Compatibility issues with the baseball game high heat 2004.

Similar Questions

• Compatibility issues with the old game - UbiSoft 'Adventures' happy Laura

  Any old hardware and compatibility mode experts out there?

  My daughter loved this UbiSoft program when she was little, she would like to try again for reasons of nostalgia, so I made my Christmas project to try to get it going again for her.

  She seems to have very specific graphic requirements.

  CD box says "Pentium 200 or faster Windows 95/98/ME ' and ' any 4MB compatible Direct 3D graphics" (* but see below for details)

  I tried on a laptop 8 win in Windows 95 and Windows 98 compatibility modes and it installs and runs the game, in fact but with display serious corruption - mobile figures produce black spots on static backgrounds and quick movement scenes produce large areas of black. I tried to set all the graphics options that I don't see in the game Installer so the PC itself, but there is no change.

  I have some old hardware PC lying around, so I tried first on a Windows XP faithful (Pentium 4 and NVIDIA GForce 6200 graphic) machine and the installation program is running - but not the game itself with joy

  I tried to run a virtual machine of MS on this PC to emulate Win98, but it seems to imitate the graphics card - so no joy

  Then I tried an AMD Semplon 3100 with VIA / S3G Unichrome PRO IGP graphics. I put in a new hard drive and put a new installation of Windows 98SP2 on it and the installer works (he asked me to reinstall Direct X - what I did with v9c) and the opening menu is displayed, but the PC crashes when I try to launch the game.

  I actually still the Pentium2 PC which took place the game on a map of 3Dfx Voodoo2, but at the moment, it is completely dead so I need to find a replacement PSU before I can even try this troubleshooting. I can't trade this 3Dfx card in the machine AMD as the AGP slots are different (3.3 volts and 1.5 Volt flavors...)

  Anyone got any bright ideas?

  The Readme file lists the specifications as:

  Minimum configuration
  ---------------------
  Pentium 166 MMX
  32 MB of RAM
  Accelerator graphics 3dfx Voodoo 1 or 2
  or card compatible Direct X
  PC, Windows 95, 98 and NT compatible CD-ROM
  12 x CD-ROM drive or faster
  Keyboard or a gamepad
  Monitor SVGA
  16-bit video card
  its 16-bit or higher card

  Minimum installation requirements
  100 MB of space on your hard drive

  Recommended configuration
  -------------------------
  Pentium 200 MMX or higher
  64 MB of RAM
  Of course, faster your processor and RAM you have,
  performance to the best of the game.

  The game supported 3D graphics cards
  ---------------------------------------
  NVidia:
  Riva 128
  Riva 128 zx
  Riva TNT
  Matrox:
  G100
  G200
  ATI:
  Rage Pro (4 MB - 8 MB)
  3dfx:
  Voodoo Graphics
  Voodoo II
  Voodoo Rush
  Voodoo Banshee
  Interpretation:
  V2200
  Intel:
  I740
  3Dlabs:
  Permedia 2
  Permedia 3
  S3:
  Savage 3D

  (Moved from other/unknown)

  Hi Andy,.

  I suggest you to please contact the developer of this game on the contact information given below, because this game is very old-fashioned and I doubt that it is running on Windows 8.

  http://store.playmobilusa.com/on/Demandware.store/sites-us-site

  Let us know if you need additional help from us.

• Compatibility issue with the version of media center 2004 and Windows XP Service Pack 3!

  I have a problem getting Media Center 2004 version compatibility to work with Windows XP, Service Pack 3. Does anyone know of a problem here? Are they compatible? If not, anyone know if there is a fix for this?

  The material that I was referring to is the material that you were talking about, namely your card graphic and sound card. I thought that this could be as simple as installing the correct hardware drivers.

  As I am not very familiar with your particular PC, it is not that I do. You can switch to the thread where PA bear you helped:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/why-cant-i-download-and-install-Windows-XP-SP3/64b9bffb-7048-4970-82b7-5746e32042dc

  or go to this page:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&product=top

  Or you might be able to find more relevant help at this forum:

  http://h30434.www3.HP.com/

  Good luck.

• How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  It is hopelessly outdated. It is simply not compatible.

  Mylenium

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.

• Compatibility issues with the latest Version of DAQmx

  This one has left me speechless, so I thought I'd go the bulletin boards.

