compatible driver for CanoScan N650U/N656U

Similar Questions

• H have a computer that runs windows vista Ive had on the line using Xp professional, but it seems that I can't find a compatible driver for the audio card suggestions?

  I have a computer running windows vista that Ive had on the line running on the line with professional Xp but it seems that I can't find a compatible driver for the audio device. Ant suggestions? The Pc has a legacy, it's a Compaq laptop

  Hi morningstar410,
   
  -What is the brand and model of your laptop? Specify the same thing to help us find the right audio driver for you.
  -For which version of the operating system you are looking for the driver?
   
  Visit the following link and check if you download the drivers here:
  http://www.Compaq.com/CPQ-country/cpq_support.html
   

  In the meantime, follow the three steps solution given in the link below and see if this helps you.

  No sound in Windows

   
  Keep me updated on the status of the issue.

• Driver for CanoScan FB630U Windows 7

  I n I find the driver for CanoScan FB630U Windows 7... That help?

  See http://software.canon-europe.com/products/0000461.asp.

  The latest driver for the FB630U is for XP. There is no drivers Vista or Windows 7.

  You need a new scanner.

• where can I find a driver for canoscan lide 30 that is compatible with windows 7?

  Windows 7 64 bit

  There is no driver for win7 64-bit, it's not compatible

• Need a driver for CanoScan 9950F

  I have A CanoScan 9950F which is not compatible with my Windows 7 Premium Edition. The driver for a 32-bit system, new 64-bit system. No driver problem on the Canon site for this problem. Bright ideas out there?

  Get a device support.  If the manufacturer doesn't have 64-bit drivers, then no one else will, and if they offer compatible driver and no advice on what will work the other/other drivers, here again, no one else will have.

• Driver for canoscan 1240u

  I have windows 7 with canoscan 1240u. need driver for scanner using windows 7 to * address email is removed from the privacy *

  Canon supports more driver CanoScan N1040U but you may be able to use a third party software solution by installing an alternative software and hardware drivers. The best results seem to come from the installation of the drivers of VueScan from www.hamrick.com. They have developed their own set of drivers to scan for many models of scanners and all-in-one.

  The documentation of VueScan specifically lists the CanoScan N1040U model in his section of supported Scanners .

  Note that after a period of demonstration, there is a cost associated with the VueScan software. Without the software package, the only drivers may or may not work long term for your particular installation.

• Windows 7 Ultimate compatible driver for Philips SAA7130HL Multimedia Capture Device?

  Where to find the compatible driver Windows 7 Ultimate for Philips SAA7130HL Multimedia Capture Device?

  Hello

   

  Method 01:

  I would say go to devices and just by clicking on the Device Manager and updated driver for the device and check if you can get the drivers.

  Open the http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager Device Manager

  If you have the drivers CD, you can try to install the drivers and see if it works well or not, can also try compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  Method 02:

  I suggest you to check the Windows Update to see if a driver is downloaded and installed automatically.

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I suggest you contact Philips for support with this device:

  http://www.support.Philips.com/support/contact/contact_page.jsp?userLanguage=en&userCountry=us

• Have Digital (DEC) DEClaser 5100 printer. Someone at - it a compatible driver for Win7-64? cc = us

  The only suggestion I can find on the internet is to get the driver to a Windows XP Home 64 bit edition installation disc, but I don't have one of those and do not know where I could get one.

  OK, I have this morning, I tried (as dansdaduk suggestts) just use the W7-64 driver for the HP LaserJet 4/4 M PS driver on my system. I thought about it earlier, but had tried to install the printer as a network printer. Windows would never let me choose this driver because it does not match the network printer. This time I come to install a local printer with this driver. I used LPT3: and he redirected in the same way as previously (see below) and it worked without buckle. All that bad and I was could have in 5 minutes.

  Reading to see my first solution and some background information...

  I got 64-bit PostScript HP Universal print driver on the HP support site. (Just specify W7 - 64 as your operating system and research of this description)

  As part of the installation of the driver he walked me adding a printer, but I went wrong.   So I just clicked on "Add a printer" the driver installed and selected manufacturer: "HP" and printers: "HP Universal printing PS".  My printer is physically attached to an XP system with a parallel cable and is shared on the network, so I installed the printer on my W7 system as a local printer on LPT2: and used this command to redirect in the CMD window:

  NET use LPT2: "\\server\sharename" / persistent: yes

  Make sure you do NOT try to redirect LPT1: you'll probably all sorts of problems.

