Compaq SR5710F: installation of Win XP pro on Compaq SR5710F

Similar Questions

• Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

  Failed to start installation of Win XP PRO SP2.

  After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

  After this computer hungs in black screen.

  QOSMIO F20-141 for the Federation of Russia
  M/N: PQF20E-02801YRU

  Hello

  Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
  As far as I know the recovery procedure is very easy to use and it should work without any problems.

  Good bye

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Cannot run my installation of Win Xp Pro Cd

  Cannot run Setup from the cd that ORIGINALLY installed win xp pro on my machine because it says that the version on my computer is newer than the Conference on disarmament, well well the only reason I can think of, is that the updates have made the more recent than the original pc version can someone help,

  QUESTION; How to run the Setup program when I get this message please.

  In order to run the Setup program to reinstall windows, put the disc into your computer and start to it, which will give the classical configuration of BACK blue screen and after you format your drive, and windows installs the first part, you will need to return to the mode of windows.

• Update Windows not finding updates/East remained after fresh installation of win 7 pro on the laptop of dell d610 32bits.

  Hello

  I have recently re - installed win 7 pro on a 32-bit computer laptop dell d610 and after installing some updates it now just says: "check for updates...". "on the windows update screen and the green light just continues to go everywhere for centuries if I leave.

  I have also no wireless connection just a wireframe.

  I've added a certain drivers from the dell website including an update of the BIOS.

  When Windows 7 was installed it has 4 drivers problems / missing in the Device Manager and since the update of dell, there are now 2 problems with

  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family and the controller of the network if I thought I had added the driver for this.

  I tried to use them, but they make no difference:

  WindowsUpdateAgent-7, 6 - x 86 (I also tried to install an equivalent standalone update for it and he says just looking for updates on this computer and also keeps going and going)

  WindowsUpdateDiagnostic

  MicrosoftEasyFix50202

  MicrosoftEasyFix20179.mini

  tweaking .com - reset the registry permissions

  Its a genuine product key as it turned on and I think that sp1 is built in otherwise it wouldn't activate.

  I tried to solve this for a week now without success any help would be really appreciated.

  Thank you very much

  Craig

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

• Installation of Win 7 pro on win 7 ultimate

  OK, the first facts:

  My friend has a computer that came with Vista installed.

  Some time before, she had a problem with the computer and brought it to a repairman.

  When she got the computer back everything was in order, but the repairman installed a copy of Win 7 Ultimate instead of Vista.

  Everything went well for a while, but yesterday after an update, Windows 7 has been declared as not authentic.

  She immediately called the guy who told him that it is not surprising that it had installed a pirated copy.

  She now wants to buy a legitimate release of Win 7.

  Now for the questions:

  She does not have the ultimate version of Win 7, Win 7 Pro would be better suited for her. Is it possible to downgrade Win 7 Ultimate to Windows 7 Pro without losing all data on the hard drive?

  In addition, she still the Vista COA at hand. Then it would be possible to just switch to Win 7 Pro without having to reinstall Vista first?

  Hello

  Thank you for contacting Microsoft Community.
  Unfortunately, it is not possible to downgrade directly from Windows 7 Ultimate Windows 7 Professional, without modifying the files. You can not downgrade any Windows like the upgrade. THUS, back up all personal files and other files, and then perform a new installation (will erase the partition and install Windows 7 professional fees). You can then restore the files. Note that installed applications/programs should not be backed up because they can be installed after the installation of Windows.
  This process requires no installation of Windows Vista. But if you plan to upgrade, rather than clean install of Windows 7 Professional, you must install Windows Vista (new installation) first and then proceed to the upgrade.
  Note this upgrade can be made between architectures, i.e., x 86 (32 bit) x 64 (64-bit) or vice versa, even if it's Windows Vista to Windows 7.

• Installation of Win 7 Pro 64-bit on Mac Pro (Intel) with Boot Camp

  Trying to install OEM Windows 7 Pro 64 bit on a Mac Pro (Intel based computer) using Boot Camp (with Apple OS X 10.6). The installation went well until the system reboots to the CD with the OEM Windows 7 drive in the Bay. At that time there a MS-DOS appears on the screen that looks like this:

  1.

  2.
  Select the Startup Type of the CD-ROM:

  There is a blinking cursor (line underscore) after the semicolon, but everything I type on the keyboard appears on the screen when the cursor blinks. I use a USB keyboard connected to the computer for the installation, so I know it works. This blocked me.

  Is it possible that the OEM version is causing this problem? Can I use a regular full version of Windows 7? Do not spend money to buy, then discover it displays the same screen.

  I'll check with both Apple Support, but it seems strange that everything went very well with the installation until the Windows 7 loaded into the Bay. Any suggestions are appreciated.

  Are you sure you are using the right drive?

  The OEM versions include a disc OPK and the Windows 7 installation disc, make sure you use the right one.

  Also, insert the disc, press C on your keyboard and select the Windows 7 disc to boot from it.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Installation of WIn XP Pro Satellite P30-130

  Hello
  I need to install windows XP Professional on a P30-130 Saltellite. Is this possible?
  There is full compatibility?

  Thank you
  Daniele

  Hello

  As far as I know your device comes with Windows XP Home Edition, but you can install professional at any time. All the drivers, tools and utilities that you have on the CD-ROM of the tools can also be used with professional.

