Compaq presario sr5010nx does not recognize cpu

Similar Questions

• Compaq Presario SR5123WM does not turn on

  Compaq Presario SR5123WM does not illuminate. Green light on the back is the only one that lights up. Fans don't come on. It is plugged. No lights on the keyboard or the mouse. Haven't added a new hardware or software. the fans were working and the keyboard and mouse worked, but the monitor would not come on, now nothing.

  I thank very you much for the quick response. The instructions with the videos helped. It was the power supply.

• HE commands to work - Compaq Presario SR5000 does not start

  I have a Compaq Presario SR5000 running Windows Vista Edition family basic and once we got in, I first cleaned the internals to the air compressed, then tried to start, and it failed, so recommended BIOS I run the Startup Repair tool and so I did, and the startup repair couldn't fix the computer "automatically".

  Now, I run the system restore and I tried to restore the computer to its last Windows Update, and I got the error code 0 x 80070002, meaning that the system cannot find the specified file.

  Specifications for the Compaq Presario SR5000 I have:

  AMD Sempron LE-1250 to 2.20 GHz

  2 GB PC2-6400 DDR2 SDRAM Samsung

  WDC WD3200AAJS 320 GB HDD at 3.0 Gbps

  Phoenix BIOS CMOS review 5.16 12/11/2008

  Windows Vista Home Basic

  HP M2N86 - THE mother

  Power supply PS-5251-08 LiteON 250W

  Well, if this is the case, then I think you may try to access BIOS, if that does not work then go ahead with the HARD drive option. I had this problem before and I wiped the hard and it worked eventually. If this does not work, I will try and find a different solution.

  -Steven Jacob Dallas, TX

• Presario c304nr does not recognize sata HP

  I repartitioned & sata HD format several times for my presario c304nr, it will not recognize the HD so I can't loa WinXP.
  Because the original HD is gone, there is no OS. Whay is the precedure support Windows XP in this laptop?

  poldracker

  Well it is almost a lost art now, but you will need to load the SATA (ich7) driver during XP Setup using the F6 method. A usb floppy drive is useful or you can actually do a XP CD personalized with drivers 'slipstreamed' in the contents of the disc by using a program called nLite.

  http://www.nliteos.com/

  Google Intel SATA F6 drivers and nLite XP CD and you will find the info you need. Good luck.

• Compaq Presario F768WM does not start

  I have a presario F768 that no longer starts.  Blue power light is stable, power cord.  When I press the power button, the blue power lights the button lights up with the power led and hard drive indicator.  After a second, all the lights go out.  power indicator at the front goes out for a second, then back.

  I tried the hard reset, remove the memory and disk hard and always the same symptoms.

  It started after an update Vista hung and computer had to be turned off manually.

  Looks like your motherboard has gone bad, I know that cell phones series F700 comes with NVIDIA GeForce Go graphics. What plauge of HP and Compaq laptops. what you call sounds just like what everyone has experienced this same problem.

• Compaq presario sr2017cl does not connect to internet

  I have an old computer from sr2017cl that I let my sister use but recently had do a reformat on it and I got the updates of this Web site, but NIC intigrated drivers has no effect because she still can't get on the internet. I know that this is not a problem with our internet connection because I am logged on my desk typing this. Please will someone help I tried to help him at least four months. I know that before the reformat the computer connected to the internet since before she, it was my computer (partly the reason it had to be wiped) thanks in advance to anyone who can post a useful solution for this.

  Hello:

  According to the specifications for the PC, it came with Windows XP.

  Try to install this chipset driver and see if that gets the drivers for the network card.

  http://www.nvidia.com/download/driverResults.aspx/9701/en-us

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• The Compaq Presario CQ41 does support 64 bit OS?

  I went in a chain retailer and I noticed the Compaq Presario CQ41 was running Windows 7 Home Premium 32 bit, but had 4 GB of RAM installed (which he could not fully use). The stafff I asked why and they said HP/Compaq laptops cannot run 64-bit.

  The Compaq Presario CQ41 does support 64-bit so it can used the entire 4 GB of ram?

  The Compaq Presario CQ41 will also support a 64-bit Windows 7 operating system.

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• Windows 7 does not recognize my color and barnes noble nook

  Windows 7 does not recognize my color and barnes noble nook.  It recognizes my external WD hard drive, but when I plug my nook, plug-and-play do not come and tell me that he has found a new device.

  How can I solve this problem?

  Angi

  ______________________

  My personal website:
  Absolutely of Angi
  http://absolutelyangi.com
  _________________________

  Dell Inspiron 530
  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 32-bit
  Processor: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz, x 64 family 6
  Model 15 Stepping 11 processor Count: 4
  RAM: Mb 3061
  Graphics card: Intel (r) G33/G31 Express Chipset Family, 256 MB
  Hard disks: C: Total - Mo 476929, Free - Mo 349361;
  Total I: - Mo 476937, Free - Mo 363385;
  Motherboard: Dell Inc., 0FM586, CN736048B800IW.
  Antivirus: Kaspersky Internet Security 2011 - 11.0.2.556

  Look at this thread, third substantive post.

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/win-7-won-t-recognize-nook/m-p/694110/message-UID/694110#U694110

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• 2015 CC Photoshop does not recognize nvidia gt630m

  Hello.

  I know it's a common question but I want to use all the power of my laptop.

  So my laptop based on the Core i3 - 3110 m cpu and nvidia geforce gt630m gpu 2 GB, 8 GB of ram. 8.1 Windows x 64

  application version - Adobe Photoshop Version: 2015.1.2 20160113.r.355 x 64

  version of the nvidia driver is 364.72

  All the drivers are up to date.

  The problem is Photoshop does not recognize the gpu nvidia and uses only integrated intel hd 4000 instead.

  

  Well, I tried to manually select the gpu from nvidia Control Panel

  

  and when I did - Photoshop not just recognition gpu, empty empty preference section:

  

  also in these cases I get an error when you open any image:

  

  According to official information, my gpu (nvidia 600series) has been tested and should work fine.

  Well, I found a solution in the forum of nvidia, but it's barbaric and disabled-switching automatic of the gpu on the entire system.

  In addition, in Lightroom, all is ok:

  

  I thank you for the attention, hope that my problem would be solved.

  Well, ok, adobe support cannot resolve this problem, I got it.

  I tried many things and spent some time on it. Program running as administrator, choosing gpu in nvidia Control Panel, install different versions of the drivers and all with cleaning system and the registry. Everything was useless. But.

  I found the solution.

  I have uninstall Adobe Photoshop CC 2015.1.2 (20160113.r.355) - clean registry and install the previous version - Adobe Photoshop CC 2015 (20150722.r.168).

  Figures that newest version of PS work well with nvidia gt 630 m, perhaps, it has not been tested at all.

  He can hardly qualified as a solution but now Photoshop sees my gpu at least.

  

  Hope Adobe will fix this problem in the new version of Photoshop. Maybe this can help someone.

  Best regards, wire.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.