Compare the module tool VI to the development base package / edition

Hi all

My company has hired some contractors to assist in reviewing our work of LabVIEW and bought packages of development basis of LabVIEW for them to use (because they do not need to build the final application or something like that).  Imagine my surprise to find that the tool to compare, which is essential to make sizeable screw comments, is not included in the basic development package!

Now, a lot of other references that I found on the web indicates that it is only in the professional package (which is ridiculous for such a basic tool, in my opinion), but a page OR (http://digital.ni.com/public.nsf/allkb/3493C58EA0E842FA86256F86006142C0) implies that compare is now in the full package, and only the line tool command requires the professional set.  Can someone tell me if this is true?

Is there as an even better option, any add-on that I can buy for the features to compare VI added to my basic package?  The page buy LabVIEW (http://www.ni.com/labview/buy/) lists 'Review Code quality' as an option module, but I just thought it just means that VI Analyzer, and comparison feature is not listed in the table (a hunting in big enough witches away from the list, once again in my opinion).  I hate to tell my boss that we need to pass a package of $1,000 to a package of $3000 or $5000 for each contractor, so they will be able to examine the code.

Thanks for your help!

-Joe

FYI, to finish this topic, I finally got an official response from back of NEITHER: there is not any other add-ons or third-party tools that allow a graphic comparison of voluntary initiatives.  So, as previous Seraphim (thanks again) have said, the professional development environment is your only option for the use of this tool.

Tags: NI Software

Similar Questions

  • Problem in the development of Digital Editions 4 in a second profile in Win7

    While my wife and I have our own autonomous computers dedicated, but when we travel, we use a portable Setup with individual profiles. I have, unfortunately, seems improved FROM Version 2 to Version 4 on said computer. On v-2 each user has his own profile OF within their windows profile. During the editing and placement on the first profile Windows, I could install and allow the credentials Adobe for this user, however I have problems with setting up the second user. I used the same login and PW which were used on the original installation, as well as the stand-alone version, but TO dislike it. When I try to move in an e-book that I get 'check the activation'. When I try to disable the profile in order to reactivate I get the message "Cannot delete permission". I also checked the username Adobe and PW - they work on the stand-alone people computer when you import ebooks in this unit. I profile 2 on the laptop. Suggestions?

    If for some reason you cannot withdraw the authorization of ADE, follow the steps below:

    Click Start > run.

    Open, type regedit in the text box and press ENTER. The Registry Editor opens.

    In the left pane of the registry editor, find the following registry key:

    HKEY_CURRENT_USER\Software\Adobe\Adept

    Right click on the key to the follower, and then choose Remove.

    In the dialog box confirm the key deletion, click OK.

    Your permission is removed.

    ADE will be cancelled now.

    Now allow ADE new. [Help-> allows computer].

  • I was change in 'Basic' in the 'Development' of Lightroom module, but in some sort the 'Basic' program has disappeared, and I find myself with more detailed editing tools that I don't want. How to get back the menu basic edition?

    Question: I've been change in 'Basic' in the 'Development' of Lightroom module, but in some sort the 'Basic' program has disappeared, and I find myself with more detailed editing tools that I don't want. How to get back the menu basic edition?

    Hello

    Click on the window inside Lightroom go to control panel > and select Basic from there.

    Thank you

  • Develop the Module tool options: change back to the old to the new...

    Hello!

    I have a question about the develop Module in LR CC 2015 version. Sometimes I see the latest tools/options (highlights e.g., shadows, white, black), and other times the old options (exposition of exodus, recovery, fill light, black). At this point, it seems random - a set on a photo, another series on another photo of the same file type, sometimes both flip flop on same photo file...

    What is happening with this?  (Running Windows 8.1, FWIW)

    The Version of the process is carried forward from your LR catalog previous edition. Unless "update you the process version" it will remain the same. It is better to update the one-at-a-time images according to your use of the image file. If it looks good with the old version of process go forward and this continues. If an image has a problem with details of highlight or shadow, then this is a good candidate for the update to Version 2012 process. LR "will convert automatically" your settings for the new PV, which may seem very well. If this is not the case, reset the settings of your PV2012 to 0 by default by clicking on the word 'Tone' in the base Panel and repeat.

    https://helpx.Adobe.com/Lightroom/help/develop-module-options.html

    operaflute wrote:

    At this point, it seems random - a set on a photo, another series on another photo of the same type of file, as sometimes the two sets flip flop on the same file of photo...

    This is probably caused by the application a develop preset with the old version of process.

    Update the process Version in develop presets Lightroom 3 Lightroom 4 and later versions

  • The editing tool "basic" disappeared from the develop module. Ox 10/9 and LR 5.4. He was present yesterday. Please notify.

