Comparison of several

Hi all

I have 3 digital input variables. I need to check the weather, the individual variables is within a particular range. After getting confirmation or not of the 3 variables, depending on the condition that results will display a special message. There are at least 6 different cases and display messages.

Please help me with a way to go in this.

I can deal i structure with all outputs in it to display for different cases... but how can I give the case selector then?

Thank you!!

6hari9 wrote:

but the range also changes. I'll have to use more than one 'Beach '. then for the structure of the case allows to display different messages, the entry for different cases will come from more than one "in the range"... or I'll have to use several case pickers

Why? If feed you a table of three elements and using arrays of three elements for the lower and upper limits, you should be all set. Comparisons will be piece-by-piece. You get a Boolean outside table, one for each af comparison the three.

If three values are scalar, built first in a table.

Tags: NI Software

Similar Questions

  • PSC 1610 all-in-one several error messages

    Hi and thank you for providing this service.  I have a PSC 1610 all-in-one, bought in August 2005 which is used with a Compaq Presario Windows XP (they were purchased as a Pack).  I started to receive error messages, more which start with 0 x, I have determined is an ink system failure.  Sometimes the messages sometimes say 'failed to initialize' or 'hw_interrupt '. At this point, I can use the power button on the 1610 and it restarts, sometimes producing a print.  Other times he repeats just with a different error message.

    I've uninstalled and reinstalled the software from the original CD, and also did the instructions on here regarding unplug USB cable, power unit, waiting, etc.  but unfortunately, I'm still having the same problems.

    I guess my questions are 1) is there anything else I can try to solve the problem and get back to happily print my genealgical research and/or 2) because the machine obviously lack of professional maintenance and it's so old, I would be better off just buying a new all-in-one?  (New Anthing I would buy would have both with this older Presario and a laptop HP 3 year running Windows Vista).

    HI -.

    I'm guessing you've already gone through the steps described in this document?  If so, on the only option I know is him having served.  In answer to your other question, with the price of all-in-one now, it is probably a better option to just buy a new one.  You can find the plug on current on this site printers.  You can do some comparisons between several printers to see what OSs are supported.  Wish I had better news.

    Hope that helps.

  • Windows DVDMaker did not audio product!

    I have a movie that is made up of 5 segments - each segment is a file MPG about 1 GB (32 minutes), with the last one about 370 MB (22 minutes).  Alone, these 5 files will play perfectly on my PC using Windows media player - or any other player (I have other 3: PowerDVD, CyberDVD, and?).  No problems.

    I then ran Windows DVD Maker to create a DVD disc of film-like that I can give to someone and play on a standard DVD player connected to a TV.  I dragged the 5 files sequentially in the creation of Windows DVD window, changed the title game, Notes, Slow speed, unchecked the AVI filter option and inserted a blank disc DVD + R (4.7 GB) standard in my DVD drive to burn DVD burning.

    The fire proceeded without errors, and the DVD resulting is perfect in all aspects of the video when I played it on a dDVD player connected to a TV.  But only the first segment (the first of the 5 MPG files) had audio.  When the film continues automatically play the next in the sequence segment, the video came out fine and perfect, but all audio data was gone.

    I took a quick look inside the temporary folder (... \Transcodes\...) that Windows DVD maker used to make transcoding - and verified that indeed than the first MPG file/folder was created _AC3 (for audio) file.  The 4 other MPG files/folders didn't.

    WHY Windows DVD Maker do this?  Tips, advice or direct solutions/explanations would be very appreciated.

    Thanking you in advance,

    PS - I am running Windows 7 Home Premium Edition (64-bit) with SP1 and all the latest Windows updates (18-Sep-2013)

    I have a movie that is made up of 5 segments - each segment is a file MPG about 1 GB (32 minutes), with the last one about 370 MB (22 minutes).  Alone, these 5 files will play perfectly on my PC using Windows media player - or any other player (I have other 3: PowerDVD, CyberDVD, and?).  No problems.