  As Tom says check the installations instructions and install all of the components in the order. It is very important.

  Good bye

• Recent installation of win 7 pro refurb

  Installed on a refurbed pc. After that, I found that the motherboard only support usb 1.1. Expansion slots only 2 are both in use or I would simply use a usb 2.0 expansion card. My question is, if I remove the card and install a more recent Council refurbed, can I use the key again? The former Council is worthless for me.

  An edition of Windows 7 for use on a refurbished computer is an "OEM" version, and as such, is related to the first motherboard on which it is installed. You can call Microsoft and explain your problem and they can allow you to re - install on another / replacement card (it can't hurt to try).

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  If you call the phone number does not work:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Decrypt encrypted files and records who have done in Win XP Pro, but now we want to decrypt in Win 7 Pro.

  Hi, please advise me that how can I decrypt my encrypted files and folders now since I got them when I was with Win XP Pro and after all of a sudden my Win XP Pro crash and the installation of Win 7 Pro? I mean, now I use now Win 7 Pro in the lap top, it had Win XP Pro and I did an encryption my files and folders at this time.

  Please notify.

  Thanks & regards in advance

  It will never ask for the encryption keys. Whenever an encrypted file/folder is created, the keys are also created and stored safely in the system. At any time, you can take a backup of the keys (you need, as you cannot decrypt it without the keys).

• Update to Win 8 Pro on Dell - used the extra features Add - key function but now is rejected

  Hello

  I bought a Dell XPS with Win 8 pre installed computer and key in the BIOS.

  I needed features of Windows 8 Pro, so I bought a retail dvd.

  When I pop the disk in the Dell to do a fresh install... it fails. I think it's because the activation key which is located in the BIOS is set to the version 8 to win and will not let me install the Windows 8 Pro.

  So what I was thinking was I could go to add Windows 8 features. It asks for a product key. I get the product key provided with the pro Win 8 of retail disc.  It worked and it comes and goes.  For some reason, the computer crashed. Ok. Rebooted the machine. When I go back to the features add Windows 8 and add the product key, it is now rejected.

  I have a few questions that I hope that you can answer:

  1. is my activation key pro 8 victory at retail now invalid? Shouldn't be able to reuse the key for new installations? He is always on the same machine.

  2. someone with experience with the installation of win 8 pro on a Dell computer with the ordinary 8 Win on the Bios?

  I installed clean installs of Windows many times, but never on a Dell computer. so I am frustrated he gave me these questions.

  Thank you!

  8 win was preinstalled with the Dell XPS.

  I have a full retail version of DVD to win 8 pro.

  It was very weird. If I stop the machine because I dropped. Came back to her and did a few more things. Then I got frustrated by the 'led' search somehow got installed and removed.

  This required a reset. While she has been reset, it said that it was the application of updates.  Ok. It was weird.

  After the reboot, I checked the version of windows, and it is indeed the Windows 8 Pro version.

  So what's happened? I do not know. I can't explain it.

  This is not a update product key. It is a full commercial product key.

  I don't know why it took days and several reboots before something kicks and managed to install from Microsoft.

  I wish I can explain it. I can't.

  But thanks for the quick response and offer help.

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Installation of Boot Camp utility stopped working after that Win 10 Pro was made.  Installer got stuck on step 'realtek' audio  I restarted Windows, but Boot Camp does not resume or restart the Windows installation process-side utilities?

  How can I get the Boot Camp utility to install entirely in Win 10 Pro?  After winning 10 Pro was finished installing, the installation of Boot Camp process began but eventually got stuck at halfway through (for 20 minutes) on stage 'Realtek Audio.   A restart of Windows has not triggered a recovery or re-starting installation of the Boot Camp utility.  Windows, it works, but I have no utilities 'Boot Camp' and can not find any Boot Camp file stored on the side of Windows again.

  Please see Bootcamp 6.0 driver install interrupted for resolution.

• Wise Blackjack who worked on Win 95, Win XP Pro. Win 7 says its installer is not compatible and will not open it.

  I installed this on many machines from Win 95. I now running on several machines of Win XP Pro SP3.
  INSTALLATION of Sage BJ. EXE has a creation Date of the Sep 1998 05, size 24 KB. I tried every compatibility mode selection, WinXP SP3 via Win 95 - Win 7 don't like him for any of them. So I can't even at first base to install it now.
  Research online, I can't find clues for newer versions.
  It would seem that, if it was "mission critical", I will follow a path to upgrade to Windows 7 Pro, so that I can install it "Win XP Mode". Maybe need arises for some other software, but not for running a game.

  The program was designed there is an earlier version of win years, cannot as such that it is supposed to operate an o/s, win7, what is fundimentally different from earlier versions of victory, even in compatibility modes.

  Maybe that is a 16-bit program, and you are using a version of win7 64-bit?

  Even the installation of Virtualwinxp is no guarantee it will install

• Installation of Acrobat Std CD (Newegg) DC [Win 7 Pro OS w / 8 GB ram], received a pop-up "this application cannot be installed on this operating system.  The installation program will end now... "Do I have a faulty disk?

  INSTALLATION IS COMPLETE; claiming the wrong OS.  My computers a Win 7 Pro, w / 8 GB ram and searched 1 TB HD.

  What Miss me?

  Solution...

  Copied all files in a folder on my machine & run 'install' from there.

  Wish that the experts knew it!