Compaq Presario turns on but not start

Similar Questions

• Compaq Presario CQ62-412NR does not start. Caps lock flashes.

  The LED caps lock flashes repidadly with long breaks between each blink, the wireless light and constant and the adapter LED is steady. I read blink codes and determined, he was the processor, but the problem persists after him substituting a known good. I finished the resets power to clear the bios before and after the change of the CPU. I also tried to replace the RAM. Anyone here have a clue whats going on?

  This looks like a problem with the motherboard if you already replaced the CPU and RAM.
  
  It would be probably cheaper to replace the unit at this time only so, fix it or replace the motherboard.

• My printer is turned on but not paper will just slip

  Original title: printer printingmy printer is turned on but not paper will just slip

  printer is on, but does not print

  Hello

  This problem can be caused if the print spooler service is not started or it might not be enough ink in the ink cartridge.

  I would really appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2. What is the brand and model of the printer?

  3. you receive an error code or message?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  5. have you checked for enough ink ink cartridge print?

  Follow the step by step tutorial to help you identify and fix common problems of printer from the link.

   

  Why can I not print? :

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi

  My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi. u ' is the problem with that? Help, please. Thank you...

  Perform a hard reset on the phone. To perform a hard reset, follow the steps below

  • Unplug the PC laptop AC adapter
  • Remove the battery from the laptop compartment
  • Disconnect external devices or devices connected to the laptop. Press and hold the power button for about 15 seconds

• Sound card is enabled but not started

  Having problems with Windows XP Home Edition.  No card sound or sound card is enabled but not started.

  I tried Windows XP, but when the page is loaded the responses do not carry on XP?

  A. reinstall or update drivers for your sound card. Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  B. Si the fact of the above does not work, your sound card may be dead. If you have a desktop computer, uninstall the old card and put in a new its PCI card. It is very costly, less than $25 for a base. If you have aboard, first disable it in the BIOS.

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• No sound, Windows audio services is 'Automatic' but not 'started '.

  My PC runs Windows 7 (Vista upgrade) has a sound card, downloaded the newest manufacturer of PC sound card driver.

  Using "services.msc" and then found Windows audio services is set to "Auto" but not "started".

  Then click on this point, a new window appears which does not have a button 'START '.

  After pressing 'START' and then he said "failed to start audio service of windows on a local computer.

  "1068" error code

  ===========================================

  There is a program that can fix it: but do not know how much it costs, and if it works.

  Thank you

  Skip

  PS: I forgot the the 'password of the administrator", I bought this computer and I'm the only one using this computer.

  The suggested solutions for trying, shouldn't the password, because I won't be able to try.

  Update: tried "System Restore", he said that the system restore does not work correctly.

  I've been using other computers within the home and have not used this computer for a long time after the upgrade from Vista to Windows 7.

  There are a lot of suggestions, I tried it (suggested by someone here). :

  Define 'multimedia class Scheduler' to 'automatic '.

  Set the 'Plug and Play' to 'automatic '.

  Restart the computer, then checked "Windows Audio services.

  now, he says "Started" and "automatic".

  It works fine now.  Sound is back.

  Thank you very much.

  Skip

• Compaq Presario SR2010NX beep code error starting: longbeeppausecontinuinglongbeepspausebetweeneach

  Hello.  My Compaq Presario Desktop PC SR2010NX of 2006 began just not start.  It gives me a sound code of long beeps that accompany pause after each beep and continue indefinitely.  I have tried convenience cheques, and it looks as if it was the 'memory '.  My question, FEI's memory, what cards are hardware compatible with my PC.  I had a breakdown.    to install a new set of 2 GB cards in July - and I had technicians immediately reinstall my old 2 cards (issued factory) replacement cards they have advised me to buy are not compatible, and when I went to pick up my computer, the computer would not start.  I have askede to reinstall my old cards and the computer booted suceesfully, and I left the store!  I am sure that I do not know what new products could be compatible with my old PC.  I thhink 4 GB is too myuch for my computer, and he couldn't get half that - but what brand should be like new hardwrae?  I wasn't expecting my old cards fail when they were resettled - three months since the change of memory attempt - thre months they started normally.  They have been re-hurriedly harnessed and dismissed the case, and then I left the store.  (The tech threatedned me with fear of "motherboard failure", which just made get the computer and leave immediately.  The old cards cannot have been relocated safely.  I'm taking it - but I will not be pushed around.  Of course - as old as mine PC would gradually motherboard failure.  Until it fails.  It was the memory card, but what woud cards my PC take that would be accepted as new hardware and allow my PC to boot up normally, if it is the cards and not yet the motherboard?

  I have now read the post with indicator on the upgrade memory.  It was very useful, and I wrote notes for the Presario.

  It says, maximusmis 2 GB to 1 GB cards/no stamped with the form of the data of motherboard page.

  It is divided between 2 cards 512 MB factory.  It has only 2 slots.

  Thank you.  My Compaq desktop computer has grown on me.  I got Vista bfore and I didn't know what I think.  If it can be repaired, I think 8 years (purchase date 4 November 2006) were fun for the low-end model.  It was a good choice, and I have never regretted buying at what cost.  It was better than expected.

  I haven't used my Compaq Presario continually over the past eight years - that's why it lasted so long!  Dud ut do work, however.  I had retirement is put online last year

  I liked HP Photosmart first 6.5 photo editing.  I liked Wordpad.  Mechanically, it was scientifically.  The material began to go when the built-in CD/DVD internal drive has failed.  I bought and had a replacement (DVD player (cd) internal HP) installed in July 2014.

  The new internal DVD writer HP compatible service pack XP? I have SP2) - I don't think it's about compatible new material.  This caused unable to start new businesses after three months?  New feature of device recognistion and old motherboard? Don't know?  (short circuit)?  I left the old CD/DVD recorder factory in its case - it's there and the springs are working to open and close the casing and check it / A short?  Don't know anything about electric

  Another point, when the original memory card 512 MB on factory 2 cards have been resettled, he was press-technicians to get the computer to boot - so the computer's case has been closed.   (I took the PC on their part awqay as fast it was closed upward).  I thought safe in maintaining clips?  Maybe not securely harnessed.  Could also be from the old factory of 512 memory cards in each clip spare wedge - to alternate which card and which support clip.  I have not tried this or re-cutting to the place of repair.  (I do not have any technical installation and not have ny contact danger here - I do not touch the computer).  It is the matter of repair - these people in a hurry, they sell - they tell you something will work, they overtest, they overdiagnose - they push you autour-yyou never recover your computer to use as is - it is disturbing to go, if you are not a consumer savvy or technical.

  May not be able to take new material old = change motherboard in chipsets, etcs. features.

  Ialso had an error saying years only. IPC Port would not work.  (. COMI is the base model for the CPA called Palm Zire Hotsync Manager.  I don't think the Palm Zire software uninstalled iI, and the message is a (!) origin unknown error message is:. COMI, has failed to initialize.  It's a pop-up error message appeared during the startup process.  The repair people off the message.  The boot has been at once - disconnect - the plugin twice and electric start.  It was based on the plug in the socket, removed and reconnected before the start =.  Technicians tried to solve this problem, but it is not important from my point of view.  All of those, cumulatively, could be symptoms of a hardware change progressive until the end of the use of PC - they are all could be chips card mother falling out or something there (the CD player, the.) Port COMI - don't know about the real, even if start program - which can only be that.)

  I tried the power reset function discussed in the Troubleshooting Online Web pages - 5 seconds to reset, / 15 seconds to reset - power off (unplugged) and hold the power button / stop without plug-in for 5 or 15 seconds (depends on the Web page of the online manual!)  Once, after an attempt to reset of fifteen seconds, the computer has no beep, and he almost made a second rumble noise - but then no change afterwards.  The redonnee start-up sound code beep after that the computer was turned off and then restarted again.

  PC is sitting in his corner.  I don't want someone break while I think about what to do.  He's going nowhere right now.

  This is the first time, it would not start.  I am a bit worried and disappointed, but, I know that my PC is old, and one day, it will fail to work.  That is the reality.  If it fi fixable, I'm interested to hear about the fit-it.  Thanks again.