    I then ran Windows DVD Maker to create a DVD disc of film-like that I can give to someone and play on a standard DVD player connected to a TV.  I dragged the 5 files sequentially in the creation of Windows DVD window, changed the title game, Notes, Slow speed, unchecked the AVI filter option and inserted a blank disc DVD + R (4.7 GB) standard in my DVD drive to burn DVD burning.

    The fire proceeded without errors, and the DVD resulting is perfect in all aspects of the video when I played it on a dDVD player connected to a TV.  But only the first segment (the first of the 5 MPG files) had audio.  When the film continues automatically play the next in the sequence segment, the video came out fine and perfect, but all audio data was gone.

    I took a quick look inside the temporary folder (... \Transcodes\...) that Windows DVD maker used to make transcoding - and verified that indeed than the first MPG file/folder was created _AC3 (for audio) file.  The 4 other MPG files/folders didn't.

    WHY Windows DVD Maker do this?  Tips, advice or direct solutions/explanations would be very appreciated.

    Thanking you in advance,

    PS - I am running Windows 7 Home Premium Edition (64-bit) with SP1 and all the latest Windows updates (18-Sep-2013)

    ======================================================
    Were all the. MPG from the same source files.

    Of the. MPG files been edited in some way?

    You mentioned AVI filters... you try to uncheck all filters?

    It may be worth trying to convert MPG files to the. WMV
    format before importing in creation of DVD.

    As an alternative, the following software may be worth a visit:

    (the simplest method can be Freemake Video Converter...
    find info included at the end of this message)

    The following article offers comparisons of several retail
    Creation of DVD programs.

    2013 DVD comparative Authoring of software products
    http://DVD-authoring-software-review.TopTenReviews.com/

    And... the freeware DVDStyler might be worth a try.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    DVDStyler is a cross-platform
    DVD authoring free application
    http://www.dvdstyler.org/en/
    (* Read * all * the installation screens... it)
    may be a few items you want to unmark *)
    (name of the file to download: "DVDStyler - 2.4.3 - win32.exe")

    DVDStyler FAQ
    http://sourceforge.NET/apps/MediaWiki/dvdstyler/index.php?title=FAQ

    Guide to DVDStyler
    http://www.dvdstyler.org/en/documents?ID=70

    DVDStyler. Manual in PDF format
    http://dvdstyler.sourceforge.NET/docs/DVDStylerManual.PDF

    DVDStyler Forum
    http://sourceforge.NET/p/dvdstyler/discussion/318795

    Another option would be to Freemake Video Converter:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Freemake Free Video Converter (freeware)
    http://www.Freemake.com/free_video_converter/
    (Windows XP / Vista / 7 / 8)
    (* Read * all * the installation screens... it)
    may be a few items you want to unmark *)

    Freemake free Video Converter - how to burn video DVDs
    http://www.Freemake.com/how_to/how_to_burn_dvd_video

  • "Watch the folder Service unavailable" PSE 7

    I'm having intermittent problems in PSE 7 I don't remember having in PSE 4. In a typical capture and edit the workload, I supported the photos from my camera using the function 'Acquire' PSE 7. I select those I'll keep and edit then save in "My pictures" as a TIFF file. For those that I want to put in place on the net, I keep editing to add a text of author then 'Save for Web' using a separate folder in "my pictures. Most of the time, that works very well. Sometimes, the file is apparently not added to the catalog. It is there physically but is invisible in the catalog.

    I tried to go to the file - spyware file and get a message "Watch folder not available." Is this a known problem and is at - it solution or one wor-around?

    If it's important, I'm still on Windows XP Media Center and maintain all of the updates.

    Y at - it a method to 'Acquire' or in another device that would allow me to have the Organizer identify and add existing pictures in my files that are not in the catalog without a manual comparison of several thousand pictures?

    If you file > get Photos and videos > files and folders and select a folder, PSE will only import the photos that are not already in your catalog.

