Compiled VI do not keep the environmental parameters from code development

Similar Questions

• Script to keep the monitoring parameters of VM to 'Disable '.

  I'm looking for a way to create a script to keep the monitoring parameters of VM to 'Disable '. Here's my question:

  
  Symantec ApplicationHA requires that the 'Follow-up of the VM' option under VMware HA fixed "VM and Application monitoring. If I set this parameter as already said, all the virtual machines in the cluster gets 'Use the parameters of Cluster' and they are part of the surveillance with risk of unexpected VM resets. So I'm going to select 'Disable' for all virtual machines leaving only a couple of VMs who must actually followed even with a reset the virtual machine.

  Challenge
  

  1. How to get this applies with a script. There are hundreds of virtual machines, I need to adjust the monitoring to disable.
  2. Virtual machines continue to add to the cluster and they get 'use the Cluster setting' default and someone had to keep track of these and follow up on "Disable" the value manually.

  I want to know if there is a way, it can be script to change the setting "VM Monitoring" to "Disable" as well as the new creation of VM.

  Thanks in advance for your help.

  

  Hello, vSphereUser7-

  Mhmm... And updated two values I mentioned that you should use in your environment?

  0) the name of the folder that contains the virtual machines to keep tracking enabled on

  (1) the name of the cluster whose update settings

  And, looking at the code, it would have a degree more to add in the DasSettings of the specification of the config.  This will only act on the virtual machines for which the settings of the virtual machine for monitoring have been changed in the HA cluster settings, I see.  So, it can act on all the virtual machines you want.

  I saw your other thread at http://communities.vmware.com/message/1858996#1858996, where refer you to the post of Damian Karlson on the (http://damiankarlson.com/2011/01/13/managing-vmware-has-vm-monitoring-powercli/).  Method of Damian to disable monitoring on a VM would be a nice way to do it.  In developing his technique and performing the config for multiple virtual machines, you could do it like:

  $strMyClusterName = "myCluster"## get the .NET View object of the cluster, with a couple of choice properties$viewMyCluster = Get-View -ViewType ClusterComputeResource -Property Name, Configuration.DasVmConfig -Filter @{"Name" = "^${strMyClusterName}$"}
  
  ## make a standard VmSettings object$dasVmSettings = New-Object VMware.Vim.ClusterDasVmSettings -Property @{    vmToolsMonitoringSettings = New-Object VMware.Vim.ClusterVmToolsMonitoringSettings -Property @{        enabled = $false        vmMonitoring = "vmMonitoringDisabled"        clusterSettings = $false    } ## end new-object} ## end new-object
  
  ## create a new ClusterConfigSpec object with which to reconfig the cluster$oClusterConfigSpec = New-Object VMware.Vim.ClusterConfigSpec## for each VM View, add a DasVmConfigSpec to the ClusterConfigSpec objectGet-View -ViewType VirtualMachine -Property Name -SearchRoot $viewMyCluster.MoRef | %{    $viewThisVM = $_    ## the operation for this particular DasVmConfigSpec; if a spec already exists for the cluster for this VM, "edit" it, else, "add" it    $strOperationForThisVM = if ($viewMyCluster.Configuration.DasVmConfig | ?{($_.Key -eq $viewThisVM.MoRef)}) {"edit"} else {"add"}    $oClusterConfigSpec.DasVmConfigSpec += New-Object VMware.Vim.ClusterDasVmConfigSpec -Property @{        operation = $strOperationForThisVM     ## set the operation to "edit" or "add"        info = New-Object VMware.Vim.ClusterDasVmConfigInfo -Property @{            key = [VMware.Vim.ManagedObjectReference]$viewThisVM.MoRef            dasSettings = $dasVmSettings        } ## end new-object    } ## end new-object} ## end foreach-object
  
  ## reconfigure the cluster with the given ClusterConfigSpec for all of the VMs$viewMyCluster.ReconfigureCluster_Task($oClusterConfigSpec, $true)
  

  I simplified the creation of an object a little and added specifications of configuration of computers all virtual config spec a single cluster, so that just ReconfigureCluster() only once.

  It is important to note that the specifications being created to update the monitoring parameters given VM can have a type of operation of 'Add' or 'change '.  If we changed the parameter a VM in the HA settings for the cluster, it creates an Configuration.DasVmConfig object for this virtual machine.  The functioning of these virtual machines must be 'Edit '.  Otherwise, you have to 'Add '.  See the commented line in the code that deals with this topic.

  If you do not have that correct property creating the specification, you will get an error (in the vSphere client) as the cluster reconfig task tries to complete: "specified parameter was not correct."

  Copy the following code disables tracing for all the virtual machines in the given cluster (adjust the name of cluster variable before you run).  You could exclude the virtual machines that you want to continue to follow (or change in the GUI at will), or run a similar code to allow follow-up again for desire, VMs, or...

  How does do for you?

