Compilation of trigger error

Similar Questions

• FRM-40735: trigger ERROR raised unhandled exception ORA-06508

  I am having this error when executing my form this error before the page load screen I have not een know what trigger causes error

  FRM-40735: trigger ERROR raised unhandled exception ORA-06508'm in oracle 11 g 2 of the form how to find on which trigger causes error

  Hello

  Below is the cause of the error and for more information, see the link below.

  Question: An attempt was made to call a stored program that cannot be found.

  ORA-06508: PL/SQL: not found unit of programs called tips

  Oracle/PLSQL: ORA-06508

• Media Encoder: Error compiling Movie - unknown error

  As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

  Hi Charles,

  Have you tried to export with Premiere Pro?

  Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

  Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

  Have you tried to make the scenario first before export?

  If possible send a screenshot of the full timeline.

  Vinay

• Cannot restore: error compiling Movie: unknown error

  Hey there,

  Need help,

  I'm working on a short sequence (15 seconds).

  It has a few stacked video channels and I have applied overlays and fixed most of the color channels.

  The film is XMF files from a C300. Sequence of parameters defined in accordance with the proposed recommendation (IE when I dropped the clips).

  I get the "error compiling Movie: unknown error" message whenever I try to make or export.» I went through a lot of steps suggested by a blog post, I found here - I went through the sequence, removed the clip, has tried to return, then removed the effects.

  When I deleted the effects and buried the clips off side by side he made out for me.  That's great, but I have to be able to export the effects all in and empty them in layers. What can I do? Starting to pull my hair!

  Details...

  CS6. O

  MacBook, 4 GB Ram,

  Graphics card: NVIDIA GeForce GT 330 M 256 MB

  Thank you,

  Simon

  Hey,.

  Thanks for the tip - tried all of those, unfortunately with no joy.

  I have not deleted my cache - also no joy.

  BUT I installed a (now 6.0.5) update and it does.

  Thanks for the help,

  Simon

• instead of trigger error

  Hi all

  I use

  Connected to Oracle Database 11g Express Edition Release 11.2.0.2.0

  I use the Oracle HR schema

  CREATE TABLE EMPLOYEES_COPY2 AS

  SELECT *.

  EMPLOYEES

  CREATE TABLE DEPARTMENTS_COPY2

  AS

  SELECT * FROM DEPARTMENTS

  CREATE TYPE employee_type AS OBJECT)

  VARCHAR2 (25) LAST_NAME,.

  E-MAIL VARCHAR2 (25).

  DATE OF HIRE_DAE,

  JOB_ID VARCHAR2 (10))

  CREATE THE EMPLOYEES_LIST TYPE

  AS THE employee_type TABLE

  CREATE VIEW DEPT_EMP_VIEW

  AS

  SELECT D.DEPARTMENT_ID,

  D.DEPARTMENT_NAME,

  CAST (MULTISET (SELECT SELECT,)

  E.EMAIL,

  E.HIRE_DATE,

  E.JOB_ID

  OF EMPLOYEES_COPY2 E

  WHERE E.DEPARTMENT_ID = D.DEPARTMENT_ID)

  AS EMPLOYEES_LIST) PGE

  OF DEPARTMENTS_COPY2 D

  SQL > CREATE OR REPLACE TRIGGER IO_BIFER_DEPT_EMP_VIEW

  2. INSTEAD OF

  3. INSERT ON DEPT_EMP_VIEW FOR EACH LINE

  4 BEGIN

  5 INSERT INTO DEPARTMENTS_COPY2 (DEPARTMENT_ID, DEPARTMENT_NAME)

  6 VALUES (: NEW.) DEPARTMENT_ID,: NEW. DEPARTMENT_NAME);

  7

  8. FOR i IN 1.. : NEW. PGE. COUNTY

  9 LOOP

  10 INSERT INTO EMPLOYEES_COPY2 (LAST_NAME, DEPARTMENT_ID, EMAIL, HIRE_DATE, JOB_ID)

  11 VALUES (: NEW.) (I) TIME. LAST_NAME,: NEW. (I) TIME. E-MAIL: NEW. (I) TIME. HIRE_DATE,: NEW. (I) TIME. JOB_ID,

  12: NEW. (I) TIME. DEPARTMENT_ID);

  13 END OF LOOP;

  14 END;

  15.

