Compaq SG3-350UK: port USB2 Upgrade for USB3

Similar Questions

• Desktop PC Compaq SG3-350UK - keyboard, occasional and random, gel

  Desktop PC Compaq SG3-350UK, 4 GB RAM, Win 7 x 64 (start Microsoft keyboard drivers)

  In the last month, keyboard started to "freeze" sometimes - for example, you type, sudddenly - nothing appears on the screen-, then a few seconds later - characters appear.

  Have you tried:

  • Restart in safe mode - seems to work ok
  • Updating keyboard & video drivers (no updates)
  • Check that "filter keys" is enabled (they are not)
  • Modification of power saving settings (no effect) USB
  • Change the keyboard (no effect)
  • Control pad works well on another PC (it does)
  • Verification of performance monitor for excessive use of CPU, disk or RAM (everything is less than 20%)
  • Running free Avast AV (updated)

  Would appreciate ideas that everyone has...

  Thank you very much!

  Hey MadCabbage2,

  I'm sorry that you run on this issue. Great job troubleshooting well so far! When I see glitches like this, I love to watch that the process is run in the background. It gives you a detailed breakdown.

  You may already aware of these things, but I wanted to put the information out there, just in case. Over time, the hard drives accumulate data and larger they are, the more time it will take one to access the data, in turn slow down the copying process. Also, when you use your computer, services that run in the background accumulate and can be configured to run on start upward without your knowledge. To check what is running in the background,

  Bring up the task (Ctrl + Shift + Esc) Manager > click on the processes tab > click the memory column in descending order.

  This will put heavier processes, resource-hogging to the Summit. Sometimes the virus can have a course of update service, or another 3rd party program may have a running update service you know on the subject. As I mentioned, these processes could be installed by default starts when you turn on the computer, even if you do not open this program. For example, after you install iTunes, applepush (iTunes update service) will run whenever you turn on the computer. This isn't the only program that sneaks of these services in. Toolbars in the browser will sometimes do the same. You can also check to see what is starting to turn on using msconfig.

  Click on the Start button > Type "msconfig" > click "msconfig.exe" > click on the Start Up tab.

  You can also put a column called Ridge (memory) working set in the process tab. That will tell you what a particular process of the maximum memory usage has been since it was started. Just open the Task Manager > tab click process > click on view > click Select columns > check the memory - peak working set of box, and then click OK. This will give you a better idea of what programs to take a closer look. Anti-virus and Internet browser will naturally have the largest numbers in the column of the art. Others should be questioned. It would help if you could post a screenshot of the processes tab.

  I hope this information helps! I'll keep an eye out for your answer

• Airport Time Capsule 3 to port usb2 and usb3

  Is the usb to Time Capsule on the new Time Capsule 3 to port a port USB2 and USB3?

  A USB 2.0 port.

  (141391)

• How can I connect another monitor to compaq SG3 because there is only 1 VGA port and no HDMI.

  How can I connect another monitor to compaq SG3 series because there is only 1 VGA port at the back and there is no HDMI port.  The operating system is Windows 7. I think to buy vga splitter, I don't know if that will allow me to move images/data between the monitors. Please tell us what to do. Thank you

  It is based on the expected results.  A VGA splitter will give you two monitors but they will display the same image.  If the expected result is two different pictures, maybe something like this will do;

  http://www.Amazon.com/IOGEAR-external-video-card-GUC2015V/DP/B000NJFJJK

  or

  http://www.Amazon.com/STARTech-com-external-video-monitor-adapter/DP/B005G306I2/ref=pd_cp_e_0

  Some will also do DVI: http://www.amazon.com/Plugable-Multiple-2048x1152-1920x1200-DisplayLink/dp/B0038P1TP4/ref=sr_1_1?s=electronics & ie = UTF8 & qid = 1345919878 & sr = 1-1 & keywords = usb + to + DVI

• COMPAQ 510 T1500 1.8 GHZ: CPU UPGRADE FOR COMPAQ 510 T1500 1.8 GHZ

  Hi, I want to improve my laptop cpu but do not know if the motherboard supports it and what upgrade options are compatible with the motherboard chipset

  Hello

  Double post, please use:

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/CPU-upgrade-for-Compaq-510-T1500-1-8-GHz/m-p/5505032

  Thank you.

