Similar Questions

• How to close a pop-up open running in the new thread in Teststand without manual intervention?

  Hello

  I'm keycycle in infinite while loop. There are two ways to break out of the loop

  1. click on the 'OK' button on the pop-up that says "complete the event. The pop up is running in a new thread.

  2 increase the value of the parameter "Reset_Count".

  If I choose the first way the sequence runs completely, but if I choose the second way then execution gets stuck in cleaning and waiting for me to click on the button 'OK' Popup.

  So my question is, is there any way by which I can close the popup without manual intervention?

  I have attached the seq, in case you want to see exactly what is happening.

  Thank you

  Hello.

  Yes, replace the TestStand popup a dialog box with custom of LabVIEW.  Here are my first thoughts on a simple method...

  a.) replace the TS popup with a LabVIEW dialog box.  The LabVIEW dialog box contains an OK button and a loop waiting for an LV notifier.  Simply wait for the notifier of LV (with a timeout of 100 ms) as well as the OK.button.

  Then when you get your external reset to end the test, create an another VI to SET the alert (with data as a Boolean value) system to stop the dialog box.

  Let me know if this can work.  I could put something togther for example, if any.

  Thank you
  PH

• When you try to create the new thread in a discussion forum, the browser closes and I'm back in the office.

  I tried to create a new thread in a Discussion forum.  Closing the browser window and I was back on the desktop.  I did a system restore, which not only does not solve the problem, but deleted my internet security software.  Has worked with people of tendency to reinstall the software, but I get a message tht says: «Unable to extract the installer...» ».  I have a class of the internet this week and I need this computer.  Can someone please?

  You can undo the last restoration of the system using: http://www.vistax64.com/tutorials/76256-system-restore-undo.html.  This may fix your problem with security software that has uninstalled when you did the system restore (using a date that probably existed before the installation of trend).  I don't know if it works now that you have done other things to try to reinstate the program, but it's worth a try.  I sincerely doubt that this process could help with the problem of browser (and there not so undo it reverses your efforts).

  You use Internet Explorer?  If so, please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the IE specialists will be more than happy to help you with your problem.

  If you are using another brand of browser, please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where experts in programs other than Vista or IE will be more than happy to help you with your problem.  You can also try to go to the web site of the Explorer and contacting their technical support staff (or post on a forum if they support a).

  Only trend can help you with installation problems you encounter through their program.  Perhaps it didn't uninstall completely during the restoration of the system.  Check if the trend has a removal tool and use it to uninstall the program, then try to re - install again.  If this does not work, you will need to work with their technical support to solve the problem.

  I hope this helps.

  Good luck. Lorien - a - MCSE/MCSA/network + / A +.

• Set title for the new thread

  Hi guys,.

  I have created a new thread, but do not know how setTitle for her, this is my code:

  public class MyThread extends Thread
      {
  
          String htmlString = "
  ABG
  Definition
  ";
          public MyThread()
          {
  
          }
          public void run()
          {
              try
              {
  
                  ByteArrayOutputStream output = new ByteArrayOutputStream();
                  Base64OutputStream boutput = new Base64OutputStream( output );
  
                  output.write( "data:text/html;base64,".getBytes() );
                  boutput.write( htmlString.getBytes() );
                  boutput.flush();
                  boutput.close();
                  output.flush();
                  output.close();
  
                  BrowserSession bSession = Browser.getDefaultSession();
                  bSession.displayPage( output.toString() );              
  
              }
              catch( Exception e )
              {
                  System.out.println( "Exception: " + e );
              }
          }
      }
  

  and this is my screen when starting the new thread:

  

  

  Threads have titles.

  If you are referring to your HTML content, why don't use you the title tag and see what happens?

• can I erase all the data from my old phone with out damaging the data on my new phone?

  My old phone is disconnected from my iCloud, I want to know that the data on my new phone will not erase?

  Provided that you (a) save it to the top and (b) have signed, Yes.

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• Error in the new thread should terminate execution

  Hello

  I have a labview VI (continuous while loop), getting initialized in the subsequence of Initialize section of the main sequence and running in the new thread. An error in the execution of this loop will stop execution of VI, pass the error to Teststand and out the thread. I need to put an end to the execution of the main sequence, when the error event in the new thread (passing initialization). Is it possible to do? I'm getting the popup of error Standard Teststand, when the error event, but when I choose to cancel/Abort, the execution of the main sequence doesn't stop and continues. What is the right way to handle errors for threads running in parallel?

  Thank you best regards &,.

  Juvin Ronny

  Some approaches.

  1) wait on the new thread periodically with a wait with a timeout step zero and "timeout causes error" box unchecked. If the thread is finished and has an error, the step of waiting spread the main thread of the error.

  (2) call the Execution.Terminate () or Execution.Abort () of cleaning up your sequence newthread.

  Hope this helps,

  -Doug

• Step failed in New Thread does not display in the report

  Hello

  I call a sequence of sub in a 'new topic '.  A step inside this sequence of subroutine fails.

  The end result is the Test failed because it is supposed to be, but the step failed does not show.  (I show not only failed in the report).

  Can it be fixed?

  Thank you

  Rafi

  It is correct. If you look at the entry Point of the execution of the process template, you'll notice that once completed execution of the main sequence, the generation of reports and other things start.

  If spawn you a sequence in the new thread from the main sequence, MainSequence could finish before the subsequence ends its execution and the results of the sous-suite propagate to MainSequence. So as Ray mentioned, you can force the MainSequence expect the subsequence full run using a queue time.

