Complete restoration

Similar Questions

• I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is an error__ of cryptographic

  I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is a cryptographic error

  Any ideas?

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer was accidentally arrested during a complete restoration of the system to the factory settings. Help!

  OK, so I did a complete system restore to my netbook in its factory settings. Everything went well until I'm gone, and I find that the computer has been stopped during the restoration of the system. I turned it on and it loads and then displays the screen that says

  "Setup prepares your computer frst use."

  but after about 2 seconds this screen a pop up comes and says:

  "The computer shut down unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, n then restart the installation. »

  Well I click OK and I have let it restart but then he did the same EXACT thing each time only. Please help me find a soloution because I can't my school without her wok!

  Start the full system restore process to repair what has been damaged
  on the first attempt.
   
  "hillcon2" wrote in message
  News: * e-mail address is removed from the privacy... *
  OK, so I did a complete system restore to my netbook in its plant
  Parameters. Everything went well until I left and I find the computer
  has been closed during the restoration of the system. I turned it on and it loads up and
  then displays the screen that says
  "Setup prepares your computer frst use."
  but after about 2 seconds this screen a pop up comes and says:
  "The computer shut down unexpectedly or encountered an unexpected error." Windows
  installation cannot continue. To install Windows, click OK to restart the
  computer, n then restart the installation. »
  Well I click OK and I have let it restart but then he did EXACTLY the same thing
  every time. Please help me find a soloution because I just can't get with my
  wok to school without her!
   
   

• Complete restoration or recovery Simple for SQL 2005

  Hello

  "What is involved when the database is set to the restoration complete (default) If no backup is made to the database and that involvement when it comes to the recovery of the database between 'full recovery mode' or simple recovery.

  Thank you

  Mike laid out this one. I guess that's for the virtual Center, whose loss of data is usually not a problem... If it's for something else, I would think long and seriously not one-way. Databases more need so much recovery you can get, where the majority of their data is not performance data, or something superfluous.

• I can do is no longer a complete restore to an earlier date. I tried the solution proposed by joelj1964, but to no avail.__Has, someone at - it any other ideas?

  Afer, try a restore and the system goes through the steps, I get a screen that Simon "your computer could not be restored to an earlier date and no files have been modified.

  Hi wetmartinia,

  1. do you have security software installed on the computer?

  2. did you of recent changes on the computer?

  3. you receive an error with the message code?

  Method 1

  In many cases software security installed on your computer may interfere with the process of restoration of the system on the computer.

  I suggest that you disable the security software on the computer and then perform the system restore, check if it works.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Also see the Microsoft article below.

  How a software antivirus and system restore work together

  http://support.Microsoft.com/kb/831829

  Method 2

  If the previous step fails, then view the event logs to investigate System Restore service errors, post back with the details.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to completely restore my computer?

  Original title: I just got a HP Pavilion Entertainment PC and when I turn it on it crashes immediately. I don't know how to erase the drive hard to from there. How do restore you to the factory settings?

  How to restore from there if the computer is just empty?

  Hi Matt,

  You must contact the HP support for further assistance on performing a factory restore.

  HP support.

• Do I need the disk to completely restore my laptop?

  Hey there,

  I am wanting to restore fully my laptop so it's like using it for the first time again.

  Do I need a disk to do this because I don't have a drive with him and my product key is on a sticker on the bottom of the laptop.

  Please answer if you know it.

  Thank you

  Kim.

  PS; My laptop is a Toshiba Satellite A100 - 02 k.

  Contact the Technical Support of Toshiba http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp or http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact and see if you have a recovery Partition.  If so, it would be possible to do the restore from there (using a special keyboard command) or can be used to create a set of recovery disks.  He shouldn't tallk to them though, as it's their recovery process and non-Microsoft.  If you have no recovery or disk partition, ask Toshiba to buy a set of recovery disc (usually for a small fee).  I looked but could not find them, but they are probably still available, but just not listed on the site.  Don't forget to backup your data this process erases the hard drive clean at ALL.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• complete restoration for packard bell

  Hi there at - he someone who can help, I recently had problems with a packard bell laptop computer he was going on a black screen after I logged it stayed on this black screen for at least 15 minutes, so decided to do a full restore back to factory settings, now when I put my cd master to reeboot it brings up a dialog box with alott of boxes and programs. when I tick the box and he asks me to validate the code why is it, I had no problem when I did in the past, the computer was runing on vista sp2.
  any help would be grateful
  i.p

  http://support.PackardBell.com/UK/

  For any problem with the software/recovery process, contact Packard Bell.

  It is their software/recovery process, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• T60: do complete restore of the system. Download blue screen on disc 2 of 5.

  Hello

  I have a thinkpad T60 notebook. It is a type of 1953.

  I do a full system restore, using the "rescue and recovery CD" and the recovery of 5 CD.

  When I'm on disc 2 of 5, I get the blue screen.

  The blue screen says:

  "A problem has been detected and Windows has shut down to prevent damage to your computer. A process or thread crucial to system operation has unexpectedly left or came to an end.

  ...

  Information techiical:

  STOP: 0X000000F4 (0X8A102CA0, 0X9A102E14, 0 X 0000003, 0X805237A8)

  "

  I tried 3 times with the same error messages and the result in blue screen, the recovery process.

  Could you please let me know what I need to do to perform a successful recovery?

  Thank you very much

  The turbine BP is normal. You don't have this port, unless you're addicted to a dock. Looks like your hard drive is dead. Is what brand?

• Complete restoration of the Server 2008 R2 vmware workstation for windows backup image 9

  9 workstation.

  I am trying to restore a backup of windows server r2 2008 (made with the built-in windows backup) on an existing installation of vmware server 2008 r2. Basically, I just want to replace the facility with the backup version.

  The problem is, the windows to the backup image is on a USB key.

  The restore process is:

  1. Connect the usb host drive
  2. Insert the windows server r2 DVD in drive
  3. initialize the Server 2008 r2 comments and press the button ESC at startup, then boot from the CD
  4. Select 'repair' installation
  5. but here's the problem, windows backup image is on my USB, but at this stage I do not see the USB key from the client in the repair installation process.

  Ideas of the best way to do it?

  Thank you

  Okay, downloaded the ISO Image of Windows Server 2008 R2, created a new Virtual Machine, added the Windows Server backup and made a full backup without the destination for the backup drive, a USB Flash drive.

  Started the virtual machine of the ISO Image and it does not see the backup from a USB Flash drive, although I can see it from the command prompt.

  Also created a record gross hard pointing to the USB Flash drive and started the virtual machine of the ISO Image and he does not see the backup of the hard disk gross of the Flash USB drive, because the Virtual Machine had problems during the boot process.  Forget the exact error message, but I tried as a whole disk and a partition.  So the why I tested it by copying it to a normal file depending on the disc hard virtual (and worked).

  Finally I created a regular file based hard and copied the backup folder of the USB Flash it and then started the virtual machine drive of the ISO Image and it had no problem see the backup from the normal file based hard.

  It seems that you have to take the long way around, but at least, you should be able to see!

  I know not when booting from the ISO Image or a disc of Windows Server 2008 R2, backup tools command line are available to restore the image however you could examine the issue.  I would like to but I just don't have the time at the moment.

  Post edited by: WoodyZ - modified comment re: Raw Disk

• Complete restoration of old backup database.

  How can I restore database (9i) using old full backup? I want to do this because my redo log group (current) broke down and the database cannot be opened, his mount in State.
  
  RMAN details
  -No used catalog
  
  RMAN > show all.
  
  RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 2 DAYS WINDOW;
  CONFIGURE BACKUP OPTIMIZATION
  SET UP DEFAULT DISK DEVICE TYPE;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT for DEVICE TYPE DISK TO ' / backup/rman-backup/cf%F';
  SET UP THE DEVICE TYPE DISK PARALLELISM 2;
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' / backup/rman-backup/ora_df%t_s%s_s%p';
  RMAN configuration has not stored or default settings
  CONFIGURE MAXSETSIZE TO UNLIMITED;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / backup/rman-backup/snapcf_PROD.f';
  
  I ran BACKUP DUPLICATION and REMOVE OBSOLETE.
  
  
  "Backup from the list" gives the latest backup games. I deleted all the games of the last backup of ' / rman backup/backup /' and copied all the full backup old value for ' / rman backup/backup /'. It looks like RMAN is aware of the last backup and not the old full backup files which I copied ' / rman backup/backup /'.
  
  RMAN > restore validate the database.
  
  From restoration to May 24, 10
  
  using channel ORA_DISK_1
  using the ORA_DISK_2 channel
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 24/05/2010 17:50:19
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 419 found to restore

  Hi rajkum,

  In 9i, you don't have the ability to backup backupset catalog.
  You must restore a created with the controlfile autobackup controlfile right after that "the old full backup set" was created.

  This controlfile will contain the necessary backup game info, so you can perform the restore.

  Kind regards

  Tycho

• I have a problem loading with my iPad Air2.  I used other cables and Chargers but still doesn't load.  I plugged the iPad to iTunes and a DFU after he took a few hours that the iPad has been completely restored and apps reloaded.  In addition to the

  My iPad will not normally charge.  I tried different cables and Chargers.  I plugged the iPad to iTunes and reset a DFU.  After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally.  Any help out there?

  There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:

  1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.

  2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• I used download exec to install for FF & save on USB key to reinstall after a complete system restore last one I have is FF12 can do with FF27 or even 26?

  I'm used to be able to download the exec of set-up for FF and save it on a USB key to reinstall offline after a complete restore of the system. This is very useful. The last one I have is FF12, so after a restore, I now install FF12 so I can take care of tasks offline restore without having to resort to IE. When I go online I go from FF12 to the latest version. Is there a way I can save the exec of set-up for FF27 or even 26?

  Hello, you can download the offline full installer for your system https://www.mozilla.org/firefox/all/

• Complete PC Restore 0 x 80042406

  Error 0 x 80042406 said complete PC Restore a data disc is set to active in the BIOS.  Set another drive as active.

  Complete restoration of the PC detects image backup and chows new disk in drive C:.  But it does not restore on this drive. with the error message.

  I believe that the total error is...

  "Data disc is currently set as enabled in the BIOS. Set some other as active drives and use the utility DiskPart to clean the data disk, then retry the restore operation. (0 x 80042406)"

  So have you tried or the other suggestion?  (own diskpart seems to work for some...)

• I had to fully restore my HD and subsequently lost all my e.mails saved from 2013 and the beginning of this year, I can get back in a new installation of program?

  I had a major breakdown of the system on Windows 7 and had to completely restore my HD. When restored I lost TB. Successfully, I rebooted TB but have lost all my e.mails saved from 2013 as well as recorded from 2014.
  The first e-mail now in my system is time that TB has been reloaded. Saved the e.mails are important and that's why I need to know how, if possible, to retrieve messages.

  If you had an IMAP e-mail account, then all your emails are stored on the server, so install Thunderbird and create the IMAP e-mail account to display folders and emails on the server.

  If you had a POP e-mail account so all your emails have been stored on the computer and you should regularly create backups of your profile folder or at least created a backup of your profile (and any other documents / images etc. on your computer) before wiping the computer/reformatting and reinstalling OS. So, you can use the backup to reinstall the profile. If you have used MozBackup to create the *.psv file, and then reinstall MozBacktool and use it to restore the profile.

  • Backup: http://kb.mozillazine.org/Profile_backup

  If you have not created a profile backup, but backed up/saved emails as recorded on an external device .eml files, you can use this addon to restore these .eml files to the new profile.

  • https://freeshell.de//~kaosmos/mboximport-en.html