completed a factory restore complete on Vista, but it keeps failing after applied updates

I did the following in the following order

restored to factory settings, Vista

uninstalled mcafee (30 day trial)

Installed AVG free

reinstalled printers,

permits all updates be installed (149 of them).

installed office 2007,

everything is fine - a final update has been installed by os and when I rebooted - system stüch with a splash screen indicating "Please wait".

The implementation of the system for 24 hours - to the left, nothing has changed.

does all this twice - how I lower the question

uninstalled mcafee (30 day trial)

Installed AVG free

Remove McAfee using the Control Panel, programs and features and then running the McAfee Consumer Products Removal tool. Reset.  Then check that the system works. Then install AVG

UTC/GMT is 11:58 Tuesday, August 21, 2012

Tags: Windows

Similar Questions

  • New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

    New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

    Monastir,

    What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

    Dell-Jesse

  • Unable to install KB2570947 of ideas? I've tried many things, but it keeps failing...

    cannot install update KB2570947 of ideas? I've tried many things, but it keeps failing...

    Hi stewartmcgregor,

    1. You receive an error message when the update installs?
    2. You are able to install some other updates on the computer?
    3. Did you the latest changes on the computer?
    4. You have security software installed on the computer?

    Method 1

    I suggest that reset you the Windows Update components by default and then try to install the update.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2

    If the previous step fails then I would suggest that you manually download and install the update on the computer.

    Update security for Windows XP (KB2570947)

    http://www.Microsoft.com/download/en/details.aspx?ID=27307

    Method 3

    If the previous step fails then check the history of update to know the error message associated with the failure of the update and post back with the details.

    (a) open Windows Update by clicking Start , all programsand then click Windows Update.

    (b) in the left pane, click view update history.

    (c) to view more information about an update, double-click it.

  • Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

    The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

    Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

    Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

    Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

    Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

    How to run Checkdisk at startup CHKDSK

    http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

    Run SFC/scannow

    File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

    WHY: You want to ensure that the base operating system files have not been damaged or changed.

    How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

    http://www.Vistax64.com/tutorials/66978-system-files.html>

    04/01 / 1107:15: 20:00

  • CS6 will not update for CC, other programs have updated but CS6 keeps failing

    I've updated via help in CS6 and all programs have updated for creative cloud, but CS6 keeps failing.

    This is my original version packaged but I subscribe to CC in order to maintain updates.

    Can you please advise.

    Run the Creative Suite cleanup tool, let the AAM reinstall, try again.

    Mylenium

  • Vista Ultimate 64-bit hangs after an update

    My Vista Ultimate 64 bit can not simply restart after an update, I just restore my laptop to its default, which is a pain, thai I get when the system attempts to restart after the update, not too sure that update messages is, but States simply that "cannot start windows. A recent change in hardware or software may be the cause. To solve the problem:
    (1) Insert your windows installation, and then restart your computer
    (2) select your language and then click Next
    (3) click "repair your computer".

    At also File: \Boot\BCD
    Status: 0xc000000f

    Info: An error occurred trying to read the boot configuration data

    Please help with what the cause is and how I can fix this, broke down 3 times now, can not insert installation CD because I've never given one, laptop pre-installed with vista

    Hi enois14,

    Because you have a notebook Original Equipment Manufacturer (OEM) and you do not have an installation disc there is nothing we can do in this situation.

    The only thing I can say for now is to try to start safe mode and do a system restore.

    It uses system restore to return your system files and settings to an earlier point in time, without affecting personal files, the restore points. For more information, you can access the link below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    If you do not want to do a system restore then you may need to contact the manufacturer of the laptop to see if they have a way to access the recovery partition with shortcut keys during the startup.

    Recovery for systems pre-installed OEM options are configured by the manufacturer of the PC and can vary from one system.

    Hope this information was useful.

    Concerning

    Varun j: MICROSOFT SUPPORT

    Visit our Microsoft answers feedback Forum and let us know what you think

  • How can I only restore contacts and calendar but not the system after factory reset settings?

    Hello

    I have an iPhone 5.  I forgot the password of restrictions long ago and no backups prior to that date.  I want to do a factory reset.  How can I do this while keeping a copy of my contacts, notebooks, lists and schedules, so I can re - sync after the reset?  I don't want to re - sync system settings that my backup plays up and want to do a clean install of the main parameters.

    All advice appreciated.

    Chris

    You need to store your contacts and calendars on your computer or Cloud Computing service.

    AR you not do?

  • I have an e-mail account hotmail that I don't remember my password and I completed the form but they keep send it back? What can I do else?

    I filled out the form to help 4 - time, but given that you can no longer talk or to go to a tech support person - how are we suppose to retrieve passwords?  This account is linked to my hotmail account - but since they did an update - I can now no longer to this account.