  WARNING: Trigger created with compilation errors

  SQL > show err

  Errors for the HR of the TRIGGER. IO_BIFER_DEPT_EMP_VIEW:

  LINE/COL ERROR

  -------- -------------------------------------------------

  8/71 PLS-00302: component 'HIRE_DATE' must be declared

  8/70 PL/SQL: ORA-00904: invalid identifier

  7/8 PL/SQL: statement ignored

  What is the error here, I'm not bale to understand.

  Help, please

  Thank you

  You have a typo in the definition of the type:

  CREATE TYPE employee_type AS OBJECT)

  VARCHAR2 (25) LAST_NAME,.

  E-MAIL VARCHAR2 (25).

  HIRE_DAE DATE,

  JOB_ID VARCHAR2 (10))

  Then correct the type definition or use: NEW. (I) TIME. HIRE_DAE in relaxation.

  SY.

• Trigger error - Table or view does not exist

  Hello

  I imported a dump of the database of Oracle 9i to Oracle 11 GR 2. Everything works fine, but I'm unable to compile the two triggers. Relaxation is provided in:

  {code}

  create or replace trigger tm_daily_activity_t_bf_update before update on tm_daily_activity_t start_t

  for each line

  Declare

  Time_now DATE;

  Varchar2 (40) Terminal.

  name VARCHAR2 (255);

  v_program VARCHAR2 (255);

  Start

  Time_now: = SYSDATE;

  Terminal: = USERENV ('TERMINAL');

  Select e-mail in the name of tm_employee_t where COID_ID0 =: OLD. EMPLOYEE_OBJ_ID0;

  Select the program from v_program v$ session;

  insert into tm_daily_activity_t_log values (: OLD.) START_T,: OLD. EMPLOYEE_OBJ_ID0,: OLD. ROWID,: OLD. CREATED_T, SYSDATE, TERMINAL, NAME, v_program);

  end;

  {/ code}

  {code}

  create or replace trigger tm_daily_activity_t_af_update after update on tm_daily_activity_t start_t

  for each line

  Declare

  v_program VARCHAR2 (255);

  Start

  Select the program in session v_program $ v where sid = (select distinct sid of sys.v$ mystat);

  If upper (v_program) = "TOAD. EXE' or upper (v_program) = ' SQLPLUSW. EXE' or upper (v_program) = ' SQLPLUS. EXE' or upper (v_program) = ' SQLPLUS @ "then

  raise_application_error (-20001, 'validation of completed trigger', true);

  end if;

  end;

  {/ code}

  Both triggers gave error ora-00942 table v$ session, but if I execute a select statement outside triggers it works fine.

  Any ideas what the permission is required?

  Privileges through roles do not apply to procedures, functions, or triggers. Try to connect SYS and giving a direct grant to select users for example

  Grant select on v_$ user session;

• Database trigger error

  Hello
  Version 10204
  
  I have a 3rd party application that do the following steps:
  1. create an empty table on the fly with the name of dynamics that change.
  2. fill in the table with the records
  3. create an INDEX on the table
  4 collect statistics on the INDEX
  
  As you can see because there are no statistics on the oracle of the table uses dynamic sampling.
  
  I would like to get the index and then creating using DB TRIGGER to create statistics on the table.
  
  I started to write the following trigger and get an error as follows:
  
  

   
  SQL> CREATE OR REPLACE TRIGGER SYSTEM.UNICA_STATS 
    2  after create 
    3  ON DATABASE 
    4  DECLARE 
    5  p_host VARCHAR2(512); 
    6  sql_text ora_name_list_t; 
    7  stmt VARCHAR2(2000); 
    8  n number; 
    9  BEGIN 
  10     n := ora_sql_txt(sql_text); 
  11     FOR i IN 1..n LOOP 
  12       stmt := stmt || sql_text(i); 
  13     END LOOP; 
  14         IF (ora_sysevent='CREATE'  and upper(stmt) like '%CREATE INDEX UAC_%' ) THEN 
  15             declare 
  16                v_tab_name  varchar2(50); 
  17             begin 
  18             SELECT TABLE_NAME 
  19             into v_tab_name 
  20             FROM   DBA_INDEXES 
  21             WHERE OWNER = 'CM' 
  22             AND   INDEX_NAME =ora_dict_obj_name; 
  23    --         DBMS_OUTPUT.PUT_LINE('V_TAB_NAME='||V_TAB_NEME); 
  24             RAISE_APPLICATION_ERROR(-20000, 'rAISED BY YOAV!'); 
  25             end; 
  26         END IF; 
  27  END; 
  28  / 
  
  Warning: Trigger created with compilation errors. 
  
  SQL> sho err 
  Errors for TRIGGER SYSTEM.UNICA_STATS: 
  
  LINE/COL ERROR 
  -------- ----------------------------------------------------------------- 
  15/12    PL/SQL: SQL Statement ignored 
  17/19    PL/SQL: ORA-00942: table or view does not exist 

  But:
  

   
  SQL> SELECT TABLE_NAME 
    2  FROM   DBA_INDEXES 
    3  WHERE OWNER = 'CM' 
    4  and rownum=1; 
  
  TABLE_NAME 
  ------------------------------ 
  UNC_ACCLEAN_FCHID_FAILS 

  Any advice?
  
  Thank you

  Solomon-

  Excellent point. I was copying just that of the original poster and I did not stop even to think about it.

  Justin

• Trigger error temporal database

  6 C] create a tblemp_appntc table, which stores the account number, name and
  tell me valid time, (dates of Recruiment and retirement).
  Create a trigger for a valid time check that no two the same employee records have
  common employment period and does not allow the user to update the records.
  Trigger should also fill the empty retirement date.
  ______________________________________
  Create Table tblempappntc to bom4: -.
  ______________________________________
  
  SQL > connect hr/tiger@bom4;
  Connected.
  
  SQL > create table tblemp_appntc
  () 2
  3 acc_no number (8).
  4 acc_name varchar2 (20).
  date of recruit_date 5.
  date of retire_date 6
  (7);
  
  Table created.
  
  
  SQL > create trigger trig_insup_niket
  2 before insert or update on tblemp_appntc
  3 for each line
  4 start
  5 insert then
  6 if(:new.recruit_date=:old.recruit_date) then
  7 raise_application_error (-210000, 'failed to add record');
  8 other
  9 if(:new.retire_date=:old.recruit_date) then
  10 raise_apllication_error (-220000, 'failed to add record');
  11 other
  12 dbms_output.put_line ("' record added successfully");
  13 end if;
  14 if (: new .acc_no is null) then
  15 update tblemp_appntc set acc_no = 60;
  16 ElseIf (: new .acc_name is null) then
  17 update tblemp_appntc set acc
  18 _name = 'comments ';
  19 ElseIf (: new .recruit_date is null) then
  20 update tblemp_appntc set recruit_date = March 12, 2010;
  21 ElseIf (: new .retire_date is null) then
  22 update tblemp_appntc set retire_date = 23-May-3010 ";
  23 else
  24 dbms_output.put_line ('update is not necessary');
  25 end if;
  26 end if;
  27 if the update then
  28 if(:old.acc_no!=:new.acc_no) then
  29 raise_application_error (-230000,' record cannot be updated');
  30 if(:old.acc_name!=:new.acc_name) else then
  31 raise_application_error (-240000,' record cannot be updated');
  32 if(:old.recruit_date!=:new.recruit_date) else then
  raise_application_error 33 (-250000, 'record cannot be updated');
  34 if(:old.retire_date!=:new.retire_date) else then
  35 raise_application_error (-260000,' record cannot be updated');
  36 on the other
  37 dbms_output.put_line ('record updated successfully');
  38 end if;
  39 end if;
  end 40;
  41.
  
  WARNING: Trigger created with compilation errors.
  
  SQL > show errors;
  Errors for TRIG_INSUP_NIKET TRIGGER:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  14/5 PL/SQL: statement ignored
  14/34 PL/SQL: ORA-00911: invalid character
  37/4 PLS-00103: encountered the symbol ";" when expecting one of the
  Next:
  If

  you have

  else if
  

  that starts a new one IF... THEN... END IF construction... you are missing a lot of END IF

  or use

  ELSIF
  

  This

  recruit_date='12-Mar-2010'
  

  you update a date with a string column...

