Compaq presario sr5510f #, vista Home premium, 32-bit, service pack 2.

My registary is damaged, windows will download not some updates from HP, error 31, I uninstalled the adapter isatap #2, advised, impossible to reinstall the network adapter, the dvd player reads no DVD/CD automatically... also when I get a flashing of HP on the bar so far... when clicked low notification disappears...... me up date installed.some time when I click on until this day I catch a virus... APART FROM ALL THIS HP IS VERY GOOD... PLEASE NOTIFY.

my friend, I ran every virus scan, in safe mode with net working... .i have googled... Clean.i know that I have a parasite... but I'm learnig... What do I download to clean my pc... It will take time... lpc

Tags: HP Desktops

Similar Questions

  • Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

    Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

    According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

    "You must update the following plugin:

    • Adobe PDF plugin for Firefox and Netscape 8.2.6
    1. Check your plugin versions on one of the following links:

    2. Update of Adobe Reader (PDF plugin):
      • Within your existing Adobe (If you have already installed) drive:

        • Open the Adobe Reader program in your list of programs
        • Click Help > check for updates
        • Follow the instructions to update
        • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
      • Download the full installer (If you have NOT installed Adobe Reader):
      • After installation, launch Firefox and recheck your version.
  • Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

    The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

    Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

    Acrobat Connect Pro data sheet

    I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

    It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.

  • Error: ERROR_FILE_NOT_FOUND (0 x 80070002) during the Vista Home Premium (32 - bit) Service Pack 2 upgrade

    I tried and failed to install Vista Service Pack 2 for more than a year.  Each time, the resulting error message is:

    ERROR_FILE_NOT_FOUND (0 X 80070002)

    I'm running on 32-bit Vista Home Premium, SP1.  I tried

    (1) installation of SP2 via Windows Update,

    (2) downloading an update standalone (KB948465),.

    (3) Download update of the system (KB947821) tool then reinstalling SP2 with standalone update,

    (4) installation of autonomous update with antivirus off, and

    (5) installation autonomous update after correction of regeistry errors.

    All these methods have failed.  Help, please!

    Hello SheetalPatel

    The following KB and the steps to resolve this problem. Thank you.
    http://support.Microsoft.com/kb/947366
  • I have windows vista home premium 32 bit service pack 2 (never been able to restart in safe mode)

    I was never able to restart in safe mode, he comes back and automatically restarts and begins normal mode.

    The issue I'm having is that I tried to start my computer on my regular account and also I tried to start it on the built in Administrator account and both directions after I login I get a screen dead (black on the administrator account and purple on ordinary account) and it is just here doing nothing.

    I tried for hours now.  I read on possibly DΘmarrer on chest done but then it is my dilemma it will not load and it has never loaded in SafeMode since day 1.

    Thanks Bill Gates for such a piece of c r a p like windows vista.

    Any ideas on how to solve this problem?

    Thank you!

    PS: don't know if this helps, but this computer is an Acer Aspire 5810TZ-4657

    Hello

    This is how to start safe mode:

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    __________________________________________________

    Startup Repair:

    Do a Safe Mode system restore to before the problem started.

    http://bertk.MVPs.org/html/restoresysv.html

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    To reinstall Vista on an Acer, or use DVDs you do download for startup repair.

    This can help you (download files and make your own DVDs).

    Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

    http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

    And here are instructions on how to burn ISO disk images:

    http://www.SnapFiles.com/get/isorecorder.html

    The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

    "How to download a Vista ISO and create a Setup DVD or USB"

    http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

    "How to create a USB of Vista Installation key '

    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    ___________________________________

    You press the left ALT and F10 at startup to start the recovery process to factory settings.

    http://Acer.custhelp.com/app/answers/detail/A_ID/2631

    You can order Acer recovery disks, if they still have.

    How to order the eRecovery discs:

    https://store.Acer.com/store?action=DisplayDataValidationServicePage&locale=en_US&siteid=Acerna

    Also you should have your own recovery discs.

    Read your manual on how to make them through the Acer eRecovery program.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon

  • high cpu use-50-85% kt core uses it. can be linked to an update of windows that will not be installed. Vista Home premium 32 bit service pack 2.

    all started 3 days ago. I thought it was fixed from the start in safe mode & run a scan completes. (Either said by the way cpu still works 80% of the nt in safe mode kernel)

    Hello

    1. are you facing problems during the installation of Windows update?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 2: Try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Hope this information is useful.