• With multi tabs open I'm going to close Firefox 5.0 and it will not keep the tabs closes all tabs

  With multi tabs open I'm going to close Firefox 5.0 and it will not keep the tabs it closes all tabs so when I restart I have to reopen the tabs. I was using firefox 3.6 and had the opportunity to close, but keep the tabs so they would open when I restarted firefox.

  upgrade your browser Firefox 8 and check

  • getfirefox.com

• hp7410 does not keep the wireless connection

  hp7410 all-in-one does not keep the wireless connection. It requires to install a new driwer. so far, I have at least 16 versions of the driver. neither maintains the status of line long enough fo more than a few hours.

  Please provide the following information if anyone can help including:

  The printer model - done

  Detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Method - USB, LAN, Wireless cable connection? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -

• Illustrator does not keep the specified color!

  Hello
  Illustrator does not keep the specified color!
  I have a form, I give him the characteristics of color...
  random example: 15, 55, 65,15 (CMYK)

  Once deselected, the shape takes a similar color and base of to forget my color!

  I've encountered the problem and don't know how I had done to get!...

  If anyone has an idea, thanks in advance

  Esteban,

  If your document is in file > color Mode > color RGB, your CMYK values will get confused upward (literally).

  Work with CMYK colors always use CMYK color mode.

• Hi, I have adobe (downloaded) 12 for windows pc elements 7, but want to transfer on mac (not not keeping the pc). How?, please.

  Hi, I have adobe (downloaded) 12 for windows pc elements 7, but want to transfer on mac (not not keeping the pc). How?, please.

  Download the Mac version and use your serial number to acrivate it.  As long as your license is mulriplatform it should work.

  PES 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

• Dreamweaver does not keep the fonts that I copy of MS Word

  Yesterday I was copy of a MS Word document that uses Ariel Black & Ariel and paste it into Dreamweaver.
  Which was working fine yesterday.
  
  But today, Dreamweaver does not keep the police but substituted another font (probably both).
  
  I have no settings changes in Dreamweaver that could cause this.
  
  Anyone knows what could happen?

  Go in Edition > Preferences, then click on "copy and paste" on the left. Tick the fourth option button that includes all formatting with styles.

  Remember, however, that it creates ugly source code. The best practice would be to stick as 'text only' and then apply your layout via CSS in Dreamweaver. If you're not affected by what's under the hood of your Web site, don't sweat it - stick away and be done with it.

• Firefox could not download the search plugin from

  I installed Firefox 24.0 recently and I am trying to install open www.youtube.com youtube Search Engine by clicking on Add "YouTube Video Search" in the search bar, but I get the following error message:

  Download error
  Firefox could not download the search plugin from:
  http://www.YouTube.com/OpenSearch?locale=en_GB

  What is a Firefox problem, or a youtube error?

  Thank you for your response.

  I don't want to install addon for youtube search. I just wanted to know if I can install the search engine for youtube as before.

  After a few readings on the internet I found that the search engine is described by a small XML file which is available through a link on the page. All other pages with operation generates the search engines like Wikipedia or IMDb content is XML refers to XML file. But the link to youtube opensearch descriptor points to an opensearch.osdx file.

  I don't know if it's the extension, or if he did not support tag inside but Firefox is not prepared to handle it and add youtube to search engines.

  I found this page: http://www.tobtu.com/customsearch.php I copied the relevant tags in the fields of seizure and added YouTube video Srearch. Now, it works fine.

  But the question remains: is it Firefox that can not handle the descriptor of opensearch sandard of youtube or youtube.com which provides a defective descriptor?

• I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

  I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

  Hello

  The question you have posted is related to Microsoft MapPoint and would be best suited to:

  Technical support of Microsoft MapPoint

  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway

  http://support.Microsoft.com/ph/851

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  See the faq for the compatibility of ACR:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Your camera would need ACR version 9 which is not supported by 12 elements.

  You can:

  -upgrade to 13 items, with updates of version 13.1.1

  - or use the free DNGconverter mentionned in the links at the bottom of this faq. You'll be able set of entire folders to convert your raw files to DNG PSE12 can read and modify.

• All new Iphone 6s do not keep the load.

  I bought the new IPhone 6 s today two weeks ago. I'll have to charge at least twice per day, within a period of 10 hours. I was told when buying I could get 17 to 24 hours autonomy. I'm not running several apps and do not keep a bright screen.  How can this be repaired?

  Before he can be 'fixed', the question must be identified. Go to settings > farm and see which application uses the highest percentage of your battery. You will also need to look at this other parameters you turned on and determine how you use the device.

• Illustrator does not keep the fonts when recording to SVG

  Dear Adobe community,

  I want to create my images with the Arial font; However, when I save the document in SVG, it changes in Times New Roman.

  Arial is widely used, so do not see why this happens by default.

  Thank you Dear!

  Andreas

  What are you doing exactly?

  Record to the SVG format and then reopened in Illustrator?

  This isn't a good idea.

  If you want to continue editing: save it as AI

  When you export the final file: export to SVG, the relevant parameters.

• plugin.expose_full_path will not keep the value "false".

  I am able to change the value of the "true" to "false", but it will not retain the value 'false' to restart Firefox.

  All my plugins and extensions are uptodate. I use XP Home, also updated.

  You can check for problems with preferences and try to rename or delete the file prefs.js and possible prefs - numbered # .js and a user.js file possible to restore the values all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences