Compatible DVD - ROM for Dimension desktop PC

Similar Questions

• Compatible DVD - ROM for Satellite Pro 4320

  Hi guys!

  I want to put in a DVD - ROM drive in my Satellite Pro series 4300 (SP4320) to replace the current cd-rom installed TEAC. I was wondering what dvd - rom readers would be appropriate.

  Would be especially drive DVD TOSHIBA sd-c2302 model and the drive DVD Teac DV - 28F be compatible with my laptop? Sites, I checked that the TEAC seems to be cheaper...

  In any case thanks for any advice!

  FONZ

  Hi Faisal

  I m not, of course, what car models are compatible with your device. In my opinion the best thing you can do is to contact a Service partner and ask for more information.

  Reach
  http://EU.computers.Toshiba-Europe.com - Supports & downloads you will find a list of all the European partners in Service.

  Good bye

• M30-704: compatible DVD - ROM readers?

  the multidrive on my model m30 704 went to heaven of discs and I need to get a new optical drive. broken drive is a Matsu * a multidrive UJ-811.

  which drives are compatible with my camera? What are the issues that I have to look? should I get a disk the same brand, or can I change the brand?

  In addition, I don't need the full DVD burning / package DVD RAM - would be possible to 'downgrade' the reader and opt for a cheaper option, say with only the capabilities of DVD playback? [to the United Kingdom, so region 1 discs come out].

  I'm very confused by all this and would appreciate greatly any help at all.

  Hello

  If you want to buy a new disk, you must check the compatibility because not just any player is supported as a result of the assignment of pins.
  Unfortunately I put t found all readers outside Matsu * a UJ-811, but I m sure it is possible to buy only a DVD ROM without the option of engraving.
  In my opinion, you should ask the service partner for the supported CD/DVD drive.
  In addition, you can change the DVD region four times without any problem. Please check this option in the properties of the drive.

  Good bye

• How can I get a DVD ROM for Portege My drive

  I bought an external DVD Rom type Toshiba PA3246E and Realplayer says that I need the native driver for topay DVD movies. Anyone know where/what should I download.

  V

  Hello

  I hope that your player works properly with all the media you are using. This native driver is obviously not Toshiba stuff and Google all over the place and pick up some information about this.

  Sorry, but I didn t understand what DVD movies you want to watch.

  Good bye

• Need drive combo CD-RW/DVD-ROM for Tecra 8200

  I just bought an old Tecra 8200 with a CD-Rom drive in the SelectBay.
  I would change to a CD-RW/DVD-ROM combo drive.
  Could someone let me know the correct for this combo drive model number please?

  Best wishes

  Michael

  How about this:

  * PA3073E - 1 CD 2 *.
  4 x CD - R, 4 x CD - RW, CD-ROM 24 x, 6 x DVD-ROM

  and it supports this media:
  (Read/write) CD - R, CD - RW (read, re-writing), CD-ROM, DVD-ROM, DVD - R (read only), DVD - RW (read only)

  Greetings

• Compatible Dvd burner for Satellite A30 P4 2.8 ghz

  Can someone tell me if there is a compatible unit internal dvd burner for my Satellite A30-514 P4 2.8 GHz/WXP HE/512 MB / 30 GB/15TFT/DVD-CDRW. And where I can get a.

  Hi Michael,

  I've changed the original CDRW in my A30 - 141 (a TEAC DW224E) for a carpet * a UJ825S with no problems at all. I just need to exchange the plastic parts of the old drive.

  I don't think that the UJ825 is still available now, but future versions should do just fine.

  I burned a DVD on the carpet a lot * one without any problems, so I'm very happy with it.

  Try Googling for a suitable device, I found a range of price, when I searched for mine.

  Kind regards

• CD/DVD-ROM for reading CD / DVD RAM only...

  I reinstalled Windows XP due to problems with my system works only with Win7.  I did a clean install.  Windows XP installed a generic driver from microsoft CD/DVD RAM.  For this reason, I am not able to access the DVD ROM discs, no discs as CD ROM and DVD RAM disks.  I know that there is a way to change things so the system sees that I have a DVD ROM and not only a DVD RAM.  It's just think WinXP that my readers are only DVD RAM drives work very well.  They work perfectly with CD and CDR/RW and will work with a store bought DVD.  I just can't figure how to change the generic Microsoft for DVD RAM DVD ROM driver  I had this problem before, I don't remember the fix. I deleted the registry entries, I deleted the readers, only for have reinstalled them with the original drivers.  I have 2 drives, both are LiteOn.  LiteOn has no drivers for the drive and says they are "plug and play".  Any help would be greatly appreciated.  Thank you.

  I tried this also.  He said: there is nothing wrong with my CDROM or it says that my CDROM is not able to write DVD and install one that can.  Thank you.

  To access device manager > right click on the CD/DVD rom device and choose uninstall. Restart the computer and allow windows to detect the new hardware.

