Compatibility question: replace GeForce 9500GS

My video card from nvidia geforce 9500gs finally gave up after having done non-stop noise during 3 days. The fan stopped turning tonight and now I need a new video card for my Hp Pavilion Elite m9510. I'm about to make a purchase online for a PNY GEforce gt440 I wanted to just confirm that it works very well with current 350 Watt power supply or please feel free to make suggestions for other cards. a big thank you in advance, Al

Hello

Unless you're ready to replace your power supply, the GT 440 is probably your best bet.

Tags: HP Desktops

Similar Questions

  • Compatibility and replacement of Vcard

    I have a Pavilion m8400f desktop computer. The current map of the media (nVIDIA GeForce 8500 GT) is kaput, and I would like to replace it with a

    EVGA nVidia GeForce GT240 1 GB DDR3 VGA/DVI/HDMI PCI-Express video card 01 G-P3-1235-LR.

    Are there compatibility problems?

    Hello
    Welcome to the HP Forum!

    myyk wrote:

    I have a Pavilion m8400f desktop computer. The current map of the media (nVIDIA GeForce 8500 GT) is kaput, and I would like to replace it with a

    EVGA nVidia GeForce GT240 1 GB DDR3 VGA/DVI/HDMI PCI-Express video card 01 G-P3-1235-LR.

    Are there compatibility problems?

    The only problem is that the PSU OEM has no minimum power capacity (minimum 300W). So for this card, you certainly need to update of the PSU.

    Kind regards

    ERICO

  • C: 1050 1050c C6074A 0B 0006 EMod compatibility Question

    I have a client with a probable error of EMod, customer is a few hours away from the office, it is not practical to stop for the diagnosis.

    I remember reading an article online about compatibility EMod seven or eight years and I think it says the only available at HP EMod is part C6074B the Firmware and the memory should be replaced if the new EMod version has been installed in the printer C6074A.  I hope someone can check this for me.

    I suspect that HP sells is even more the EMod for this machine, they dropped officially supported in 2006.

    I also recall that in the case of this error message of leakage cable replacement and transport is also recommended. (Belt too if the cart is replaced).

    Overall I informed my contact as the reclassification to a T1500 and using the October 2015 DesignJet trade / trade Up Program would be my recommendation, because although I have difficulty the 1050c there are other components that may fail due to age, (System of Tube and Station Service), and if I had to replace all of the parts needed to put the machine in "New condition" that they could spend as much as a new machine would cost.

    The C6074B is the model most and the main card will fit in the chassis of C6074A, but the back cover will line up for the EIO housing and housing will be available.  0B 0006 is usually the Kiss to death on the C6074A, unless it's one of the machines later of the C6074A that came with the fuse as the model liked.  15% of a tips maybe the fuse.  Yes, you will need firmware that corresponds to the Commission of 'B' and the memory chips which are not the same as 'A' memory of Council.  My only different recommendation of yours would be to recommend the T520 which is much less expensive and more looks to plug its former c. 1050

  • Video card compatibility question

    I need to replace my video card ATI Radeon HD 4850 (GDDR3) for my HP Pavilion Elite.

    I have 2 questions:

    (1) a graphics card with GDDR5 memory would be compatible with my motherboard and a computer?  (my current graphics card is GDDR3)

    (2) PCI Express 3.0 would be compatible?  (my current graphics card is PCI Express 2)

    Thank you.

    Motherboard:

    Tip: PEGATRON CORPORATION TRUCKEE 1.04
    The bus clock: 133 megahertz
    BIOS: American Megatrends Inc. 5.22 10/12/2009

    System:

    HP-Pavilion, AW020AV - ABA e9280t

    Windows 7 pro 64-bit

    Processor:

    3.33 GHz Intel Core i7 975 processor
    cache of 64 kilobytes main memory
    cache 256 KB secondary memory
    memory tertiary cache 8192 KB
    64-bit ready
    Multi-core (4 total)
    Hyper-thread (8 total)

    12 GB of Ram (I think than DDR3)

    dim13 wrote:

    I need to replace my video card ATI Radeon HD 4850 (GDDR3) for my HP Pavilion Elite.

    I have 2 questions:

    (1) a graphics card with GDDR5 memory would be compatible with my motherboard and a computer?  (my current graphics card is GDDR3) Yes. The video memory is on the video card and is not a problem.

    (2) PCI Express 3.0 would be compatible?  (my current graphics card is PCI Express 2)

    It is also an answer yes because PCI Express 3.0 is a compatible specification down.

    Thank you.