    The tool "base" has disappeared from my menu of the develop Module. He was here yesterday. Mac OX 10.9 and LR 5.4.

    Please notify.

    Thank you

    Right-click on one of the other modules, select "Expand" in the menu.

  • remove the development tools

    I have tried everything I can find online, but I just can't help the developer tools to interfere when I type in a search, or type text on a web page.

    I went to about: config and off each dev listed, still nothing changes.

    Please tell me how to remove the tools from the developer of my computer

    If Safe Mode works, which usually means that one of your extensions is the origin of the problem.

    You can try to disable the more less frequent - Garmin and AVG - on the addons page. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click Extensions. Then, you can find the button disable for each of them.

    Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

    Which improves the behavior of Firefox?

    It is also possible that the extension of the problem works great on its own, but interacts badly with a your plugins, so if you want to keep both of these extensions enabled, examine and disable unnecessary plugins.

    Page modules, in the left column, click on Plugins. To disable a plugin, change its permission to "activate" to "never activate. You may need to open a new window (Ctrl + n) or exit and restart Firefox to see the effects of the change.

  • Background color in the develop module is different than anywhere else

    I am under Lightroom 6.1.1 on Windows 7. If I switch back and forth between the magnifying glass and develop (alternating with pressure 'E' and has '), I can see the background color for the develop module is significantly different, even if it is set to medium gray in the two places. Moreover, if I press on '-' (backslash) in the develop module to compare the pictures before and after, I can see the background color changes back, which is incredibly distracting. The background color in the develop module does not match the color that is used in any other module either. I just installed Lightroom and haven't touched one of these settings, so the background color is always set to medium gray everywhere. What is going on?

    Loupe view (normal gray color):

    loupe.png

    Develop the vision (bad brownish color):

    develop.png

    Develop 'before' view (gray color good once again):

    develop-before.png

    So maybe the brownish background, you see around the image is trying to tell you the calibration of the monitor is turned off.

    Also, try to turn off the processor feature graph using and see if that helps.

  • How is there is some noise in the library module, while there is none in the develop module?

    Straight, simple like this:

    I shoot with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

    I airbrushed a picture and I pushed some limitations while using the tool brush on some sections of the image.

    As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo.

    How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

    What to trust? How can we work with divergence like that?

    If anyone noticed something similar, I would really like your opinion on this.

    > I'm shooting with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

    You have been deceived by the marketing. All cameras, even a 5DmkII a noise at each ISO setting. Most of the noise from digital in modern cameras capture is caused by photon counting statistics (i.e. photographed fish noise or noise) and in small part by the noise of the amplifier. This means that any pixel noise is practically equal to the square root of the number of photons counted by the pixel. "Canna change the laws of physics Cap ' n."

    > I've airbrushed image and I pushed some limitations while using the tool brush on some sections of the image. As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo. How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

    Development module working on a small subset of the raw data for its display, especially when zoomed out to go up or fill. This is to ensure that cursors are sensitive and you don't have to wait for a few seconds each time you touch a slider. You can only trust the preview to establish in what respect the sharpness and noise when zoomed to 1:1 or higher because of this and this means you must be able to optimize the sharpness and noise while the zoom 1:1 reduction. This is necessary in all cases that capture sharpening and noise reduction work at the pixel level. In the library, the preview is a JPEG, pronounced on the raw file using full raw. Also note that if you brush positive clarity, one tends to amplify really no noise in the image, so, be careful and check regularly at 1:1.

    > What to trust? How can we work with divergence like that?

    1:1 Preview to the point or the glimpse of the library if you are interested in the features of sharpness and noise.

    > If anyone noticed something similar, I would really like your opinion on this.

    You are not the first to see it for sure. Usually, it doesn't matter except when you push your images really hard.

  • The developer tools window is opening and closing constantly, and I don't know how I can stop this

    This window flashes constantly at the bottom of the page and I can't stop it

    Do you mean the inspector or do you mean the developer toolbar?

    The shortcut key for the Inspector is Ctrl + Shift + C, so make sure that you don't accidentally press the SHIFT key when you use Ctrl + C to copy the text to the Clipboard.

  • Panels in the develop module does not open

    All of the panels in the develop Module are visible and have a check beside them when I right-click.  However, the panels not open or close when I click on them.

    I can't seem to open the base Panel, and I can't get the detail panel to close?

    Thanks for your suggestions.  I searched for an answer in the FOrum, but did not.

    I've never seen a check mark next to a Panel, you can show us a screenshot? I saw a triangle on the right edge of the Panel name, what do you mean? (And I can confirm that it is Lightroom you speak?) If so, what version NUMBER?)

    What happens if you press CTRL + 1, the base Panel seems so?