    You can also use file > get Photos and videos > by searching for searching for files containing the photos is not-yet-imported. This will give you a little more control over the selection to set records.

  • Comparison of the data of several rows in a table - based on the primary key

    Currently I have a select statement that returns hundreds of records.  Each returned record is linked to A NUMBER of ORDER this order number has a recipe.  (a bit like a cooking recipe).  Each recipe has many records in the database related to this order number and records should be compared to records in a table that bind to a specific primary key...  (I have already developed the logic to isolate what PK I need).  If all these records that are returned by the select statement below does not match all the records containing PK in the table below, I need to get the next PK and compare all these recordings for select statements return.

    See below for a better understanding. Need a good example detailed on how to solve my problem here.

    Just to help you understand:

    Each element of the recipe is 3 parts (side, ref_des, part_number).  1 single recipe can have several parts (where the part_number), and each of these pieces should be placed on the lower side or top of the Board that is there "side" comes into play.  Same thing with Ref_Des.

    What is going on

    Select statement returns the RECIPE of ORDER NUMBER A.  There will be multiple records returned by this query.

    Select the Return statement:

    • Side
    • Ref_Des
    • Part_Number

    Example of return:

    B c17 75145-2

    T f14 89242-8

    B s12 45123-3

    etc,

    In general - what I need to do:

    There is a table called AUTO_RECIPE_DETAILS.  I take all of the records returned by the select query above and compare for each record in this table relating to the recipe 30319-000001.  30319-000001 a number of records.  It is the primary key for a whole recipe as seen above.  This primary key is bound the number of data records in this table.  The comparison is to see if all records under RECIPE_NAME 30319 -000001 match all the records returned by the select statement.

    IF IT DOES NOT MATCH: recover the following recipe in this table below 30319 -000002 and make the same comparison.

    Here's a perfect example of what the table looks like: (AUTO_RECIPE_DETAILS)


    RECIPE_NAME SIDE REF_DES PART_NUM

    -30319-000001 C16 87595-1 B

    -30319-000002           T B14 74150-4

    -30319-000001 T B14 34251-2          

    -30319-000001            T F24 84180-7

    -30319-000002 T B12 13710-8          



    It is the solution to my original question.  By this thread, it's the right answer and I hope this helps someone who is trying to compare two arrays element-by-element.  In the end, the advice given in this thread were correct and I will be using all of your suggestions and the scrapping of this.  Thank you everyone for your help though.

    FOR index_p IN pid_recipe. FIRST... pid_recipe. LAST

    LOOP

    Result WHEN the OUTPUT = 1;

    FOR index_d IN details_recipe. FIRST... details_recipe. LAST

    LOOP

    IF (pid_recipe (index_p). SIDE = details_recipe (index_d). SIDE)

    AND (pid_recipe (index_p). REF_DES = details_recipe (index_d). REF_DES)

    AND (pid_recipe (index_p). PART_NUM = details_recipe (index_d). PART_NUM)

    THEN

    EXIT;

    ON THE OTHER

    DBMS_OUTPUT. Put_line("IT WAS NOT a MATCH");

    result: = 1;

    EXIT;

    END IF;

    END LOOP;

    END LOOP;

    DBMS_OUTPUT. Put_line('LOOP OUT');

  • Find entries with several conditions, including the comparison

    Hello

    I take the edition of I v6.2.7 a ride, I'm looking at the use case is the following. I have a "table" with about 100 k records defined by this object:

    @Entity
    public class LTROW {
    
      @PrimaryKey
        private Integer id = null;
    
        @SecondaryKey(relate=Relationship.MANY_TO_ONE)
        private Integer tableId = null;
        
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col0 = null;
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
        private String col1 = null;
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
        private String col2 = null;
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
        private String col3 = null;
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
        private String col4 = null;
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
        private String col5 = null;
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
        private String col6 = null;
        @SecondaryKey(relate = Relationship.MANY_TO_ONE)
        private String col7 = null;
        
        private String result0 = null;
        private String result1 = null;
        private String result2 = null;
        private String result3 = null;
        private String result4 = null;
    // ...
    }
    

    Typical research I must apply is: give me all the entries contained in tableId X where the value of co0 is equal to 7, 1112 exceeds the value of col1 and col2 value is less than 8.