  Hello @lliil,

  I read what you posted and it seems that you have a hardware problem with your computer. The only thing I can do for you is to provide you with the HP support document: BIOS Beep Codes, which will help you to correctly identify what's wrong with your computer. Given the age of the computer apart from this if you want to know if it can be fixed, I recommend do you get into a local computer repair shop and let them take a look.

  I hope I helped. Thanks for posting on the HP Forums. Have a great day!

• Recovery Manager cannot restore Presario CQ56 & system does not start, the error BOOTMGR is missing

  1. number and product name

  Compaq Presario CQ56

   

  2 operating system installed (if applicable)

  Windows 7

   

  3. error message (if any)

  in the error log:

  Your hard disk (result-failure) id # UAMBXQ - 5H06AK - XD003F - 618U03 - DISK 1

  Start (result-failure) id # UAMBXQ - 5H60AK - XD003F - 40G 403 MEMORY MODULE 2

   

  4. all changes made to your system until the problem occurred

   

  There is no change made to the computer, before the restoration of what the computer should start, however, it would freeze once the system was running. Restarting the computer didn't help, and when I tried to restore to an earlier point, he stated that it was impossible to complete the restore. I tried the factory reset, however, it gave me an error message: "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. Error code: 0xe0ef0003. When I tried to restart the computer later, it gave an error message: "BOOTMGR is missing, press Ctrl + Alt + Delete to restart» How can I fix it?

  305 error refers to a failing hard drive. You will need to replace the hard drive.

  You can check the status of your warranty here.

  If you do not want to repair the laptop you need to contact HP support. If you are in the United States / Canada you can give them a call at 1-800-474-6836. For other countries you will need to visit this site.

  If you do not want to repair the laptop you I can provide useful information, but I'm going to need your product number. This document contains instructions to find the product number.

  I'll keep an eye out for your answer.

• Compaq presario co50-210us - fail to start

  We have a laptop Compaq Presario CO50-210US, yesterday, the screen started to decrease in intensity, and access to programming or internet became slow. Finally, the screen went black and the computer turns off.  Since then, any attempt to power on the results of the computer in the 3 in the FRONT lights flashing 3 times and then nothing.  Power supply is correctly attached and plugged and a hard reset didn't help, and I don't see any other options.  I recently used can air and blew out the dust of all openings, I could find including remove the panels for access to the disk modules and hard memory. This computer has a history of heat so much that he stopped in the past, and re - start not only cooled, (half an hour or more), even though he is sitting on a cooling block at any time.

  Any suggestions on what to do next? And what does the blink code mean?  Any help will be welcome.

  Solution:

  Apparently, the three flashing lights mean 'wall charger is DEAD, and the battery is empty.  Bought and plugged a new charger and the computer works as before.

  Hello jboone,

  Welcome to the HP Forums!

  With your computer starts does not, this can result from several separate components. I've included the document 'computer won't start (Windows 7, Vista, XP)'. Please follow the General troubleshooting steps and then click on the symptom that best describes your problem, follow the steps.

  Please let me know if you are able to get your computer to boot correctly, or not.

  Thank you.

• Presario cq60-224nr does not start, cannot recover

  Hi all

  I'm trying to reinstall Vista on a presario cq60-224nr friends.  It won't start and F11 will not start up the system recovery.  I can't be able to know how to order recovery disks.  Can anyone help this.  ]

  Thanks in advance

  Nila

  I was able to download a copy of Vista and had check the key on the phone, but everything is good and my friend is a happy camper.  After that all I found the recovery partition, still don't know why it wouldn't work.

  Thanks for any help he

  Nila

• Power supply is turned on, but not fans.

  I have a Gateway with Vista Home 5478. My power supply is on, but the vista system will not start. The power light is on, but that's all. I also noticed that all fans, including the fans inside my diet, are dead. I changed power supplies, increased from 400 to 430 watts, and it has not changed a thing. Is this maybe my motherboard?

  It looks like a hardware problem.

  Contact Gateway if under warranty.

  If this is not the case, contact a local and trusted computer repairman.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem Bluetooth: "your Bluetooth Radio is turned on but not detectable."

