NX desktop PC: update BIOS for SATA HDD?

  Hi CV Experts.

  In 2004, I bought a HP Compaq Presario SR1214NX desktop PC. Now, leave the original hard drive and I bought a new Seagate 500 GB SATA hard drive. I thought that this would work because the PC MoBo has two SATA connectors. After installation, I noticed the drive is not detected. I checked the BIOS but not hard listed. The installed BIOS is "BIOS Award BIOS Core Version 6.0 revision 3.10 26/07/2004.» What can I do? Is there a BIOS update available?

  Help, please!

  

  Do more research on this issue, I think that this motherboard may not have native support SATA. You can use ports SATA via Windows after you have installed the necessary drivers. I suggest that you add a primary as hard drive IDE PATA drive and load Windows. Post windows installation, install the necessary SATA drivers and plug the secondary drive SATA for use as a hard disk.

  I'm sorry for all of the early confused communications.

• Upgrade memory - Compaq Presario SR1630NX

  Planning the upgrade on my HP - Compaq Presario SR1630NX memory. Before buying a product of memory, I want to make sure it is compatible with the Compaq. Info on the Compaq Presario SR1630NX memory is as follows: 1) 512 MB (2 x 256) memory installed in the 4 slots 2 DIMM; (2) 2 4 DIMM slots open. (3) type of memory is 184 pins DDR SDRAM. It is a bit confusing when you try to sort the different products available memory. Identified the PNY Memory twin 2048 MB PC3200 DDR 400 MHz memory (2 x 1024MB), Model #MD2048KD1-400. Memory is this product compatible and recommended? Otherwise, any suggestions?

  Hello

  JJM says:
  I ordered the Crucial memory upgrade kit. Then will come the real installation. I'm a little tentative trying to change modules of memory because I've not done this before. Are there problems I should be aware of that I open the SR1630NX, find the motherboard and memory sticks, remove and install new?

  It's really very simple.

  All it takes is patience and attention to the location of the index in the module and the game inside the DIMM slot.

  Unplug the power connector from the power outlet.

  Open the case.

  touch something metal in the case with your hand to dissipate static electricity from your body. I actually always use an anti-static wristband.

  Press the tabs on each side of a module locking and it comes out.

  use the thumb and forefinger on each end of a module and remove it carefully.

  during the installation of the modules to place them in the same locations you deleted the 'old' of.

  Search the index of the module tab and the tab corresponding inside the ALS DIMMt.

  Use the slots on the inside and under the locking tabs guide to guide the module in the DIMM connector correctly

  now, use your thumbs to the top end of the module for shake it gently in the DIMM slot.

  you will know that it is in place as you feel / hear a click.

  now check to make sure that the locking tabs are in place at the ends of the module.

  Repeat the process with the other modules

  That's all there is to it.

  Kind regards

  ERICO

  .