    I got in the definition of index for all columns defined in the class, but can't seem to understand how to combine these criteria. I looked at EntityJoin but it doesn't seem to be what I'm looking for.

    Thank you!

    You cannot use multiple indexes for this kind of query. Instead, create and use a single index for one of the conditions and filter on other conditions. I hear, by 'filter' select the records you want using an 'if' statement Try to choose the index that returns the smallest number of records.

    See:

    http://www.Oracle.com/technetwork/database/database-technologies/BerkeleyDB/performing.PDF

    -mark

  • How can I update several lines based on the comparison of the fields table 1 and 2

    I create the following SQL to test what I found a method to update the records where the fields below the game, but what ends up happening is that the update functions works the first time and then basically updates everything to null. I don't understand what I'm doing wrong. New to this.

    UPDATE SLS_HDR B
    DEFINE (B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS,
    B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B,
    B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB,
    B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT, B.UPDATED_DT)
    (SELECT =
    A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS,
    A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B,
    A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2, A.PLAN_DEL_DT, A.TXTA, A.TXTB,
    A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT, A.PAY_CONTACT, A.ORD_AMT, SYSDATE
    Of
    SLS_HDR_TEMP HAS
    WHERE
    A.FIN_COMP = B.FIN_COMP AND
    A.LOG_COMP = B.LOG_COMP AND
    A.ORD_NO = B.ORD_NO AND
    A.TRANS_DT = B.TRANS_DT AND
    A.BP_TYPE = B.BP_TYPE AND
    A.STATUS <>B.STATUS);

    Can someone advise?
    Thank you

    Published by: 903292 on December 19, 2011 13:15

    you don't have a where clause in your update so no-matched lines will be updated with null values

    UPDATE SLS_HDR B
    SET ( B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS,
    B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B,
    B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB,
    B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT,B.UPDATED_DT )
    = (
              SELECT
              A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS,
              A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B,
              A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2,A.PLAN_DEL_DT, A.TXTA, A.TXTB,
              A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT,A.PAY_CONTACT, A.ORD_AMT, SYSDATE
              FROM
              SLS_HDR_TEMP A
              WHERE
              A.FIN_COMP = B.FIN_COMP AND
              A.LOG_COMP = B.LOG_COMP AND
              A.ORD_NO = B.ORD_NO AND
              A.TRANS_DT = B.TRANS_DT AND
              A.BP_TYPE = B.BP_TYPE AND
              A.STATUS= B.STATUS
         )
    WHERE EXISTS
    (
         select null from SLS_HDR_TEMP A
         WHERE
         A.FIN_COMP = B.FIN_COMP AND
         A.LOG_COMP = B.LOG_COMP AND
         A.ORD_NO = B.ORD_NO AND
         A.TRANS_DT = B.TRANS_DT AND
         A.BP_TYPE = B.BP_TYPE AND
         A.STATUS= B.STATUS
    )
    

    OR using Merge

    Merge into SLS_HDR B
    using SLS_HDR_TEMP A
    on (A.FIN_COMP = B.FIN_COMP AND
    A.LOG_COMP = B.LOG_COMP AND
    A.ORD_NO = B.ORD_NO AND
    A.TRANS_DT = B.TRANS_DT AND
    A.BP_TYPE = B.BP_TYPE AND
    A.STATUS= B.STATUS)
    when matched then update set (B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS,
    B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B,
    B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB,
    B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT,B.UPDATED_DT ) = (A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS,
    A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B,
    A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2,A.PLAN_DEL_DT, A.TXTA, A.TXTB,
    A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT,A.PAY_CONTACT, A.ORD_AMT, SYSDATE)
    

    HTH...