• DVD player for Dimension 2350 and 4600

  I need to install DVD drivers in two of my computers one is a Dimension 4600 the other a Dimension 2350, I found a driver online Sony NEC Optiarc black IDE DVD-ROM Drive model DDU1615/B2s - OEM will this work on both computers?

  
  

• What is a compatible DVD player for Satellite P30 145

  Hello

  My DVD player packed. We know what readers out there are compatible with this laptop. I am currently looking for a NEC ND-6750.

  Thank you very much.

  Hello

  Did you look in the user manual?

  In my manual that was preinstalled on your laptop, I found a list of compatible drives.

  I think the similar list with disks taken in charge and compatible, you will find in your manual document.

  Otherwise, you could ask the guy to service Toshiba for the compatible device.
  You know, it is important that you purchase a supported player with the settings of the master/slave/c-salt because it of not possible to change these settings later.

• New DVD-ROM for Satellite S1800-750

  Hello

  My Satellite S1800-750 DVD player not working anymore. My question is: can I replace it with the original SD-C2502 only, or are there also other (perhaps more recent) readers who register in the same dwelling?

  The SD-C2502 does not support DVD + R discs for example, which would be quite a good service practice to have...

  Thanks in advance
  Firlionel

  That means the user manual says?
  Have you checked it?

• Satellite L40 - 17r: need driver for DVD Rom for Linux Fedora Core 7

  I'm having a problem in instalation.
  When the installation program asks to select the location for the Viewer it is to say the cd - dvd package and is selected then he pass message to select the driver for this drive or select the disk given.

  I don't have the driver and I use Toshibe satellite L40 - 17r laptop computer I have to do.

  Everyone?

  The problem is that Toshiba doesn't support all the drivers for the Linux OS distributions and therefore you can't find on the page of Toshiba.

• Where can I find a driver for cd/dvd rom for a hp compaq presario f700 laptop. ?

  MY PILOT JUST DISAPPEARED AND I can't READ DVD, S or CD or BURN MUSIC /.

  Hello

  Check with HP, their drivers support and documentation online and ask questions in the forums on
  known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =================================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Winows movie maker wil not accept a movie stored on dvd rom for the purpose of amendment. How to import it movie maker?

  the film is currently on a DVD - RW disc

  I downloaded videos, but it will not matter on moviemaker?

  Looks like you may have a corrupted video file.

  A different Converter might be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  iWisoft Free Video Converter
  http://www.iWisoft.com/videoconverter/

  Features of Free Video Converter
  http://www.iWisoft.com/videoconverter/video-converter-features.php

  How to use iWisoft Free Video Converter
  http://www.iWisoft.com/videoconverter/video-converter-tutorial.php

• Compatible hard disk for Pavilion a475c

  I want to spend a Pavilion a475c desktop computer hard drive.

  Existing hard drive: 160 GB 7200 RPM Ultra DMA

  Upgrade the hard drive, I'm considering:

  Western Digital Caviar Blue 500 GB Bulk/OEM hard drive 3.5 inch, 16 MB of Cache, 7200 RPM SATA II WD5000AAKS

  This player is compatible?  Are there changes to the BIOS?

  It is a bare drive OEM and doesn't come with wires or screws.  I have to get a SATA cable screw or power cable?

  bradoneill wrote: thanks for the reply, Hanspuppa.  A few questions. I forgot to mention the operating system is XP Home SP3.  Given that the original hard drive is already greater than 137 GB (it's 160), does that mean that 500 GB should be no problem as well. If it is not a SATA port (I don't have access to the computer right now, he's a friend) I found a SATA Serial ATA Hard Drive/CD/DVD-ROM for of PATA/IDE Interface adapter to convert from Amazon.com to http://www.amazon.com/gp/product/B002Y2NI4M/ref=ord_cart_shr?ie=UTF8&m=A10GIQVUTYZMGS for a long time that I have the power adapter and SATA cables, you see no problem with that...? As

  Hello bradoneill, if the system BIOS already takes in charge the 160 GB hard drive, it should support the 500 GB hard drive.

  Windows XP SP3 should support the 500 GB HDD in addition.

  I'll try to use the Sata port without an adapter. I've never used one of these cards, but I read some reviews that speak well of them. Some reported they have caused data errors, but that might have in the early days when these devices first became available.

  If you can and should use the adapter, you can use it on the DVD player if you need to liberate one of the Sata ports. This would almost ensure you no problems with this card, and if there were, it would be on the DVD drive and not the hard drive where the operating system would not be compromised.

  Just some thoughts.

• Adding a DVD - ROM Samsung (IDE) to a hp p6540f

  I want to add that an IDE controlled DVD - ROM for hp 6540f.  He already has a controlled SCSI lightwriter DVD.  There is room to put it in but I don't know if the IDE will be compatible with the connections inside the hp6540f?

  Any thoughts on what I'll find when I open the case?

  There is no IDE connector on your motherboard, it's a pain to add it, you will need to purchase a PCI-E x 1 IDE controller card, install it, and then connect it to one.

  http://support.HP.com/us-en/document/c01925486