  See attached screenshot and/or example:

  

• Problems during execution of a LabVIEW VI in a new thread under TestStand sequence and execution of the MainSequence in step by step mode

  Hello

  We want to run a VI in LabVIEW (LV2011) at the same time to the execution of a sequence of test of TestStand (TS2010). The VI should view the condition of the equipment, while the test sequence is written in TestStand. It would be a nice feature of debugging the TestStand sequence while watching the State of the material in the LabVIEW Panel, too.

  This is where it's our problem. Imagine that you have a MainSequence calling a subsequence in a new thread, which runs the LabVIEW VI. After the call, the MainSequence continues its progression, as it is configured to do this. But if we want to execute the MainSequence in step parallel execution of VI mode, we can do that. The controls for "Step Out" etc. are grey.

  I tried to build a very simple example to explain what I mean. It's just a sequence and a LabVIEW VI, no real functionality, just take as an example for our problem.

  Any tips? What we're doing wrong? Is there something that needs to be changed in the LabVIEW VI?

  Best regards

  Manual

  You should use the monitor of the termination and the ExternallySuspended APIs for the EIS to running asynchronously. There are screws of wrapper around these APIs in the LabVIEW TestStand palette.

  For more details see using the API for the following:

  Thread.ExternallySuspended

  Execution.InitTerminationMonitor

  Execution.GetTerminationMonitorStatus

  Unless I am struggling to understand what you're asking, if you are using these APIs, you should be able to make it work as you are eager to do things.

  -Doug

• Start a new Thread in the activate() method

  Hello

  When my application is started or resumed after a phone call etc... I would like to perform some tasks in the activate() method. First of all, I would like to start a new Thread to call web services a bit, and when it's done, I would like to update the user interface.

  I tried to do. I created a new class that extends the Thread in the run() method, I placed all the relevant web service calling and code in the method activate() my main thread that I have done:

  MyThread myThread = new MyThread();

  myThread.start ();

  But I noticed that nothing seems to be done. So I simplified my code by removing all web service of the run() method calls and replaced by a wait method (500), followed by a method call to update the user interface (in this case it creates just a new ButtonField, just for testing purposes).

  But ButtonField never gets created.

  The new thread doesn't seem to be from all.

  Any suggestions?

  Thank you very much.

  Have you tried setting stop and monitoring of execution points using println?

  First of all, is called same activate()?

  Secondly, run() is reached?

  When the thread does the work of the user interface, if you have that in a synchronized block try block invokeLater rather.

• I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to ac

  I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to access Adobe.

  Strangely the same problem occurs when I try to install and older version of Lightroom 4.

  Can you help me?

  Hello

  It is the OS, not Flash drive, to ask for the password.  Please refer to the FAQ what userid & password I need to install Flash Player? for assistance.

  --

  Maria

• "Start new Thread" is absent most of the time

  I'm not new to Dell Community, however, I post here in desperation of shear.

  I consider myself a person of intelligence average and the average Visual acuity.  I did not understand why sometimes I see the link "Start new Thread" and at other times, I would not.  I thought that there are a few steps to find what I didn't know.  I thought maybe the few times wherever I found it, it was by an unknown action, that I had taken.

  This morning I wanted to see a poster of beginner in another forum of the community on this community forum.  I tried looking for information before giving it to the other poster.  I have spent the last hour looking for this and other tips from the top downwards, for the link to start a new Thread.  I even read the how-to Post wikii and came out of the magnifying glass.  I couldn't find these 3 words!

  Then suddenly, after looking the other boards and back here, these 3 words were in plain view.  It's the durnest thing I've ever seen.  Sometimes the link is visible and sometimes it isn't!  What can I do for a beginner to this community when I have used Dell forums for 2 years, is having difficulty posting?

  What is someone having the same problem?  Whatever the issue, I will be very happy when it is fixed, it is very frustrating and time consuming!

  Thank you.

  
  

• Prefer to get new threads to a new e-mail message in the Inbox

  My Inbox now displays an old Email previously sent with wires to listed. However, I don't see a new thread as a new separate Email as before, but only as a nother wire. He is easy to ignore these new messages. I'd rather get a new message, even if it's a wire, appear in my Inbox as a new message

  View (alt + V) menu > sort by > non threaded

• Comparison of the results of the performance and the sum of the sum of array elements

  I did a comparison of the performance of "Add table" with 2 other methods (an Add elements and function of ddot BLAS) to see who was the fastest and also to compare their results, given that I was watching a few slight differences.

  Conclusions
  BLAS ddot's quicker (just a little), then add items, then add it in a loop of table

  BLAS ddot and add items table give identical results almost all the time.

  I don't know why add items in a loop manually gives a slightly different result. I understand there are any rounding due to finite precision errors, but why is it different for the 2 other methods?

  This classic of digital computing: the quality of the result depends on the order of operations.

  A simple example is the calculation of a * b / c with a, b, c equal to 25, 200 and 100 respectively. The result should be 50, but if a, b and c are U8, the result depends on the order of operation, as shown in the example below. DBL and data non-entier, the difference is of course that much smaller, but still there are!

  

  

  In your case, the difference also stems from the order of operations:

  -in the table add-in, the product of all the elements is calculated first and then the elements of the array are added.

  -in the loop, the addition is performed after each multiplication.