    Motherboard:

    Tip: PEGATRON CORPORATION TRUCKEE 1.04
    The bus clock: 133 megahertz
    BIOS: American Megatrends Inc. 5.22 10/12/2009

    System:

    HP-Pavilion, AW020AV - ABA e9280t

    Windows 7 pro 64-bit

    Processor:

    3.33 GHz Intel Core i7 975 processor
    cache of 64 kilobytes main memory
    cache 256 KB secondary memory
    memory tertiary cache 8192 KB
    64-bit ready
    Multi-core (4 total)
    Hyper-thread (8 total)

    12 GB of Ram (I think than DDR3)

  • HP Deskjet 3055a: HP 301XL COMPATIBILITY QUESTION

    Hello

    I have a question about the compatibility between my printer and an ink cartridge. I'm hoping to buy a cartridge of ink HP 301XL Tri-Colour of this store: http://www.argos.ie/static/Product/partNumber/1384677/c_1/1%7Ccategory_root%7COffice%2C+PCs+and+phon...

    I wonder if it will be compatible with my HP 3055a Deskjet printer. The website says that the cartridge is compatible with HP Deskjet 3050, it means its compatible with the 3055 has?

    Also, what I have to buy a black cartridge to print colors black or is this included in the Tricolor cartridge?

    Thanks in advance.

    Hello

    You must always black ink cartridges even all 3 colors preferred a good amount of mixture will give all colors from black to white.

    Kind regards.

  • HP Jet 11-d010nr: compatibility of replacing the screen

    I am trying to replace the screen on the stream Hp 11 - d010nr of a laptop HP flow 11-r014w. Is it possible to make it work?

    Hello

    Number of screen for HP stream 11 part -rnnnaa machines is 834445-001:

    http://PartSurfer.HP.com/search.aspx?SearchText=834445-001

    It is not compatible with HP flow 11 -dnnnaa machines.

    Kind regards.

  • HP Pavilion p7 - 1227c: GDDR5 graphics compatibility question card XFX Radeon R9 380 4GB with HP Pavilion p7 - 127c?

    I bought this Radeon R9 380 4 GB from Ebay and installed it in my computer, but it won't work. Turn fans of the graphics card but the PC screen remains black. I contacted the seller who said that the video card has been tested prior to shipment and that it may be a compatibility issue with my PC. I know that this graphics card has a PCI Express 3.0 interface 16 x so that my PC has a PCI Express 2.0, but I don't think that this could be a problem.

    Do you know if there is a problem of compatibility between the graphics card XFX Radeon R9 380 4 GB of GDDR5 memory and the HP Pavilion p7 - 127C?

    Note: I move the power supply to 650W.

    @Astyx, welcome to the forum.

    You are right that the PCIe 3.0 is backward compatible with PCIe 2.0.  However, your problem is the motherboard.  The Radeon card requires UEFI in the motherboard instead of a Legacy BIOS. The BIOS may not be walking in the UEFI.  PCIe 3.0 cards requiring UEFI will not work in any other location.  HP didn't start using UEFI until mid-October 2012.  The latest maps to exploit without UEFI are the GTX 660/670.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Satellite A300 - 1 L 0 - display compatibility question

    Hello!

    One of my friends got a Toshiba Satellite A300 - 1 L 0 Notebook with broken screen.
    On Ebay that he was lucky to get a laptop Toshiba A300-1HP, which is optically identical to his book and regarding the roadmap Toshiba product has almost the same technique except the Core 2 duo model, ATI HD 3xxx model specifications and the size of HARD drive, as far as I can tell. The screen has the same features on the product sheet.

    More on ebay, there are "universal" sold screens for satellite A300 - meaning if you type "Satellite A300 Display" didn't it specify which A300 model you have.

    What you mean?
    Are the poster at least "Pin Compatible" or why it has an engineer / engineer use a different layout of the pins on the same box for laptop?
    The A300 has more motherboards even?

    Thank you!!!

    Hello

    I guess that all screens for a Satellite A300 series should be compatible with the unique Satellite A300 model.
    All laptops Satellite A300 was equipped with a TFT 15,4 "billboard and it is the most important fact. You must use this display TFT 15,4 "Panel.

    The resolution may be different and will not affect the display compatibility because the graphics card is able to support different resolutions.

  • Compatibility question Satellite P200D-12 - need new motherboard-

    Hello...

    I need to know the model motherboards that are compatible with the following model:

    Satellite P200D-12. Code: PSPBQE-02F019CE. AMD Turion 64 X 2 TL - 60 2.0 GHz.

    My motherboard has suffered internal damage, and I need to replace it with the same MB or compatible.

    Thank you.

    Hello

    You need a motherboard that is designed for Satellite P200D series.
    P200D supports an AMD chipset, so you must choose this motherboards.

    But note; new motherboard is not a party at low prices then you must consider this

  • Installation of LabVIEW Runtime Engine 2016 compatibility questions...?

    Hi, I have just a quick question...

    I just download LabVIEW Runtime Engine 2016 in a PC at work. I need to run a VI in this PC that has a few executables 2015 VI for the moment. My question is, if I install the runtime from 2016:

    • Will there be any problems with executable files that have been compiled with the version of LabVIEW 2015?
    • Or these VI is fully compatible with Runtime 2016?

    Thank you in advance to all!

    JLuna wrote:

    I just download LabVIEW Runtime Engine 2016 in a PC at work. I need to run a VI in this PC that has a few executables 2015 VI for the moment.