• Query does not allow for good compilation of trigger

  I move some tables to test on my PC (ms access) to a server (oracle). Instead of typing these in hand in SQL * PLUS, I used CFQUERY to create my fields of data and tables. As Oracle requires a sequence and a trigger to reproduce the AutoNumber function, I also used CFQUERY to create triggers and sequences. The table and the sequence work very well. The trigger is my problem. When I use the code below and then try to insert a record into the table, I get an error: "MIKETEST_TRG is not valid and does not re-validation". If I go back and retype the creation of trigger through SQL * PLUS, everything works fine. I guess it has something to do with the compilation of the trigger and the slash at the end of my query below.
  
  Looking for suggestions how to fix or other means to recreate my access on my server oracle tables. Thanks in advance.
  
  < cfquery name = "crΘer" datasource = "datadrill_custom" >
  create or replace trigger miketest_trg
  Before Insert on miketest
  for each line
  Start
  Select miketest_seq.nextval in: double new.project_id;
  end;
  /
  < / cfquery >
  

  I've seen this before when you try to create triggers or still run anonymous PL/SQL blocks. The bad news is that it inserts the characters corrupt after each line. The good news is that you can get this by placing your set create statement "inline", i.e. all on one line, without line breaks. I just tested this with MX 7 and Oracle 9i and it worked. (Oh and leave the rear / as for SQL more.)

  Phil

• FPGA timing when compiling PID loop error

  Hello.

  I'm using Labview 2011 card FPGA PCI-7833R.

  My problem is that whenever I try to integrate FPGA designed screws in my code, I get an error of timing.  See the photos displayed below.

  In this case, I have an express VI PID which I use in a used while loop (not even timed!) in my FPGA code, but when compiling, I get an error saying that the possible maximum clock frequency is the 43 MHz.

  I have a lot of loops, a few running at 80 MHz.  Is there a way to slow down a specific while loop, so that it runs at 40 MHz and not 80 MHz, as others?  The compiler does not seem to meet the simple addition of a timer loop...

  Thank you

  Orel.

  PS the same thing happens when I try to add a lowpass filter VI of the FPGA code.

  Is it possible that you set the level above 80 Mhz clock?  This is what it looks like to me.  In Explorer, right click on the FPGA target, select Properties, then go to the category "first level clock.

• DAQmx Trigger: Error 2200077

  Hello

  I am trying to create a program to trigger a hammer signal, using a USB-6211 card and 4 analog inputs (via 1 DAQmx create channel HAVE voltage to the hammer and 3 others at the exit of the accelerometer). Having as a basis for some examples of LabView as "Acq Cont & voltage chart ' and 'Impact Test (DAQmx) [.vi SVXMPL_Impact Test (DAQmx)]', I built my program, but it does not work.

  If I don't put the relaxation and the task to start, my programme without any problem (in this case I use 4 DAQmx create channel HAVE tension, a DAQ Timing, linked to the DAQmx Read located on the loop). But when I add the trigger (start analog Edge) out of the loop, so that between the time the DAQmx Read, error-200077 apears and DAQmx. This same error apears too when I try to run the sample of "Cont Acq & voltage graph" (even if I change the sample rate and the number of samples, the error is still the same). The error-200431 apears when I try to launch the second example ("Impact Test (DAQmx) [SVXMPL_Impact Test (DAQmx) .vi]), but in this case probably the DAQ card is not suitable to run this program.

  When I add a task to start before the loop (where is located the DAQmx Read function) on my program without the shutter button, the error-200278 appears. And if I add the trigger and Start Task, just the apperas-200077 error function. However, the startup task is not bothering me as much as the trigger, because when I do not use the trigger on the example "Acq Cont & chart tension" and the task of beginning is always there, this program runs normally. In this case the problem is probably on my prgram and not on my data acquisition card.

  I just want to know if my card cannot run this trigger function (early analog Edge) or if there is something else, because it's strange how a relatively simple example can be run using my data acquisition card.

  Thank you

  Hi, FCB,.

  The USB-6211 can only be released digitally.

  The attached document allows you to see the specifications of your card:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/203224

• Reference with 6215 trigger: error 200452

  I am trying to create a trigger for reference to the analog inputs of sample. However, I get the following error:

  Error DAQmxBase-200452: specified property is not supported by the device or is not applicable to the task.

  And here is the code (which is actually from one of the sample codes)

  .

  Trip parameters
  Char [] triggerSource = ' / PFI0/Dev1;
  uInt32 triggerSlope = DAQmx_Val_RisingSlope;
  uInt32 triggerSamples = 100;
  .

  .

  .

  DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,));
  DAQmxErrChk (DAQmxBaseCfgSampClkTiming (taskHandle, clockSource, sampleRate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, samplesPerChan));

  DAQmxErrChk (DAQmxBaseCfgDigEdgeRefTrig (triggerSource, triggerSlope, taskHandle, triggerSamples));

  DAQmxErrChk (DAQmxBaseStartTask (taskHandle));
  DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,));

  printf ("%d samples\n achievements", pointsRead);

  Print only the first 10 points
  for (i = 0; i< 10;="">
  printf ("data [%d] = %f\n", i, data [i] ");

  Reference trigger not taken the 6215? I m using the following:

  OpenSuse 11.2

  MX NI DAQ base 3.4.0

  LabVIEW 10.0

  I m basically just make use of the C API in my own program and do not use other software to configure the DAQ.

  Unfortunately, reference trigger is only supported in DAQmx Base 3.4 for the PCI, PCIe, PXI M Series (see the DAQmx Base 3.4 readme file).

  A possible solution would be to sample lines HAVE continuously and implement the reference trigger yourself in the software.

  Best regards

• FPGA compilation I get error &amp; quot; ERROR: ConstraintSystem:58 &amp; quot;

  I use the Xilinx LogiCore IP generator for generating DSP IP for my FPGA.

  The problem is that the names of the generated components are for a long time.

  On the Web site or http://digital.ni.com/public.nsf/allkb/F810E4289A420FE68625796600764C66

  He described a problem very similar to what I have ID issue 309260 "compilation error (ERROR: ConstraintSystem:58) when compiling a LabVIEW FPGA VI which contains a generated from a DSP graph VI.»

  I followed the suggestions and changed my IP to names such as 'A' and 'B '. As a first step, that it did not work, only to spend the entire project to another shorter path of directory did this job.

  Now, when I regenerate the IP address of 'Tools' > 'FPGA Modules' > "Regenerate the node IP" this will rename my IP with an additional random name at the end. So, if I look in my case not only that I have "A.vhd" but now, I'm also having 'A_F27AB4F7464E508DCCB219B2C4271B18.vhd '.

  It's very repetitive, and you should be able to replicate that.

  It's havoc with our software and with our software process control tool. Our database of software can accommodate only names of files of a certain length, and this violates. Also, I now have files with the exact same content but with different names.

  Do you have a fix for this problem as stated on your website?

  Kind regards

  I ended up using LogiCore externally. If you do a search in your LabVIEW FPGA tools folder, you should find "\Xilinx12_4\ISE\bin\nt\coregen.exe" (in the case of the specific version of Xilinx tools you have), it's the Xilinx Logicore exe without the National Instruments candy wrapper.

  I created all of my external LogicCore to LabVIEW (it actually makes life easer, the LogicCore tool has a better Manager to track all your IP LogicCore in any case) and then used the IP LabVIEW nodes to access the intellectual property.

  This has prevented the long names, and now I can better handle the INVESTIGATION period because I can put the code in a folder I want without breaking of LabVIEW.

  -good luck

• Compiler in Eclipse error

  Hello

  I use Eclipse 3.4 with BlackBerry JDE installed with 4.7 components.

  I try to run a sample application and built / compile without error when I right click on the project and select "Build."  However, when I right click on the project and select run as--> BlackBerry Simulator, a new error appears in the part of 'Problems' which prevents the application from running:

  The path location type Resource Description
  Error! : error: failed java compiler: javac - 1.3 source-target 1.3 - g - O-d C:\DOCUME~1\asleson\LOCALS~1\Temp\rapc_447d336b.dir - bootcla... phonegap line 0 BlackBerry Java problem

  It's sort of strange compilation error and I don't know what to do.  Is there a configuration of JDK Miss or something like that?

  Thank you!!!

  Try to clean the project before launching the Simulator (project-> Clean).

  In a small note: when you select 'Build' Eclipse builds the project, but it is not compiled for BlackBerry. For the BlackBerry you... Heck, I don't remember. I've always used shortcuts. The abbreviation 'compile for BlackBerry' is ALT - B.

  When you run the simulator it automatically compiles your project for BlackBerry.

• Compilation of the error using payment service.

  I took this documentation, but they do not compile in the PRC.  Someone else you have cascading payment service?

  Hello

  #include will fix this error.