    Hello

    Answers is a peer group supported and unfortunately has no real influence on Hotmail.

    HotMail has its own Forums, so you can ask your questions there.

    Windows Live Solution Center - HotMail - HotMail Forums Solutions
    http://windowslivehelp.com/

    Hotmail - Forums
    http://windowslivehelp.com/forums.aspx?ProductID=1

    Hotmail - Solutions
    http://windowslivehelp.com/solutions.aspx?ProductID=1

    How to contact Windows Live Hotmail Support
    http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

    Windows Live Hotmail Top issues and Support information
    http://support.Microsoft.com/kb/316659/en-us

    Error message "your account has been locked" when trying to connect
    http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

    Compromised account - access unauthorized account - how to recover your account
    http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

    Hotmail hacked? Take these steps
    http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I am running windows Vista, but continue to receive messages that updates failed to install all the updates for office... and also receive a code 646... I'd appreciate any help... Thank you

    Windows Vista Service Pack 2 for x 64-based systems (KB948465)

    Download size: 57.0 to 567,3 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    Windows Vista Service Pack 2 is an update to Windows Vista that includes all updates that have been delivered since SP1, as well as support for new types of hardware, and new hardware standards. After you install this item, you may have to restart your computer. This update is provided and authorized under the Windows Vista license terms.

    More information:
    http://support.Microsoft.com/kb/948465

    Help and Support:
    http://TechNet.Microsoft.com/en-us/Windows/dd767387.aspx

    Hi Charlie122,

    You can follow the link for a resolution for the Office updates:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

    Also consult and check if it is useful: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/bdbfd8f0-5780-488c-b15b-9be5f2d85aff

    Aziz Nadeem - Microsoft Support

  • I'm running Vista 64 on a Hp laptop. I keep trying to install updates for Windows, but it still fails after a full download etc. The error code is 8007371B. I can't find any reference to this code on the Microsoft site. __

    The error code is 8007371B.  I also have a problem with Media Player, where he can't identify a DLL so why I'm doing all the 26 updates

    0X8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE

    Run this tool:

    Description of the update of the system for Windows Vista tool
    http://support.Microsoft.com/kb/947821

    TaurArian [MVP] 2005-2010 - Update Services

  • Try to install the update Cumulative security for IE8 and Vista but eveytime it fails with WindowsUpdate_80070005 and I can't find a reference on how to overcome this error

    No other information.

    Hi Martin,

    How long have you encountered this problem?

    Error code 0 x 80070005 is also described as access denied (you may not to install updates.

    Please check that you are logged into an account with administrative privileges.

    Users have solved similar issue by following the steps indicated by the TaurArian, please see the link below for the steps
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8007005/67e5374f-7356-4542-a3b1-b1e910aea325

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

  • Vista Home Premium Reboot Loop after automatic update of Windows

    I have a Compaq Presario F700.  We have recently installed Norton, set, and automatic updates Windows automatic backup options.  I have the system restore points all.  When you try to start the system goes to the Windows Error Recovery window.  If I choose Safe mode or safe mode with networking, the system reboots automatically.  When this happens, it load all the way to my connection profile.  There are two profiles (protected by password) on the computer, but both are administrator accounts.  When I connect each profile, the computer stops and automatically restarts (constantly).  I tried to do a restore of the system from the command prompt and of the recovery tool.  I tried repairing the windows system as well.  I went into the advanced boot options and tried several of them.  Any suggestions?  What is a virus or a windows update problem?

    Hello

    You can use the solutions in this ko - 4 methods and I have listed some help for them below

    The update is not installed successfully, you receive a message, and the computer restarts
    When you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Method 1: start Windows Vista/Windows 7 with the Windows installation media, and then
    Use the repair feature

    How to do a startup repair in Vista and Windows 7
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to Access Options recovery if you
    have at their disposal, or use the DVD as described above.

    This tells you how to access the system - Vista Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    This tells you how to access the system - Windows 7 Recovery Options
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Try recovery options Startup Repair

    How to make a startup (Vista) repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    Method 2: start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    You can also do a restore of the system of starting with a disk of Vista or Windows 7.

    Method 3: use the downloads at the end of this article - note versions for Vista x 86 32 bit
    and x 64 Vista 64-bit.

    The update is not installed successfully, you receive a message, and the computer restarts
    When you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Method 4:

    At the command prompt or Recovery Options or a Vista disk boot

    Type or copy and paste these in one at a time (not press ENTER)

    c:windows\winsxs\ in the commandprompt
    Press ENTER

    DIR pending.*
    Press ENTER and you should see the pending.xml

    Ren pending.xml pending.old
    Press ENTER.