    I guess 'the PC' has already the LabVIEW 2015 engine run. It is still necessary to run the executables of 2015. You must install the engine LabVIEW 2016 run if you also want to run executables built with LabVIEW 2016. Both the run-time engine can be installed at the same time.

    In order to run screws, you need the LabVIEW Development System. LabVIEW 2016 can generally open, recompile, and run screws LabVIEW 2015 (and many old versions, Details).

  • Remove the video card Geforce 9500gs


    Hello

    I had the same situation when I went to replace my 8600 NVIDIA.  The SPDIF connector was very stubborn.  I thought that maybe I was going to break the connector but persistent stirring and lifting in even finally release.

    You may need to insert the screwdriver of jeweler with a thin blade between the connector and the socket to loosen the two pieces.

  • Pavilion Elite M9300T: upgrade geforce 9500gs

    I have a Pavilion Elite M9300T KZ854AV #ABA with CPU Q9300, 3 G of RAM and 750 GB 7200 RPM / MIN SATA 3 GB/S HD.  I want to improve the memory, the operating system & video card.  The current map graphic is a NVIDIA Geforce 9500 GS - 512 MB.  I don't do a lot of game but with Cyberlink Power Director 12 video editting.  Extremely slow rendering video during editing.  Is there a map 'step-up', I can go to without having to upgrade the POWER PC block?  Looking for some recommendations on the new cards.  Currently have Vista Edition Home Premium - 32-bit but want to upgrade to W7 Pro - 64-bit as part of the upgrade process.

    You are welcome.  Thank you for the additional information.

    The reason why I give you a recommendation of the video card is for the reasons I said.  Most of them won't be better than what you have, and it is difficult to find a retail map that will work with your power supply 350W. However, I talked to Technical Support EVGA (1-888-880-3842).  He said that the cards that are compatible with your motherboard 2008 are limited.  He recommends is an EVGA GT 640.  I recommend you call their Tech Support to ensure it will work with your motherboard and BIOS.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Compatibility question

    The Sony XYST1M micro is compatible with the Sony PJ710 camcorder? Can it be connected with a cable?

    Hi gmarkovich,

    Yes, the ECMXYST1M micro is compatible with the HDRPJ710 camcorder. But you will need to attach the microphone on the support of VCT55LH and to connect the two devices via a cable to use. The foot of the microphone will not directly adapt to the shoe of the camcorder, that's why you need the support.

    If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

  • Beginner question: replace the background color

    I have a simple TIFF image that has black and white inside. I would like to create an image where all the White was replaced by complete transparency. How do I do that?

    You can do this simply by playing an action http://forums.adobe.com/message/6079459#6079459#6079459

  • Power Supply compatibility question

    Hello!

    Tomorrow, my new Dell XPS 8700 arrived. I opted for the internal model with 8 GB of RAM and 1 TB HD, Intel i7 4790.

    In the meantime, I ordered a few updates - specifically a 128 GB mSATA drive, an extra 1 TB internal HD and a Gigabyte GTX 960 overclockee edition.

    Currently, I have concerns that the stock power supply may not be up to the task - and am shopping around just in case. I met one at an incredible price, and have two questions for anyone here with experience in this field:

    (1) Will Dell installed standard power supply handle additions above?

    (2) if not, is compatible with the machine down and architecture Haswell?

    www.TigerDirect.com/.../Item-details.asp

    Thanks a lot in advance for any help!

    Welcome to the club of 8700 XPS!

    XPS 8700 OEM power will be well with a GTX 960.  No reason to spend, even if you add the mSATA and an additional HARD drive or two.

    The mSATA reader will probably less than 5 extra watts, and the HDD is maybe 10 watts max.

    And, insofar as this power supply, it seems that it is done by abderrazak, and is not a manufacturer that I heard a lot about.

    http://www.TomsHardware.com/Forum/351015-28-will-andyson-make-good

    I stick to Seasonic, some of the highest in Corsair or Silverstone, and their research before investing.

Maybe you are looking for

  • Function keys not working only not with screen sharing

    Sierra running on all machines. Until the update, I would use on iMac 2014 screen sharing to access a Mac Mini 2011. Everything worked very well. However, after update, function keys no longer work through screen sharing. I confirmed the screen shari

  • How do I burn a file .img to a DVD and have it be an executable file?

    How do I burn a file .img to a DVD and have it be an executable file? It seems that used to be possible using disk utility, but not more for some reason any.

  • How to recover messages lost after upgrade to El Capitan

    After the upgrade to El Capitan! 0.11.3 much mail in Apple Mail has been lost. How can it be recovered?

  • slow charge of Windows mail

    Clicking on a shortcut to Windows Mail does not always brings the program.  Sometimes, a few clicks are necessary.  Other programs do not behave like that.  This computer is used primarily as a repository for email and photos.  There could be as much

  • noob need help with background__

    I play games online and I'm still getting kicked for Hi ping.thought that I would be closed a few things. 1 of these something on the Defender, was now when I start his shot and miss out on the weather that my background is rising on 32-bit or 16-bit