  • Windows Vista Home Premium 32 bit Service Pack 2 - Office suddenly abandoned internet (via e-thernet), does not connect unless I have stop and restart manually

    A few days ago I pressed the space bar to wake up my (HP pavilion m8100n) office, and I met several things at once:
    1. the icon of the internet was just two monitors blinks back
    2. a box pops up saying "an audio input jack has been disconnected" (when NO such thing has happened!) and now I have no sound and just an "x"symbol next to the symbol of volume." I tried connect headphones, still no sound at all.
    3. my wireless mouse works most completely (again, I don't have anything) I had to use my Intuos3 Tablet mouse click autour.
    Then I restarted the computer, unplugged and replugged the usb for wireless mouse thing, solved #3.
    #2 is still pending.
    #1 takes a strange turn.
    The computer more remained in mode 'sleep', even if I told him to go to mode 'sleep', and every time he woke up upward, I had no internet (just two monitors flashing back and forth.)
    I went to the Device Manager and unchecked the box that allows the computer to disable internet to save energy, at least now when it comes out of sleep, he maintains the internet.
    The computer also doesn't stop- every now and again, he normally stops when I said to, but more often now I have to force it to close hold the button down.
    The question of the internet has gotten worse. While we had a few problems because of the company's Internet, we called and it is resolved.
    I know the router is not the problem because that all computer laptop in the House can connect to him easily.
    My computer always had problems with wireless cards, is also connected to the router via e-thernet.
    The only way I can work around the issue now is to stop (be it by asking the computer to stop or forcing), from, he and hope I get internet.
    If I don't have internet and instead just get the flashing monitors symbol, I tried to tell the computer to restart, but this does not resolve the issue.
    When it restarts, there not even internet.
    I still close, wait and start again, and * hope * I have internet.

    When I have no internet, and I'm trying to diagnose and repair, it always ends up by saying "Windows cannot solve this problem."
    When I click on network and sharing Center, he says that I'm connected to a 'network unidentified' - which is meaningless, because when the internet works, it says that I'm connected to the private network of our House.
    I tried Googling autour, but I really can't find someone else who has the problem as well as the problem of the e-thernet restart/stop.
    Any help with this would be massively appreciated, I do commissions online my source of income and I need this computer to work, because it's my graphic computer.
    (I've included all this other info in case it helped to identify the problem.)

    All my ports usb does not as well, I found this http://www.online-tech-tips.com/computer-tips/usb-device-not-recognized/ and it seems to have fixed everything! Even the problem of noise!

    Sorry to have wasted your time, thank you for the quick response, however.
  • I have the product key for windows vista home basic 32-bit service pack 2 but no cd, please help me

    I have a right problem, my computer laptop need to format I have product key for windows vista home basic 32 bit service pack 2 but no cd, please help me

    Hello

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Compatibility problem XP Dell Wireless 1395 mini-map WLAN driver currently installed Vista Home Edition 32 bit Service Pack II

    Hi, my OS is Windows Vista Home Edition 32 bit Service Pack 2 - installed on XP by the owner without first unintalling XP.  Although my Device Manager lists the mini-map Dell Wireless WLAN 1395 as working properly, what Windows says that it has stopped working correctly because the driver installed is not compatible with my current operating system (just one of the many questions).  Although I can get online wireless most of the time, IE and Google Chrome often freeze and there are a few minutes, I got a blue screen - not for the first time - that shut down Windows.  I note the other error message information that a fatal error has occurred that required Windows stops, so am not sure that the two problems are related or not.  I tried to find a compatible driver for what I assume is a WLAN Mini card for the original XP OS on the compatibility of Vista site, but there is no driver is listed for the Dell Wireless WLAN mini-map 1395.

    I have the Vista installation CD, but not the verification code necessary to reinstall.  It will appear somewhere on this computer under the program or the ancillary system (information) available to administrators?

    Just out of curiosity, there is a feature of rectangular white USB printed with the name "Biogear" attached to one of my ports, although he is not listed among devices on my computer since the computer laptop original owner died and I can not ask what is its purpose or what program it was meant to facilitate. I tried to remove it and it came out (the envelope detached the part inserted into the USB port) without affecting my ability to access the Internet wireless.  An internet search has a line of golf apparel and a few articles in German... Any ideas?  Thanks, Lara

    If the original owner installed Vista on XP, you need to reformat and do a fresh install of Vista or you will continually have problems multipling. If the original owner is an update from XP to Vista it is OK. However, the problems that you're seen suggest the original owner installed Vista on XP. Verification code (if found on the computer) will not be for Vista but for XP. As long as your operating system is installed, you can retrieve the key with Free Key finder software, do a search and you will find them on the internet. Also if you have the CD and ask for a new key to Microsoft you will get it at a very low price, I don't know no current tax, was $ $10,00. Since you are not the original owner (and the first owner died) both of these options may not be totally legal, unless you can provide proof of purchase or the person deseased was a member of the family.

