Compaq Presario V3118AU Internet does not work after update BIOS and Broadcom Wireless Driver!

I posted here yesterday on my computer because I have updated the Bios program with the update of the BIOS of 2007 and after that my internet no longer works.   The advice I've gotten is update Broadcom driver wireless as well as I did yesterday but the same result.    I was told also that if all things go wrong can I downgarde my Bios program that imposible because the older version on my computer model page is actually installed now on my computer.  I have run out of idea already of what else could be done please help.    Sometimes wireless connection to connect to the router but often difficult and if I am connected I can't go to the internet and to connect to the Local network I just get limited connectivity.

Can someone please tell me what to do to solve this problem.

Thank you very much!

You are welcome. Let us know how it goes.

Tags: Notebooks

Similar Questions

  • T410 CTRL key does not work after update BIOS to 1.45 (German keyboard)

    Dear community,

    I updated the BIOS of my TP T410 (2522), German keyboard, to 1.45. After the update, both CTRL keys don't work anymore. Ditto for the AltGr key. When I switch to CTRL FN in the FN key BIOS - as supposed - works like the CTRL key. But when I turn off again the FN returns to his good funtion and CTRL does not work.

    When I connect an external keyboard via USB it works perfectly.

    Any suggestions how get the CTRL key works again?

    Best regards, Simon

    Hello

    turns out be a hardware fault. Swapped keyboard and it works again.

  • RE: Compaq Presario 732US, NIC does not work after upgrade to Windows XP SP3

    Yes, it's an old.  Compaq Presario 732US - care.  <>

    OK reformatted to give to my sister.  Had to manually installed Windows XP SP2 because the verson reformat is so update the old windows would not work with her.  After graduating on windows, update was very well and made a 140 update article.  Installed everything fine.  restarted and did windows update again and it came with SP3, which has installed fine.  EXCEPT after restarting, my network card went caput.  Said my ethernet is unplugged little matter what I do.

    So I unplug and put in another computer without touching anything and it works fine.  So the problem is with the Compaq Presario 732US.  I guess that I need drivers compatible with Windows XP SP3.

    Any idea where I can get them for such an old laptop?  Which ones to get? If I should take off just SP3 and not to date him? And if the pilots there was even the answer?

    Thank you in advance to any of you out there who can help meh.  :-)

    Try to use Device Manager, right-click the network card and choose uninstall. Restart the laptop to see if XP can install a working driver.

  • HP Pavilion g6 (B1X18EA #ABH): switch to Internet does not work after update of 10 64-bit Windows

    Today I updated my laptop Windows 7 to Windows Home 64 bit OS 10. Everything seems to work fine, except the WIFI. Windows can't find my card, but don't wake him. My button built-in wifi (f12) got a red light on the subject, even when I pressed it. I tried the buttons Windows 8 wireless driver, but I does not solve my problem. With this driver installed the button turn the power Modeavion. Not between WIFI. Also the wifi settings WIFi will go off. When I try to turn it on, it turn on directly to 'off '. Internet connection cable works flawless.

    I gues it's a driver problem, so I was wondering if there is a next pilot? Or is there another way to turn it on.

    Please help me. It is very annoying.

    I've read som other forums and I came tot a solution:
    1. install Windows 8 button wireless driver
    2. perform a hard reset
    3. reboot the system
    4 boot BIOS tot, load default values
    5. the wifi button works.

  • Audio Jack does not work after update bios

    I'm not able to use my my helmet after I've updated my BIOS and driver audio audio codec IDT high definition.

    I have a probook 4440 with windows 7 (64 bit) OS. Help about my problem?

    Hello:

    The only suggestion I can offer is to perform a hard reset of the laptop.

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=376999&prodTypeId=321957&prodSeriesId=376999&ObjectID=c01684768

    Paul

  • ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

    After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

    Would appreciate any help.  Thank you

    Hello

    If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

    When reinstalling, restart the laptop.

    Kind regards

    DP - K

  • Right shift key does not work after update BIOS on the Satellite A200 - 28 p

    For some reason, after I updated my Bios, my right shift key doesn't work and no not my FOUR and SIX button, so why I write in words: (,

    I tried to reinstall windows, t hasn't made a difference.
    I tried to roll back the drivers for the keyboard, as well as the move towards the US version of the keyboard, nothing has helped.

    Thank you

    Hello

    What cell phone do you have exactly? And did you use the correct version of the BIOS?
    Have you tried to set the BIOS to default settings?

  • Touchpad does not work after update BIOS 1.08

    I have an Acer Aspire ES1-711 with 10 windows and when I updated the BIOS to 1.08 the touchpad has become upresponsive after the restart. They keyboard work suddenly quit that I wrote this, I tired to disable and re-enable the touchpad and that caused the keyboard to stop working. This computer might as well be a desktop computer now because you have to use a wireless keyboard and mouse for use... Why must Acer always have a faulty BIOS updates?

    Solved it by installing the IO series Drivers, driver Intel CITY and sideband fabric device driver.