    -------------------------------------------

    It's the most complete method 4

    Use the Vista startup disk or system recovery options to rename the Pending.xml file and
    Edit the registry:

    In the System Recovery Options page, click command prompt.

    Type cd C:\windows\winsxs, and then press ENTER.

    Type ren pending.xml pending.old, and then press ENTER.

    Type regedit and press ENTER.

    Select HKEY_LOCAL_MACHINE.

    On the file menu, click on load the hive.

    Look for the following folder:

    C:\windows\system32\config\components

    When you are prompted for a name, type Offline_Components.

    In the registry editor, locate and then delete the following registry
    subkey:

    HLKM\Offline Components\AdvancedInstallersNeedResolving

    HKLM\Offline Components\PendingXmlIdentifier

    Exit the Registry Editor:

    At the command prompt, type exit to quit the registry editor.

    Press ENTER.

    Restart the system

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    Hope this helps sort it out for you.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

    I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

    The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

  • I tried to recover my chromebook, but it keeps failing.

    I followed the instructions here: https://acer.custhelp.com/app/answers/detail/a_id/27637#_ga=1.91117849.2058217069.1472158467

    I went to the site from Google and downloaded the linux script that creates bootable USB support. He passes the verification step, then fails with an "unexpected error". I looked that up on Google page recovery and it say that my media could be bad. This isn't the problem. I looked at the logs (using ) and failure occurs when flashing the rom:

    From the firmware update (/ tmp/install-mount-point/usr/sbin/chromeos-firmwareupdate - mode = recovery)
    Command: / tmp/install-mount-point/usr/sbin/chromeos-firmwareupdate - mode = recovery
    From Google_Edgar firmware updater v4 (recovery)...
    -Package updater: [Google_Edgar.7287.167.17 / EC:edgar_v1.1.3612 - 1863437]
    -Current system: [RO:Google_Edgar.7287.167.17, ACT:Google_Edgar.7287.167.17 / EC:edgar_v1.1.3611 - a9a071e]
    -Write protection: material: off, software: hand = ON EC = WE
    mode_recovery: RO + RW update
    * invoke: host of flashrom - p - fast - check - w bios.bin
    mode_recovery: update this / RO + RW
    * invoke: flashrom Pei ec - fast - check - w ec.bin
    Failure of execution (1): flashrom Pei ec - fast - check - w ec.bin
    Messages:
    Erasing and writing of flash chip... Good. It seems that nothing has changed.
    FAILED
    FlashROM v0.9.4 : 7be7ca6: 7 June 2016 18:51:52 UTC on Linux 3.18.0 - 12320-gbb6b499 (x86_64), built with libpci 3.1.10, CCG 4.9.x 20150123 (prerelease), little endian
    disable_power_management: cannot open /var/lock/flashrom_powerd.lock for writing: no such file or directory
    BYT IBASE mapping to 0xfed08000, non-aligned size 0 x 200.
    Mapping BYT SBASE 0xfed01000, non-aligned size 0 x 200.
    ERASE FAILED with 0 x 00020000! Expected = 0xff, Read = 0x43, has not the number of bytes from 0 x 00020000-0x00020fff: 0x80
    ERASE FAILURE!
    FAILED!
    Uh oh. Erase/write failed. Check if something has changed.
    Write to the flash chip apparently did nothing.
    This means that we need to add specific support for your Board of Directors, the programmer or flash memory chip.
    Report it on IRC on irc.freenode.net (channel #flashrom) or
    mail [email protected]!
    -------------------------------------------------------------------------------
    You can now reboot or simply to leave the machine on.

    It's acting like the flash program expects a single chip, but detect another.

    In any case, if this is the case, where can I get the right firmware?

    It is an Acer Chromebook 14:

    CB3-431-C5FM

    Any help would be appreciated, as it's basically just a big paperweight at this time.

    What is an answer like that? Did you read my post even? I even offered that you log on to the computer itself.

    Of course, I created the USB correctly. Do not insult my intelligence!

    It's okay, anyway, we sent the Chromebook at the Google store and return our money. :/

  • I'm trying to install windows updates, but it keeps telling me 1 update failed by citing a 66A error, what should I do about it?

    My computer has been invites me to install the new updates for the last months, so when I do there is always 2 updates that will not download on my computer and it says always that year error has occurred citing 66A, I don't know what it is but there is obviously something wrong with my computer and unfortunately im not very technical.  My computer is running very slowly so that im not sure if it is a part of the problem too?

    My computer is running very slowly so that im not sure if it is a part of the problem too?

    >

    >

    07/10 / 1102:45:05

Maybe you are looking for