  • Move image image in the develop module slowed down considerably in the last version of LR

    I am a user of long date LR and use a fast PC Win10 (32 GB DDR4 RAM, SSD, GT 740 video discs, CPU i7 etc.) and the last LR update (or is this the one just before it) has radically changed the speed I can go from one image to the image in the develop module.

    I read about a memory leak problem but with 32 GB DDR4 memory 2133 speed I never noticed the RAM usage (perhaps 25%?) so I don't think that is the question.  Something has changed in LR and Adobe to remedy.  The downturn is really affecting my work and I make my living in this way! Adobe, please help us!

    Try to uncheck the option preferences > performance > CPU graph use.

  • Card Intel HD 520 causes areas white/blanks in photos in the develop module of Lightroom in new X 1 carbon Gen 4

    I have a new laptop Lenovo with a CPU i7-6600U, 16 GB of RAM and an Intel 520 HD GPU, pilot 20.19.15.4380 dated 02/02/16.  I use Lightroom CC 2015.5.1.

    The GPU passes Lenovo hardware diagnostics.

    In Lightroom CC, in the develop Module, move the adjustment sliders or simply move the cursor any where often causes the image I work mainly to turn bright white or white for the most brilliant with holes.  Cursor movement or disable the adjustment panel restores photo (see examples).  Only happens when LR says to use the GPU via Edition > Preferences > performance - does not occur when this box is not checked.

    Here is an example of a RAW photo opened to develop:

    Capture1ok.JPG

    and then when I'm working on it with GPU on:

    Capture1.JPG

    If I move the slider, picture goes back to normal, although the problem may occur again with different parties going blank.

    I read LR problems with other cards, so if it is a software related issue, I can live with it--not off the GPU.  I just want to rule out the possibility that I have a faulty GPU.

    Thanks for your help

    The GPU causing the problems you see and others as you read it, if you say that you have tested and everything is fine, then just leave it unchecked option and you will be fine. There may be an update to the map in the future that can cure the problem, but in the meantime...

    Good luck, and I like the picture in the screenshot also!

  • Photo disappear in the develop module

    When I open an image in the develop module, it disappears as soon as I press the first controller.

    On the display appears: there is no image selected.

    It is since the last update. I don't know where is the flaw.

    I hope someone here can help me.

    Ute

    First of all, thanks a lot for your answers.

    When I tried to implement your ideas, I noticed that the problem apparently does occur when I select the image of a smart collection.

    When I select the image from a file, everything works as usual. I use lightroom that shortly. Without doubt, I make a mistake with the smart collection.

  • I have 6 Lightroom now but if I update to creative cloud and after a period of time you want to return to Lightroom 6 I'll be able to use the develop module in my Lightroom 6?

    Is the develop module of Lightroom 6 still available to me if I return from CC to the product I own?

    Yes but it can be a little tricky.

    LR 6 so the CC 2015 version are exactly the same. The difference is how you connect.

    Sign In with an Adobe ID a is or has been associated with the subscription and it becomes the CC 2015 version.

    Sign In with an Adobe ID that has never been associated with the subscription type and it becomes version 6. So since you have already used an e-mail address to activate the stand alone version 6 you must use a different email address, another ID Adobe buying the CC version. So if you ever want to revert to the version 6 You Sign Out with the Adobe ID email address, which IS associated with the subscription and back panel with the e-mail her IS NOT associated with the subscription.

  • Strange coloring of photos in the develop module

    My newest import, the photos looked normal in the library module. However, when I go to the develop module, something strange happens. This, to be exact:LightroomColoring.JPG

    I tried many different things to solve this problem and nothing seems to work. Anyone know what it is?

    Have you tried the rest down to the right?

    Also try to disable the GPU in the preferences

Maybe you are looking for

  • where is my firefox button?

    I don't have the button at the top of my page firefox firefox.where is he?

  • What can I do to fix my phone of brick

    What can I do to fix my phone of brick

  • problem of space... Please help me

    my c: drive shows 195 GB free of 221 GB.  but the next day it shows 185 free 221 GB third day it shows 178 Gb free of 221 Gb. so I m not to install any program. it consumes very large amount of disk space. Why? I've used disk Cleanup, disk defrangmen

  • How to configure Windows to the 850 code page?

    I need to put Windows to use code page 850, rather than any code page that it currently uses (1252). I understand that the Panel does not have an option to select the current code page, but uses rather 'local '. My locale system is configured to:Engl

  • Reduce the sensitivity of the ListView

    Hey,. I can't scroll through the items in my scrollview, these are the properties: layout: {FlowListLayout} direction: LayoutOrientation.LeftToRight } snapMode: SnapMode.LeadingEdge scrollIndicatorMode: ScrollIndicatorMode.ProportionalBar touchPropag