    Thank you

  • Firefox (windows XPsp3 39.0.3) does not load a product comparison, IE will!

    I tried one compare products on the website batterychargers.com and load Web site pages, I've tried except when I selected items and you click on compare, I got the title of the page, but with an empty window to compare. I copied the URL in IE8 and loaded the page to comparison very well. Here's the url:

    http://batterychargers.com//compare/1288/1290/1291/1326

    Clear cookies and cache did not help.

    When I loaded this page, all content under the word 'RETURN' was pressed to the right, and I have to use the horizontal scroll bar to see. Or zoom out (Ctrl-) several times to reduce it.

    The reason for this problem, because as far as I can tell, is that the BACK bar is launched, and while other browsers do not see a way to squeeze the comparative table in the end of this bar, Firefox works. There are different ways to solve this problem in Firefox for the author of the page, but they are not practical for visitors to the site. So for now, using the horizontal scroll bar is the best workaround.

    But if you're curious...

    For example, the site may add this to its style rules:

    .ComparisonTable {
        clear: left;
    }
    

    If you want to inject that into the page to test, you could do this:

    Select and copy the following script:

    document.querySelector(".ComparisonTable").style.clear="left";

    Open the web console under the page by pressing Ctrl + Shift + k or by using the menu Developer.

    Paste the script into the bottom beside the circumflex accent (> >) and press ENTER to run it. The comparison table should immediately engage.

    You can then close the web console by pressing Ctrl + Shift + i or by clicking the small x in the upper right of the console toolbar.

    Unfortunately, this is a one-off hack and you should do whenever you view a comparison, so I hope that the site will fix it. You could try to mention it to them; You can link to this discussion.

  • Multiple comparisons on a single Data Source: NaN vs large number

    Hi all

    Work in 2013 of TestStand and came across a situation by measures of DMM, in which several values would be acceptable for the comparison of the limit.  For example, if I make a measure of resistance, and I expect to be a very high value, for example more than 1 M, I would insert that as the lower limit.  However, there are also situations when I could see the result of "NaN" on the meter.  For the purposes of the test, any number greater than 1 M would be acceptable, but a result of NaN would also be acceptable.  In an effort to keep the modular code and reusable for many cases, I'm curious to know if there is a way in TestStand to compare the result of the test against two values at the same time, (i.e. > 1 M OR = NaN).  Please notify.  Thank you.

    GSinMN

    put this in your low limit:

    Step.Result.Numeric is NAN? NAN: 1000000

    Hope this helps,

  • How to get several beep?

    Hello

    I want to get several beeps output if a comparison condition gives output as true.

    Can someone tell me how to get several beep?

    Put the beep function in a loop with a small wait for the statement.

  • Several waveforms in a simple graph

    Hello

    I need to compare several waveforms (max 10) in a simple graph shape wave. Few of the waveforms are taken directly from Tektronix 11801 B sampling oscilloscope and bit the previously recorded data come from or may sometimes come from the oscilloscope itself... I did it for the two waveforms and it works perfectly... I just wanted to know if I should get all the waveforms of the instrumetn directly for comparison, do I have to repeat the same procedure for 10 times or y at - it another way to do it?... I'm fairly new to labview... could someone help me please

    Joined the vi that I did for 2 waveforms

    Concerning

    Julien

    Hi Alain,

    an example, as requested:

  • Output system are made up of several conditions by using the If Condition

    Hello master. I want to create a system of products composed of several conditions using if conditions. The input of the system is derived from "counting" and the second entry is "O". Entry is in order. Then, the expected results are:

    If Y<= 5="" and="" count=""><= 20,="" the="" result="" is="">
    If Y<= 5="" and="" 20=""><30 result="">
    If Y = outcome 30 C <= 5="" and="" count="">

    If <= 5="" y="">= 10 and County<= 20,="" the="" result="" is="">
    If <= 5="" y="">= 10 and 20<30 result="">
    If <= 5="" y="">= 10 and County > = result 30 C

    Thank you for your attention.

