Compatibility issue on Satellite Pro A60-129 and USB 2.0 Port Replicator II

Similar Questions

• Satellite Pro A60 PL: message: USB device can run faster

  Hello!

  I have a problem with the USB 2.0 drivers in my Satellite Pro A60 PL. everytime when I connect the message apear theres USB 2.0 device this device can run faster. What can I do about it?

  Hi guys

  I received the same message. It s not an error but a balloon tip Windows.
  I didn't find the reason for this message because my phone supports USB 2.0 ports too and I also connected a USB 2.0 compatible device.

  I've tired to remove the Device Manager, the controllers and the USB hubs and updated the Win XP operating system to the last State. I've also updated the driver chipset but sometimes (not always) this message again using a disc HARD 2.5 USB.

  I read in some professional computer magazines that this message is normal and it might appears with some SATA external USB hard drives. So you can ignore it.
  It s nothing serious.

  Greetings

• Satellite Pro 4200 series and USB 2

  Is it possible to have a USB 2 using the PCMCIA port?

  Hello

  I put t not see why it should not be possible to issue.

• Satellite Pro A60: Screen does not

  I used my Satellite Pro A60 yesterday and everything was fine, I tried to use it today and the screen lights it is just white... Please can someone help I am lost without her, the blue light comes on, but nothing on the screen please help.

  [Edited by: admin on 3 July 05 13:22]

  Hello

  you see the Toshiba logo red when it starts or a screen empty?
  Toshiba logo: so you have a software failure, and you should backup your data and do a restore
  White screen: while there must be a problem with your hardware! Contact a Service partner and he will repair under warranty!

  Good bye

• ATI error and no windows - Satellite Pro A60

  Hello

  When I start my computer, I get a blue error screen c0000415
  A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

  "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

  Oh the fun.

  "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

  I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

  Any suggestions much appreciated - thanks in advance...

  [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

  Hello

  As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
  The installation of SP2 should help.

  This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

  You should try to get an original CD of Windows XP with or without SP2.
  The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

  Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob

• Satellite Pro A60-832: sometimes the OS starts without sound and modem

  Hello

  I have a problem with my Satellite Pro A60-832. Everything works perfectly, but sometimes my system starts without sound. When this happends, modem also does not work. After reboot, everything works well again. I integrate Windows XP Pro SP2, but the same thing was happening with the original Windows XP Pro SP1 provided in the Toshiba Recovery CD.
  Any ideas?

  Sorry for my bad English.

  As mentioned, a high temperature might be responsible for these drop-outs, but I n t think that there is a problem in your case.
  I think that the temperature cannot be very high immediately after the start of the laptop.

  In case I would recommend comparing the BIOS installed on the unit you with available on the Toshiba page BIOS.
  If there is a new version of the BIOS so you can try to update.
  But be sure you use the good BIOS and the proper procedure.

• During BIOS update by Satellite Pro A60 went down and did not start

  Hi all

  I have a Satellite Pro A60 and I've updated the bios. To halfway the update, my laptop came down and started Hasna´t since. It only give a couple of beeps (trying to tell me the bios is damaged, I guess) and turns off again.

  Tried to start with (~) key pressed (a tip I received from a friend), but without success.

  I live in a country where there is no available Toshiba dealer and I rather not ship the laptop for repair.

  Does anyone know how to fix this? Any help would be greatly appreciated.

  Thank you

  This doesn't sound good.
  If during the POST, the BIOS detects a problem, it will normally display an error message visual on the monitor explaining what the problem is. However, if a problem is detected before it initializes BIOS video card or a video card is not present or not detected then BIOS will play through the Speaker beeps to let you know there is a problem.
  Depending on the type of BIOS you have the BIOS can play beeps in a specific pattern to indicate what the problem is, or emits the signal even a few times indicating the problem.

  In your case, it is possible to s you used a bad BIOS or bad BIOS procedure. Both can damage the motherboard.
  To avoid such damage and mistakes, Toshiba published FAQ document.
  How to upgrade the BIOS on most of the units!

  That you should read before making updates to the BIOS!
  Unfortunately, I n t think that you can fix yourself. I think you should ask to help ASP.

• Satellite Pro A60 does not illuminate

  When I try to boot my Toshiba Satellite Pro A60, seems to be powered. A few seconds later, there is a click and it cuts.

  I tried to turn on the computer with just the power supply with the battery removed, just with no power supply and battery and power, but none of these options are making a difference.

  I also tried to clean the fan in the aspirant from the outside by a suction pipe, but even once, it did not help.
  Can help you with the Please this problem?
  Thank you.