  • Multitouch 511 Acer e5 does not work after update bio

    I've decided to update my BIOS on my laptop Acer E5 511 and afer that my touchpad lost the abilitiy to work on mutlitouch gestures.

    I can't scroll, zoom, or do the right-click by pressing with two fingers at the same time.

    I tried isntaling the touchpad on the official drivers, restarted my laptop a few times but nothing helped.

    If someone had the same problem and found the solution please share, I got to use for functions multitouch now I feel diseabled whenever I use the touchpad just for the cousor Thierry.

    Found the soltion targeting minutes after this announcement.

    You must go to your BIOS or UEFI py parameters pressing and holding you key F2 while the laptop is turned on.

    Here you find touchpad and select 'Advanced Mode', then simply save the changes, and after restarting the laptop the multitouch features will return.

  • Ethernet USB adapter does not work after update to sierra mac

    Ethernet USB adapter does not work after update to mac sierra.

    Please solve this problem as soon as POSSIBLE

    Hello guatamshah,

    If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

    The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
    Reset the management system (SCM) controller on your Mac.

    https://support.Apple.com/en-us/HT201295

    How to reset the NVRAM on your Mac.
    https://support.Apple.com/en-us/HT204063

    If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
    OS X: about system information and System Profiler

    https://support.Apple.com/en-us/HT203001

    If she does not appear in the information system, see the articles below.
    macOS Sierra: If a USB device does not work

    https://support.Apple.com/kb/PH25343

    macOS Sierra: check your device's USB connection

    https://support.Apple.com/kb/PH25567

    However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

    macOS Sierra: Add a network service
    https://support.Apple.com/kb/PH25279

    If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

    Kind regards.

  • As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    This may be caused by the Tab Mix Plus extension

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    You can try to install the latest Dev version of Tab Mix more if you use this extension.

    See the sticky on the forum of Tab Mix Plus:

  • 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

    Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

    In addition, the HID-Compliant touch screen driver is missing.

    Please help me solve this problem, thank you.

    Hi there @BryanHech,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

    How you did update the drivers?

    You use Windows Update?

    Have you checked to see if the driver has been disabled?

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to do a hard reset?

    Have you tried a update the BIOS and graphics driver?

    Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

    Have you tried to Configure the display key?

    Have you tried to activate the driver in touch screen device manager?

    Please follow these steps to see if you can activate the touch screen:

    • Open the Device Manager
    • Find "Human Interface Devices"
    • Expand "Human Interface Devices"
    • Right-click on "touch screen HD compliant."
    • Click 'Activate' (if available)
    • Restart your laptop.

    If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

    To use the system restore in Windows:

    • Go to the Search
    • Type of Control Panel
    • Click on Control Panel
    • Click System
    • Click on the System Protection
    • Click the System Protection tab
    • Click on System Restore
    • Click Next
    • Choose a restore point
    • Click Next
    • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
    • Click Yes to confirm

    When the system restore is complete, you'll be up a pop that says that it has been completed.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Thank you!

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • autorotation does not work after update 8, 1 wind - W510

    I have a tablet with docking station and 32 GB w510

    the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

    I ve installed the latest driver form acer download page and Windows update.

    then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

    What can I do?

    PS the camera does not work

    -solution for me! ----

    I don't know what happened, but I'll tell you what I did not last:

    I have the European version of Windows 8.1 N(without Media Feature Pack)

    1. reinstalled microsoft silverlight.
    2. search for update---> silverlight update available!---> installed!
    3. reset
    4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
    5. reset
    6. Search again---> new available updates updates---> installed
    7. reset!

    now, camera, autorotation and all the apps work for me. I hope this will help you

    Best regards

  • Dual booting of Z3 tone does not work after update Marshmallow

    Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

    I don't think he has a...

Maybe you are looking for

  • How do I play windows media player in Firefox?

    I downloaded and installed the plugin from this site: http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-downloadbut I do not see it in the Firefox plugin section. When I go to a site with windows media player it says that the

  • IMac not watch after update

    installed the latest OS X but the machine does not restart. After pressing the button, a white screen with an Apple in the middle of the screen and a 'download' bar begins to run. At halfway, the machines turns off without any warning. Any idea or su

  • Cannot compile installer with DAQmx 9.6.1 - trouble with multimedia path location

    When I go to build a Setup program that DAQmx 9.6.1, Setup should request the media path.  I have no (cannot locate) a DVD for DAQmx 9.6.1.  I downloaded the drivers, but that the download is not accepted.  It seems that I need the original disc.  Is

  • Spread for the Cluster error problem

    Consider the following diagram: This VI is intended to be used in a chain of the screws. This VI copy a file to a folder and error, try it with a different path of the file (located in a location of "backup") Because of the intrinsic data flow progra

  • How to print a list of the names of the pictures in a file (I have over 700 different names and separate .jpg files)

    I scanned and stored genealogical photos and documents in my laptop.  I have over 700 documents in format .jpg.  All are in a single file.  I would like to print a list of the names of the document and photograph, but not to print documents and image