• How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  Hello

  What is the model of your machine? (cq40 is a series). Anyway, please try this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3805640#N228

  Kind regards.

• How to restore fled ction of ports USB2 on Aspire E15

  Two ports USB2 on my Aspire E15 does not connect what either. My dongle turns on but does not connect to the internet. My printer does not accept commands, nor in the list of connected devices.

  Looking at some other sites, it is quite a common fault with Acer products, so I guess there are some downloadable update to cover this?

  pheasantplucker,

  Looks like you're trying to connect a USB to the Ethernet connection and it does not work, or your connected printer. I guess that you always use the operating system supplied with the laptop and don't have not upgraded to Windows 10 yet?

  The other devices USB (mouse, keyboard, USB key for example), or it is just limited to these two items in the thread?

• CPU Upgrade for Presario SR1110NX?

  Is there an available CPU I can use an upgrade for a Presario SR1110NX? It currently has a Celeron processor (I don't know what type of socket). If not, is there a motherboard I can get low fees for this case that does not require update me all my (old) devices and memory? I don't want to buy a new machine until the summer, but my CPU usage is at 100%.

  Thank you

  Dante

  Hello

  Which will support your card mother MS-6577 (Giovani, Giovani2).

  Socket 478 for Intel P4 Willamette and Northwood 1.4 GHZ to 2.8 GHz or higher processors.

  Here is a link to NewEgg for a card mother microATX replacement. You will need to buy the DDR2 memory, but it's pretty inexpensive. All of your devices will work in this one. You need to replace the power supply. The diagram of the motherboard is not marked ATX is an owner of COMPAQ connector configuration. Try to use it on a new motherboard will probably lead many motherboard smoked and fried

• 4 k upgrade for early 2009 double quad?

  I have a tower in early 2008 with a 914361344 MB AMD Radeon HD 7950 card that can display 4 k.  I have shooting and HD video editing, but I want to start working with 4 k.  I use a Vizio HDTV with a VGA or HDMI input for HD display.  I am looking for a 4 k monitor that displays the output of my card AMD, which has a DVI and two small mini-DVI outputs to display 3 signals at the same time.  When the computer starts, it will default to the DVI signal.

  I've been shopping on Ebay and saw a monitor Dell 28 '' with a Display Port entry.  I'm not familiar with this port.  Should I be looking for a port DVI display for best film adapter, or should I get a monitor with a DVI 4 k?

  Should I consider getting a screen with a refresh rate of 60 hz to 4 k?  Any other consideration?  I know that my Tower is long in the tooth that cost a big consideration.  I'm not going to upgrade to a new computer with Thunderbolt.  Thank you.

  Nope, just to get a screen with an entry-no need to worry about DVI or VGA DisplayPort that I don't think that support 4 k, but I could be wrong.

  HDMI can support 4 k Maybe, but I'm not 100% sure on that.  Just go with a DisplayPort monitor and you should be fine.  On the single conisderation for Dell, is to wake up the monitor can be problematic.  BTW, I've never heard of a mini-DVI port, but yet again, I could be wrong.

  If it were up to me I would buy a screen of 4 k in the blink of an eye--as big as I could get, however, it is not mine.  I thought that 4 k has been at a refresh rate 30 hz, but I'm probably wrong about that, too.  The only thing stopping me now is a lack of money. Storms Yamakasi has a screen of 40 "4K for $550 on ebay

  I'm sure you can find some good deals and good quality there. Apparently 4 k monitors greater that it will cost you a lot more... Well there ' tis

  John B

• Maximum memory upgrade for HP Pavilion computer g6-1209sa laptop

  Hello

  I need to know how much memory can I add to the exsiting4 GB in my HP Pavilion laptop 1209sa g6 (product ID A5G99EA #ABU).

  Here are the memory of the HP Advanced System Diagnostics.