    Kind regards

    Fajar

    Assuming that 'A', 'B' and 'C' are digital issued by a calculation, you can use a node of the formula.

    Here is a small example based on your rating (a bit confusing).  It can be slightly changed, but it might be a starting point (assuming I understood you, and you're only dealing with the numeric data types simple as described in your example).

    The case could just to do this using regular functions of comparison of LabVIEW and data flow.

  • Several numerical limit hide the exits "Unused" in the test report

    Hello

    I have a question about several limit test digital and output report in ascii txt format:

    Example of a measure, that's what I see in the txt file:

    Measure [74]:
    Limits:
    Low: 4.75
    Top: 5.25
    LowExpr: "
    HighExpr: "
    Units: V
    Comparison type: FROZEN (> =)<>
    CompExpr: "
    UseCompExpr: false
    Data: 5
    Status: passed

    Is there anyway I can hide or "understand" the unused portion of the output?  In this case I have LowExpr, HighExpr, CompExpr and UseCompExpr.  It will be cleaner and easier to navigate... basically this report:

    Measure [74]:
    Limits:
    Low: 4.75
    Top: 5.25
    Units: V
    Comparison type: FROZEN (> =)<>
    Data: 5
    Status: passed

    Kind regards

    Mike

    You're probably missing an indicator which is supposed to be there for some properties (i.e. PropFlags_DontCopyToResults). I don't see enough detail in your screen to see why this is happening, but if you enlarge the column in the middle or mailed this that all expressions are you using, I might be able to see what is happening. You can manually / programmatically readd this indicator for some properties, but it should really be configured by default on the expr properties already so I don't know why it isn't in your use case. The steptype sets the flag when running on the LowLimit and HighLimit are used as necessary for the case in which only one or no limit. It is generally expected the flag already set the other properties in need at the time of publishing.

    You can view the source code at:

    TestStand\Components\StepTypes\CommonSubsteps\

    to see how the type of step limit multinumeric sets the flag.

    Hope this helps,

    -Doug

  • How to raise an event (in the structure of the event) comparison function output

    Hello

    I want to triger specific event from a structure of event with the release of the comparison function. I tried several times but the output of the comparison function is not triggered. Please, propose solutions.

    Kind regards

    Mlad

    If you want to use a structure of the event, you must react on the digital inputs, for example as follows:

    Notice that the VI is inactive unless a change control (x, y, stop), date on which Boolean values are updated, comparison made, his played if necessary, and VI stopped if you press stop.

  • Save several bays of nested loops

    Hello

    My vi generates several bays in each iteration of the loop, and I would like to save the data. I did work with the files before recording, but it's never with nested loops. I don't know how to keep the information of the iteration of one loop at the other. I would like suggestions. I made this sample & simple vi (attached file) that simulates the question I have. I have a file with a time column and different columns of food beside him.

    The first question I have is that I generate the time table only once, but a table of signal several times, so how can I keep the time table to drop several times? The other question, as stated above, saves the data in the table signal getting lost in the nested loops...

    Thank you

    A

    1. the first element of the first matrix signal IS always zero.  The Signal to simulate always starts at zero.  You compare it to the indicator of "first date".  Who got by converting the dynamic data type to a scalar.  And it's always the last element of the actual data.  And since the "first out" is replaced with each iteration of the inner loop, the number you see at the end is actually the latest iteration of the data.  Look at "First release" in comparison with the last element of your last column of the table and you will see they are the same.

    2. the reason why you have a first column that consists of the steps is because that's what you have wired to initialize the shift register.  If you look at my example, you will see that I have an empty array.  (The zero is gray.)  You, the 0 is not dimmed meaning there is an element.  Expand this table to view more items and expand the digital field and you will see more digits.  They correspond to what is in your first column.

Maybe you are looking for