Compatibility issues with Windows Vista Business

Similar Questions

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• I have a computer with Windows Vista business on her key. I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Activation of WINDOWS VISTA oem with another oem drive?

  HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Hello

  A manufacturer of recovery disc is designed for a particular brand and computer model; they are not interchangeable.

  Here is the link to order the Acer recovery disks:

  http://us-store.Acer.com/RCD/

  And if the Acer never included a drive to purchase, you should have a recovery Partition on your hard disk to reinstall Vista to how it was when new.

  With an Acer, you press Alt + F10 at startup to start the process of recovery back to new condition.

  See you soon.

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• PC with Windows Vista Business OEMAct COA of second hand

  Hello

  I just bought a PC that has a Microsoft COA license sticker attached to it for "Windows Vista Business OEMAct" of second hand. It came without a HARD drive, so I installed my own and want to make sure that the key on the PC is still valid? If I can get my hands on a Vista disk, probably, I can install windows with this key and everything will be fine?
  The question I have, is that I can then upgrade to Windows 8 for the $39,99 deal? I don't see why not?

  Hello

  You must use the key to see if it is still valid. There is no public list kept.

  Hadou no reason why it would not be valid as long as you can not transfer OEM licenses which they were installed on the original machine.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Read the inmformation of Microsoft on Windows 8

  http://Windows.Microsoft.com/en-us/Windows/buy

  See you soon.

• English CC only version: compatibility issues with Windows 7 in Italian?

  Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

  Francesco

  Resolved:

  I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

  Thank you, bye

• Compatibility issues with windows 7 and maplestory

  I have windows 7 32 bit, I downloaded maplestory and when I clicked it, he jumped to the top with a box that says it has compatibility problems.  I tried to go to the properties of switching it forms XP SP3 and windows vista and rebooted but none of this seems to work.  I also went to troubleshoot compatibility and put it in my specefic problems, but it comes back with an error in Japanese.

  Help?

  Hello

  MapleStory has no information on the Windows 7 Compatibility Web site. The origin of the game specifications are for Windows 98 - XP.
  It is possible that they did not have it compatible with Windows 7 yet.

  You can check with the support of Maplestory for all hotfixes that may be needed to play the game on Windows 7.

  http://MapleStory.NEXON.NET/support/downloads.aspx

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Windows Vista Business

  Vista restarts continuously this morning. Try to run the update 3 0f 3, then restarts.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

  My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

  HI JourneysLady,

  I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

  --------------------------------------------------------------------------------------------------------------------------

  Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

  ----------------------------------------------------------------------------------------------------------------------------------------------------------

  Although I am an employee of HP, I speak for me.

  ---------------------------------------------------------------------------------------------------------------------------

• S2031: compatibility issues with windows 10

  I have an old Hp S2031 monitor of 3 years. I got a free upgrade to window 10. I received the following question from Microsoft:

  NVIDIA GeForce 6150Se Nforce 430

  Production of the display is not your screen compatible with Windows 10. Check with your support manufacturing.

  Is there a solution?

  The phase indicated in the post "NVIDIA GeForce 6150Se Nforce 430" comes from the graphic chipset motherboard.  If you have a separate graphics card solution, then it might still be OK.  This chipset is quite old by computer standards, so it should not be supported in Windows 10.  I would like to wait a few months, a workaround might appear to increase the demand for this chipset for Windows 10 support.

• I would like to know if I can play games from yahoo with Windows Vista business.

  IM new to vista

  Hello im william nance and I would like to know if I can play games yahoo with business vista I someone can help me to implement I love playing pool on yahoo

  William,

  Repost in this forum (Gaming) for assistance:

  http://answers.Microsoft.com/en-us/Windows/Forum/gaming?tab=unanswered>

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-gaming?tab=unanswered> VISTA

  Read this "sticky" before asking a question: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/2880cc71-bff1-493b-a9c7-05394bc2c782

  UTC/GMT is 04:39 on Wednesday, July 25, 2012

• Firefox 19.0.2 is having some compatibility issues with Windows 7

  When you start Firefox version 19.0.2 on Windows 7, the browser will crash immediately and gives me the crash for her window. Tried to restart the browser for several times and it still crashed on me, after that or I'm going to have to start using safe mode or run the browser by using the compatibility mode set to Windows XP (ongoing enforcement of the compatibility mode until the version of Vista works perfectly)

  Hi, try updating your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General while you are in safe mode.

• Code 19 cd dvd not working not not with Windows Vista Business-failure to load the software driver for ATAPI DVD A DH16A6S ATA Device...

  Barely noticed as useless before using the dvd on this machine cd - error code indicates... .Configuration (in the registry) is incomplete or damaged. (Code 19)

  Having read the other answers and the last similar validation seems to be dated to April 2010 of anything else because it please?

  I tried Driver Update and reinstall... .rebooting and then on the line ' difficulty his "all so far nothing works.  What is the latest information about this problem - can any that provide extra help or guide me for more relevant prior display and the best way to proceed. Failed to load software driver for ATAPI DVD A DH16A6S ATA Device...

  Mr. Fix it's obviously gone vacationing insofar as this problem is concerned... Cheers for any help.

  Hello

  Norton is known to cause slow downs and other issues. Uninstall and then running
  the Norton Removal Tool to stop the remains (even those will interrupt the strange) to load.
  Use the recommendations below when testing, even better would be permanently.

  Norton Removal Tool
  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  =================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• IntelliType and Intellipoint compatibility issue with Windows 7

  I have an older version of Intellitype and Intellipoint (5.3).  When I try to install using Windows 7, I get a message that it is not compatible.  Have I not all options available to me to update so that I can continue to use these devices?

  Thank you!  Here is the address for the choice of products by download.

  http://www.Microsoft.com/hardware/en-us/downloads

  Since were neither Intellitype and IntelliPoint, I selected IntelliMouse, and Wireless Comfort Keyboard.  After you have selected by selecting the operating system and the download, everything seems to work well.  Thank you!

• compatibility issues with windows 7 and card adapter and video screen in a computer laptop compaq nx7040

  After I installed Windows 7, 32-bit in my computer compaq laptop nx7040, there were two messages stating I have video card and display adapter problems. The pilots could be exceeded, but I can't find an updated driver. Can anyone help? Thank you.

  Hello

  This is an old machine (I know because I had one). It was a very good machine, but it upgraded to Windows 7 is a bit too far I think.

  Kind regards.