  Hello

  I've been using a bluetooth mouse with my laptop for over a year, without any problem until a few days ago. I get the error message "your bluetooth radio is turned on but no detectable" in the taskbar, whenever I turn on the mouse and press the blue button that makes it detectable.

  I swapped the batteries for the mouse and set the properties of the Bluetooth Support Services > startup type on properties of Services of Support Bluetooth and auto > Log On "Local System account".

  I tried to turn on Bluetooth settings > Options > "allow Bluetooth devices to find this computer." However, when I apply these settings, I get an error message that says: "an error occurred while Windows saves your settings. The Bluetooth device may be disconnected.

  Can someone help me with this problem?

  Thank you

  Chris

  Question? What computer Dell laptop do you have? A problem on Dell laptops, I discovered is how they have the configuration of the switch without wireless/Bluetooth. What happens when one of the drivers either wireless or Bluetooth out of here that the switch to turn off only turns a large and not the other. What I would say to do is to uninstall your Bluetooth drivers then reinstall the driver from Dell. Make sure that during the uninstallation of turn show devices hidden in Device Manager so you can see all the blue tooth on your system devices. Reinstall after rebooting the computer and make sure that the switch is turned on; After restarting, try to reinstall your Bluetooth devices and see if there detectable.

  Let me Know

• Modem is turned on but not Internet

  Original title: ADSL modem

  Hello

  the ADSL modem is in my computer turns on but mycomputer is not connected to the internal

  How to set up

  Thank you

  Hello

  Thanks for posting your query to the Microsoft forum.

  I understand that you are facing problems with your internet connection, I will definitely help you with this problem.

  I would like to know;

  1. What is the brand and model of your computer?
  2. Do you receive an error message/code when connecting to internet?

  This issue could result due to these reasons:

  • This problem may occur if you already have an active broadband connection.

  • This problem may occur when another device with a driver that is not compatible with Windows 7 is in conflict with the modem.

  Please try these methods below and check the status of the issue.

  Method 1: run it Network troubleshooting.

  Try to run the Network Troubleshooter that can help you solve the problems with the internet connection.

  Using the troubleshooter from network in Windows 7

  If the problem persists, follow method 2.

  Method 2: Remove and re-create the wireless network connection.

  To remove and re-create the wireless network connection, follow these steps:

  1. Press the Windows key on the keyboard > type ncpa.cpl , and then press on ENTRY.
  2. Right-click your wireless network connection and then click Properties
  3. Click the wireless networks tab.
  4. Under preferred networks, click your wireless network, and then click Remove
  5. Click view wireless networks.
  6. Under the management of the network, click Refresh network list.
  7. Under Choose a wireless network, click the wireless network to which you want to connect, and then click on connect.

  If the problem persists, follow method 3.

  I suggest you follow the procedure described in the given Microsoft help articles below:

  Wireless and wired network problems

  How can I troubleshoot network card?

  Additional information:

  Why can't I connect to the Internet?

  Please post back with the results and the information requested, we will be happy to help you further.

  ____________________

  Thank you best regards &,.

  Isha Soni

• RE: Compaq Presario 732US, NIC does not work after upgrade to Windows XP SP3

  Yes, it's an old.  Compaq Presario 732US - care.  <>

  OK reformatted to give to my sister.  Had to manually installed Windows XP SP2 because the verson reformat is so update the old windows would not work with her.  After graduating on windows, update was very well and made a 140 update article.  Installed everything fine.  restarted and did windows update again and it came with SP3, which has installed fine.  EXCEPT after restarting, my network card went caput.  Said my ethernet is unplugged little matter what I do.

  So I unplug and put in another computer without touching anything and it works fine.  So the problem is with the Compaq Presario 732US.  I guess that I need drivers compatible with Windows XP SP3.

  Any idea where I can get them for such an old laptop?  Which ones to get? If I should take off just SP3 and not to date him? And if the pilots there was even the answer?

  Thank you in advance to any of you out there who can help meh.  :-)

  Try to use Device Manager, right-click the network card and choose uninstall. Restart the laptop to see if XP can install a working driver.