  Hello

  Turn the laptop over and unscrew the cover on the ram. Then remove the ram and try to turn it on again. If it lights, put the piston inside the laptop and try again. It does not turn on? Then your ram is dead. If yes then you can replace, or have your asp replace it. If this does not resolve the problem, there is a small plastic cover that runs along the keyboard just above the keyboard. Take this off and then unscrew the fixing screws to the bottom of the keyboard. Under the keyboard, you may have a second RAM slot. If Yes, try to remove the RAM stick and turn. It work? If this isn't the case, you probably have a problem with the motherboard. If it lights fine, then you have found the issue and can replace or continue using it without the extra RAM. Hope this helps and have a nice day.

• Satellite Pro A60: Generic Host Process for Win32 Services has encountered a problem

  Satellite Pro A60 - Win XP Pro SP2.
  I recently started getting this error:

  "Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

  and I was wondering if there are any known issues specific to Toshibas or specific to the operating system?

  Any guidance advice appreciated.

  Well, it could be a virus or malware.
  I recommend you to update all your anti anti-virus applications and if you have not installed a program such as ad-aware or spyware so you need to do.

  Check if your all the service pack are up-to-date. Last use the installtion of new OS could help

• Satellite Pro A60 does not supply power to the top

  Hello

  I have a Satellite Pro A60 and when I turn on the machine, the lights come on and the fan whirls for about 5 seconds and then the machine just turns off again.

  No matter if I have the battery or HARD drive in or not, the same phenomenon occurs.
  I guess it's problem of CPU or power supply Board, but I don't know.
  Is there anyone else who has had this problem and if so how is it resolved?

  Any help would be appreciated very with gratitude that I am out of warranty and need the laptop when you work from home.

  Thank you

  Hello

  I guess it can be a single processor or card mother related issue.
  If there is something wrong with the power supply for laptop card then the cell phone would not turn on, even for 5 sec.

  But it's only my personal suggestion to make sure what's exactly wrong check specifications should be necessary.

  So I think that a laptop computer technician should check it out.

  Good bye

• Satellite Pro A60-138 PSA65E - cannot boot from c WEIRD

  Hello
  I bought this laptop on ebay, with no cd or manual.

  Satellite Pro A60 GR
  MODEL PSA65E-01K032GR NUMBER

  Hard drive is formatted.
  I tried to install xp, because I start the laptop it just says: "control system.
  Then press [F1]. "If I press F1, it tries to read the cd and gives up after a few seconds.

  If there is no cd in the cd drive there simply nothing.
  I tried to start the bios menu but everything works,(F12,F8,del) key.

  Is there something I can do?
  installing drivers or anything like that?

  Hello

  In order to access the BIOS please press F2, then ESC.
  This should load the BIOS and you can change the boot order there.

  In addition, you can press F12 at the beginning.
  This will allow the menu on the screen where you can choose the STRANGE as a source of start-up.

  But are you able to boot from another CD?
  The CD/DVD drive is unable to read the disc, and therefore the boot process fails

  You could also burn this disc Win XP on another CD and could use the new disk to the start I did with my old laptop because the CD/DVD drive didn't read the old CD.

• Memory should what upgrade I buy for my Satellite Pro A60?

  Hi, I have a Satellite Pro A60 PSA65E, who currently has 192 MB of RAM and 2.8 GHz Celeron processor.

  My problem came when I tried to install Adobe Creative Suite 2 on it, but it would not allow me to do so because he needed 384 MB of RAM to run it. I was wondering if someone could tell me what RAM upgrade is compatible with my machine and if it inserted in another port or if I have to get out the old and replace?

  Thank you
  Donald

  Hello

  your laptop is 256 MB internal memory, I'm not sure why it shows only 192 MB. This internal memory can be replaced only by a technician. But you also have a currently unused memory slot, in which you can place a maximum of 1024 MB of RAM.

  Here are the modules from Toshiba lets you:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Satellite Pro A60 USB TV tuner

  Does anyone know of a USB TV Tuner (PAL) who will work with a laptop Toshiba Satellite Pro A60 with integrated ATI graphics card?
  I tried 2 so far, Pinnacle PCTV and Compro Videomate Action, neither worked.
  The problem seems to be with the graphics processor ATI IGP

  Hello

  have you checked www.hauppauge.com?

  They're also good tuners TV, but please ask a Tech support guy. If there are problems with the ATI 7000 IGP chipset!

  Good bye

• Toshiba Satellite Pro A60 Celeron 2.8 GHz, 256 MB of volume?

  Hello

  I recently bought a Toshiba Satellite Pro A60 and I am pleased with the point, but despite the turn the music full volume and even the windows sounds are very quiet? To me it seems not be significantly quieter than other notebook that I used. This is how the element should work, or would that be a possible problem?

  Thanks for any help or advice you can give.

  Hello

  Did you scan you check all parameters in audio sounds and Audio Devices Properties?