  It has connected to the printer, but then I got an error on the printer:

  "This job requires more memory that it does not exist in this printer".  I have 6MB in my printer, so I put it in the printer properties.  I also crossed and turned off the features that I didn't and specified PS level 1 and optimize for portabiliity.  I still have the error of memory so I searched the error text and find a resolution of MS to: http://support.microsoft.com/kb/248397 who showed me how to change the Option to download TrueType fonts to Bitmap and everything seems to work now.

• Need driver for Canoscan LIDE 60 WIA / Windows 7-64 bit

  Cannot find this driver anywhere. Are there?

  Scanner CanoScan Lide60

  You must ScanGear CS 11.110 has from your regional Canon website. Look under Support for the drivers.

• WDDM compatible driver for windows 7 ultimate 32 bit

  Help me I have a dell dimension just put 3000 upgraded to windows 7 Ultimate edition and the video card is not compatible. any suggestions?

  First glance on front of the Dell/back/lower computer for a sticker containing the serial number. It should look like this:

  

  ... and contain a number of service made up of 7 letters and numbers. Then you get on the Dell Support site (click here) and the entrance to this service tag.

  You will have a page web that contains all the necessary drivers and software that came with your Dell computer when it left the factory. Don't forget to get the drivers and software for your version of Windows. Looking for a driver support Windows 7 operating system.

  Dell Support site

• I have problems to load Windows 7 driver for Canoscan 4200f Canon's site

  I downloaded the driver from Canon site which has been saved in a folder 4200fvst8611a_xpen. In this folder, it created a file called Set Up SG that is a .exe file.  When I open this file, it passes by Winzip Self-Extractor as Canon ScanGear CS 8.6.1a_xp Set Up and then nothing happens.  Cannon suggested that the I need to find where the computer stores the extracted file, and then run it form there.  I did a search of system using "Canon ScanGear" but it is empty.  WinZip Self-Extractor stores files in a fixed location?  Any other ideas of what I could do wrong?

  You are looking for something that does not exist.

  Run the 4200fvst8611a_xpen.exe of origin file installs the scanner, including scangear driver. ScanGear is not a stand-alone program, it is only open during the process of acquiring some program graphics you scan in. Assuming that you have installed the Canoscan Toolbox, you can also open Scangear from there by checking the box labeled "Use the driver scanner to make advanced adjustments". Otherwise, you never see the scangear interface and it was just a quick scan using the settings for any Toolbox button you have chosen. Scangear advanced mode, you can change various preferences including whether it closes automatically after each scan.

• Compatible drive for Satellite L30-134 (PSL33E-00E00WRU)

  Please indicate internal what HARD drive I should buy for my laptop Satellite L30-134 (PSL33E-00E00WRU)?

  Hello

  I found a similar thread here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51895

  As you can read you can install each 2.5 HARD drive with SATA interface. It is no problem and you don't need a certain brand. Just buy this model you prefer ;)

• Is there a compatible driver for Vista on a Lexmark x 125

  Research says unknown

  Hi smith F,.
  I couldn't find any of Lexmark, but this driver Lexmark x 125 for all windows versions http://drivers.softpedia.com/get/PRINTER/LEXMARK/LEXMARK-Printer-X125-Version-10012.shtml seems to be good.
  I hope this helps

• Compatible driver for a HP Officejet Pro 1150c for Windows 7

  Hi I want to install the Unit mentioned above to my laptop into a USB port, but it is not compatible Windows 7 can you help me

  Hi Pieter,

  Please refer to this link to download the drivers for Windows XP and install it in compatibility mode for Windows 7.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=12049&prodSeriesId=24382&prodTypeId=0&TaskID=135&swLang=8

  Check this link to find out how to install drivers in compatibility mode for Windows XP:

  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Please get back to us with the State of the question.

• is there a driver for canoscan lide 60 that runs on windows 8

  installed the installer disc win8 not reconise driver was on xp

  Not on the original CD and not on the Canon website.

  There is a Twain for Windows 7 driver that can work with Vuescan to give you a comprehensive operational, but Vuescan costs $$.

  You could however try and decide if you want to go this way or buy a new scanner...

  You need downloads...

  TWAIN driver... http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide_60#DriversAndSoftware

  VueScan...

  http://Hamrick.com/  You can run the trial version to see if it works