  • My E drive stopped reading CD/DVD. I have a desktop compaq with Vista Home Premium w / all service packs downloaded. My E drive doesn't recognize any disc in the drive.

    How can I get my E drive working again?  I inadvertently stopped a backup file and ejected from the disc without it completed stopped.  Now, he does not recognize the disc.  Please help me.  Computer: Compaq (Desktop), Windows Vista Home Premium, Service Packs 1 and 2.

    Hello

    Check with the support of Compaq, their online documentation and drivers and their forums for
    known issues.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Is not start the BITS on Windows Vista Home Premium 32 bit service

    I'm unable to start the BITS service on my computer.
    I use Windows Vista Home preimum 32 bit OS.

    I tried the following solutions that I found here.

    (1) sfc/scannow
    Result:
    =====
    C:\Windows\System32>sfc/scannow

    Start scanning system.  This process will take time.

    Start of the phase of verification of the scanning system.
    Full check of 100%.
    Windows resource protection found corrupt files but was unable to repair some of th
    EM.
    Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
    C:\Windows\Logs\CBS\CBS.log

    C:\Windows\System32 >

    (2) delete the files qmgr0.dat and qmgr1.dat download/ProgramData/Microsoft/network directories.

    I also tried using BITS Repair tool downloaded from the microsoft web site, but no luck.

    When I start the BITS service, I receive the following error message.

    Please suggest me how to solve the problem.

    The service Background Intelligent Transfer Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

    Concerning
    Yannick DEVOS

    I tried to run the Norton removal tool.

    No luck.

    Finally, I reinstalled my OS. When I tried to restore using Windows restore, some applications do not work. Therefore, I have reinstalled my OS.

    Thanks for your great support.

    Concerning
    DeVos

  • Recent problem with very slow internet browsing on all browsers Windows Vista Home Premium 32 bit

    Separated from this thread.

    Hi all I'm having the same issues as Theresa in the thread above split. I have Vista Home Premium 32 bit service Pack 2 with all the installed updates (automatically done!).  Within 3 months, this PC at home that was formerly an excellent navigation device became very slow when you browse using IE, Firefox or Chrome. It takes 30 to 50 seconds to load any web page (Yahoo, eBay, etc.). I followed all the instructions suggested to Theresa in SafeMode by Bill Smithers. Resulted in nothing other than a few cookies and Wetherbug I killed. I also run McAfee total protection and Spybot S & D every 3 days with nothing found.

    I have reset my browsers to the specifications of the factory without change.

    Comcast is my internet provider high speed and my speedtest returns 65 - 75 MB/s download and 11 Mbit/s upload very regularly. I connect directly to the bridge. I had Comcast out and they swapped unity Arris of a unit of Cisco beefier but that changes nothing. Other devices on my network domestic perform very well and do not have this problem.

    When I browse a site the CPU spikes up to 88% use in 45 seconds and is stable at 50% usage 1.7 GB memory.

    The only thing I can infer is at this time that something happened to the operating system during automatic updates or some other setting has been changed.  I could use any help or suggestions you may have! Otherwise, I love this OS and have not had any problems. Thanks, Dhoffa

    Tune Up

    Internet Explorer

     

    To improve performance for IE, you can reset internet Explorer to the factory settings. This will disable memory addons chewing and bar tools, etc. that you've installed over time.

    In Internet Explorer click on Tools in the bar and then Internet Optionscommand. Go to the Advanced tab, and then click the Reset button.
     
     
    Or disable/remove specific ones, in Internet Explorer click on Tools for button on the command bar - Manage the Addons - enable or disable Addons - select the addin - Remove or disable the button.
     
     
    There's a Fixit
     

    Troubleshoot Internet Explorer to IE quick, safe and stable

    http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

     

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

     
    Other memory hogs
     
     
    You probably many useless auto startup programs. You can disable these programs.
     
     
    Click Start - all programs - Accessories - run and type
     
    msconfig
    
     
    Then go to the Startup tab uncheck the things you don't need.
     
    Use the command line column to find info on the file, if it does not use display menu - Select the columnsdisplay. Use the name of the folder that contains the file and right click - Properties - Details tab to see what it is.
     

    Explorer

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

     
    • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    • Close the windows explore
    • Start Autoruns by right-clicking and choose Run as administrator
    • Click on the Options menu - entries and Filter Options to hide Microsoft tick and clear to understand empty slots
    • Go to the explore tab and uncheck everything to the left.
    • Reset
     

    Difficulty of the Windows system to the performance issues on Windows computers slow Fixit

    Automatically troubleshoot and fix problems of Windows performance. Enhance, optimize and speed up Windows computers and make slow PC faster.
     

    http://support.Microsoft.com/mats/slow_windows_performance/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    --

  • You can use a Windows Vista Home Premium 64-bit OEM license to reinstall a retail copy?