  I am under some equipment that returns a voltage across a NI USB-6361. The company that hired me was using an older version of LabView (I can't tell you what, 2012 I think). In addition, they use DAQmx 9.5.5, that came with the USB-6361. (My problem is to get my a) hired computer USB and B) always keep all my VI DAQmx icons when I am in programming. If I roll back the ti software DAQmx 9.5.5, I lose my icons, but if I stay with DAQmx 9.9 I can see the USB to the MAX, but that's all. In MAX, I can't create a task or anything like that. It shows I'm using LabView 2013 as "Absent", and I've done everything I can think. Someone had this problem? How to fix it. I thought DAQmx 9.9 was supposed to be compatible with this unit. Thanks in advance for the help.

  Take a look at this:

  LabVIEW & DAQmx compatibility

  If you use a LabVIEW 2013 then you must have at least DAQmx 9.7.5.

  Kind regards, Jens

  EDIT: And Yes, 9.9 DAQmx must be compatible with your USB 6361

• compatibility issue with the software for Windows XP

  When I try to install a program, it says that I need to be runniing in windows XP. I try to install the program in compatibility mode and get the same message, and the program does not load. When I called the technical support for the program they tell me I need to download a donwload of compatibility for microsoft. I find no download for this issue. Thank you for your help.

  You could ask Zoll Medical to be more specific about any download (get a link) that they could help you.

  You are in contact with other users of this equipment you can ask them if they have similar problems and have any alliterative solution.

  Have you tried right clicking on the shortcut to the Setup.exe and choose the option "Run As Administrator"?

• Firefox for Android blocks on the hard disk of fire turn on one or two seconds after the start. Is there a compatibility issue with the Kindle fire HD?

  Load the latest version of Firefox for Android on the Kindle Fire HD & Installed. The program completed the installation process, but as soon as Firefox is started in a few seconds the program stops.

  Is there a problem with Firefox and Kindle Fire HD?

  I don't want to use Chrome and the browser of silk Kindle is not very good. I have Firefox on all my machines (desktop, computers cell phones, Android phone, 2 and (hopefully) Kindle) and want to be able to synchronize my favorites, etc. between each one for a consistent use.

  There is only an apk at this link. He is currently the fennec - 20.0 6 .multi .android b - arm.apk

• Satellite Pro 4600 the compatibility issue with the LG GCE8080n CD player?

  Hello

  got a used LG gce-8080n-engraver of cd for my 4600 to replace a cd-rom drive with my laptop has been delivered. After reading startup an error message: "Please press F2 to select the boot device. Then 'IDE #1 failure. Of course, the cd burner was not recognized correctly. Even though the cd burner may default, I want to rule out any problem to incompatibity. Thus information on a successful installation of a gce8080n Lounge on a 4600 would be greatly appreciated. Wolfgang

  Hi Wolfgang,.

  This error indicates that you LG burner are incorrectly configured as Master or Cable Select rather than Slave.

  Normally, the configuration is performed by riders on the disc itself, but in the case of the portable 'slim' readers, it is usually preset by the manufacturer in the firmware. This means that it is generally not possible to change the setting. : ()

  Kind regards

• Compatibility issues with the Sims 2 and Windows 7

  Ive tried all troubleshooting stuff as I can, but the game continues to crash and "application is now complete. It was working fine yesterday which is the annoying. Help!

  ----------------

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• English CC only version: compatibility issues with Windows 7 in Italian?

  Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

  Francesco

  Resolved:

  I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

  Thank you, bye

• Compatibility issue with IE 9

  I get the following error message after installing ie 9 and try to run VMware Service manager 8

  "Session error".
  Your session has expired or has been terminated by another officer sign in with your ID and password.

  Please sign in using your infraEnterprise URL. »

  is attached the screenshot of the error message

  However, VMware Service manager 8 opens and works with ie 8, then is there a compatibility issue with ie 9 or is there something that needs to be changed in order to make it work with ie 9?

  Note: I am running with the patch 43

  Like I said not released PR mentions IE 9 Support (including RP48, Gytis thanks for the ReadMe file).

  I triedRP48 with the versions of IE 9 (32 and 64-bit) on a 64-bit Windows 7 workstation but get the same errors:

  Session error
  Your session has expired or has been terminated by another officer sign in with your ID and password.

  Please login using your URL infraEnterprise