  DIMM 1
  ======
  Device Locator: location of down 1
  Manufacturer: Samsung
  Serial number: #.
  Part number: M471B5273DH0-CH9
  Memory size: 4096 MB
  Memory speed: 1067 MHz
  Memory type: DDR3
  Type Detail: synchronous

  DIMM 2: not installed
  ======
  Device Locator: location of down 2
  Manufacturer:
  Serial number:
  Reference number:
  Memory size:
  Memory speed:
  Memory type:
  Detail of type:

  ---------------------------

  The following information comes from CPU - z:

  DMI physical memory matrix
  Location: motherboard
  use: System memory
  Correction: no
  Max capacity: 8192 MB
  Max # of devices: 2

  DMI memory device
  designation: low - Slot 1
  format: SODIMM
  type: unknown
  total width: 64 bits
  data width: 64 bits
  size: 4096 MB

  DMI memory device
  designation: low - Slot 2
  format: DIMM
  type: unknown
  total width: 8 bits
  data width: 8 bits

  ------------------------

  Thanks for the help!

  san928 wrote:

  Thank you very much for your quick response!

  However, I have noted that several Web sites that specialize in upgrading memory indicates the maximum capacity for my laptop model is of 8 GB. Do you think I can still do trust the generic service G6 guide?

  http://www.offtek.co.UK/RAM-memory-2/HP-Compaq/HP-Compaq-laptop-memory/Pavilion-notebook-G6-1209sa/mid235081/

  http://www.mrmemory.co.UK/memory-RAM-upgrades/HP-Compaq/Pavilion-notebook/G6-1209sa

  http://UK.crucial.com/GBR/en/compatible-upgrade-for/HP---Compaq/Pavilion-G6-1209sa

  You are welcome

  I am convinced that more Crucial that G6 service guide in this

  If the Crucial system scanner scanned your compatible upgrades system & lists - they guarantee this upgrade, otherwise you will get the money back.

  Concerning

  Visruth

• white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  Computer works wonders but new applications are not supported by 10.6.8

  Unless you have a specific reason to choose one plus one, El Capitan.

  (144668)

• Can I install Firefox in a way that will never check an upgrade for all users?

  In the approximately 500 mV VDI environment I would like to disable checking of upgrades for users of all virtual machines. We cannot update Firefox until we have ensured that the new version works with specific tools. Virtual machines are linked clones that are being refreshed to their State before logon after users log off. This causes the popup to come upgrade whenever users connect. Users are not allowed to upgrade, then it is a nuisance that I would like to eliminate them.

  I found that I can use on: config to disable checking of upgrade on the image, where all virtual machines are created, but cela will not shut it for all users for the user with which the image is kept. Is there a central setting that allows me to do this? Or this would require a change in profile all users? And if the latter, what a change I need to make to their profile?

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

  lockPref("app.update.enabled", false);

• How can I get an upgrade for my Satellite 4010CDT?

  How can I get an upgrade for my laptop S4010CDT / 4.0 NL TOSHIBA?

  Hello

  I guess you're talking about the Satellite 4010CDT
  Did you mean hardware upgrade or update of the software driver?

  If you mean the upgrade of the software so I found some drivers Toshiba for Win95, 98 and NT on page of Toshiba.

• Compaq presario CQ3559IN: CPU & GPU upgrade in my COMPAQ PRESARIO CQ3559IN desktop pc

  Can I upgrade my RAM and GPU for this system? Is there a limit to the (Maximum) upgrade my desktop pc can support? If so what would be the right product to buy?

  Thank you

  Benhur Ar.Jerome

  @jeromebenhur, welcome to the forum.

  Here is the information of CPU/processor upgrade for the motherboard:

  TDP: 95W

  • Motherboard supports the following processor upgrades:

    NOTE: Only the Socket LGA 1156 processors are compatible with this motherboard.

• Power Supply Upgrade for a Lenovo 3000 K100

  Greetings,

  I have a Lenovo desktop computer that I would like to upgrade. Firstly the power supply. I was wondering what is the stronger power supply that I can put. So that when in the future when I purchase an upgrade I won't have to worry about food being a problem. I also noticed that the power cable area is located in a different place when I look at power supplys. Is there a certain format that I need to keep in mind? All the detailed data would be a great help. If you need more going off and then comes the series I left in the subject, let me know. Thank you.

  Hi djmclaughlinjr and welcome to the community.

  Here's a thread on it with instructions to hang the light of power dial.

  http://forums.Lenovo.com/T5/Lenovo-3000-and-Valueline/upgrades-for-the-3000k100-desktop/TD-p/2439

  Kind regards

  Dave