    Hello.

    I currently have a HP machine with licensed Windows Vista Home Premium 64-bit. I intend to back up, format and perform a new Installation.
    I do have a HP OEM DvD and I wonder if I can use Vista Home Premium 64 - bit RETAIL COPY my sister to reinstall my machine.
    Basically, is it possible to OEM license for use on a DvD at retail?
    Thank you very much
    Donn

    Hello

    You can also use this method.

    You do not have a Vista disc that came with the computer to reinstall with, you should have a recovery Partition to do.

    Here is the HP Compaq information on how to use the recovery partition to put your computer in a new State.

    You press F11 at startup or through their Recovery Manager.

    It is all explained in this link.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

    See you soon.

    PS You can also make your own this recovery Partition recovery disks.

  • Serscan.sys missing on Windows Vista Home Premium 64-bit when you try to install Office Jet Pro 8600

    Is there a place to find serscan.sys on a laptop Toshiba Satellite A305, running Windows Vista Home Premium 64 bit?  My Installer to connect wireless to a new HP Officejet Pro 8600 wireless all-in-one printer-scanner-copier-fax machine tells me to find this program, but I can't find it on my hard drive.  I received no installation CD of Windows Vista with this computer when I bought it new.  Any help in finiding or serscan.sys getting and get the printer installed and running is greatly appreciated.

    Hi Excompost,

    Follow the steps outlined in the document below. Let me know what you find?

    Installer Serscan.sys file not found when installing network

  • System recovery fails on the new HARD drive (HP - DVD, Vista Home Premium 64 - bit, DV4-1225dx)

    I have a Pavilion DV4-1225dx who had a hard drive failure. VISTA Home Premium 64-bit.

    Went to buy the oem HDD @ Tiger Direct (0A 56415 Hitachi Travelstar 5 K 320 Mobile Hard drive - 2.5 ", 5400 RPM, SATA 3 G, 250GB, 8MB Cache) but it was out of stock. I bought the proposed replacement (WD Blue 320 Mobile Hard Drive - designed for the calculation of daily - 2.5 "SATA 3 Gb/s, 5400 RPM, 8 MB c...)

    The HP system recovery DVDs work for more than 12 hours and fails. CTOERROR.flg

    ChkErrBB.CMD: Detect an error in the PININST_BBV

    ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

    In addition to a video driver not install, I found:

    C:windows\system32\Drivers\enecir.sys not found

    Recovering the system formats the HARD disk properly. After that the failure of the HARD drive recovery shows that:

    C: 38.8 GB free of 58.0 GB

    E: 2.02 GB free of 12.9 GB

    15 f009wm 8.1 WIN 64 bit
    Office Jet 2540
    P2-1113w WIN 7 64 bit
    G71-340US WIN 7 64 bit
    dv4-1225dx VIsta 64-bit
    zd7000 WIN XP Pro
    xv886 Millennium WIN / WIN XP Pro
    HP deskjet 6980xi
    HP pavilion xt236 / ze4200 WIN XP Media Edition

    found an another Hitachi 0A 56415 and was able to install with recovery disks. Have used the new and more great as a backup USB drive with in a disk caddy.

Maybe you are looking for

  • SCCM 2012 all software updates - download 0%

    We have a SCCM 2012 R2 infrastructure. Software updates were working a few weeks ago. Now, all updates have "TΘlΘcharge (0% complète)" in the Software Center. Other software that is not updated have "TΘlΘcharge (0% Complete)" status as well. The cont

  • call sub vi & using the image overlay

    Hello I'm doing a simple VI for an NTSC video camera using NOR Vision & the framegrabber PCI-1411. With success, I was able to view the live video with the attached VI. Two questions: * my camera to field VI called another VI, precise timestamp runni

  • 16GB SD card is no longer recognized as such

    I have two identical cards of SD 16 GB used for 6 months or more without any problem.  Recently formatted on a VISTA computer.  Now is no longer recognized as an SD card.  Works well as a high capacity flash drive.  Any way to restore the map as a 16

  • If I use WIFI in my laptop is not online

    Maybe someone here can help me. We just moved places and got a new phone line. Since this day I'm not able to use internet via WLAN naymore. I configured everything but some how the laptop is always offline. I did the same with my company laptops and

  • Bug in Windows Live Mail, sorting of columns

    you want to apparent bug report in Windows Live Mail Version 2011 (Build 15.4.3502.0922): When in the folder "sent", by clicking on the To: column head seems to sort e-mails by subject rather than on the field.