compressing files with the compression tool built into windows XP and adding a password

Similar Questions

• Drawn with the pencil tool seems to fade in and out

  My Nme is Allen Togwell.Case No.: 0183721415. Your type of chat line says I need a graphics card to solve my problem for my CS6. He gave a link but disconnected before I could use it. Can you help me with what type of graphics card, I need. I am 75 years old and not very literate com.

  Thank you

  Hi Allen,.

  I looked at the file number and watched a recording of you work with the agent and I am not convinced that what you see is necessarily due to the graphics card.

  This is my interpretation and thoughts around what have seen you. I noticed that you are working on an image that took a good amount of the screen seen in the zoom of 16.7%. In other words, that it was a large enough image. Then I noticed that you use the pencil tool with a piece that was 4 pixels.

  I think that the combination of these two things was the reason for which the pencil tool appeared jerky or fade in and out when establishing. This happens because you are using such a small size and are zooming back as long as the lines are barely visible. When you zoom in her resamples program appearance. This resampling can cause detail to be lost and the appearance of vary depending on what level of zoom is used, 16.7% is particularly bad, with fine detail.

  I think that there are two solutions, use a different zoom level to get a better view or use a pencil with a larger size.

  I recorded this video for you for example

  http://screencast.com/t/e9dhiHKoKbv

  I suspect the list that the agent was suggested for video cards was at the bottom of this document

  http://helpx.Adobe.com/Photoshop/KB/Photoshop-CS6-GPU-FAQ.html

  Hope that helps,

  -Dave

• How to disconnect from the Mail application built into Windows 8 Pro

  I think that this old question / thread has been neglected (closed) and went without a good answer.

  Citing the answer of the moderator of this thread.
  "

  Hey jayRads,

  There is no concept sign in email and applications on the Preview version of consumer Messaging. If applications use the credentials you entered in your Windows profile, you will need to disconnect your account under settings of the PC users.

  -Isabelle '.
  and we know that this is not a real answer to the question.

  Since I only have a Local account signed in Windows 8... and when I click on the mail and forced me to Sign In (add account MS)... There should be a disconnect somewhere after I entered my hotmail account. Logically faulty if there is really nowhere to disconnect my hotmail. Even used Credential Manager/ne shows not my signed in accounts.

  NOTE: All I can do is to remove all accounts from the e-mail settings, but it affects all applications (Messaging, people, etc.) which usually isn't my idea of disconnection from Mail only. :(

  I want to just sign out since the Mail application (will also apply to applications that require a signature in) is possible.

  Please enlighten me in this situation.

  Thank you
  Ferdie

  Hi Ferdie Miranda,

  Thank you for choosing windows 8 and we join on our community.

  I understand from the description of the problems, you want to know the way to disconnect from the Mail application in Windows 8.

  Windows 8 Mail app has been designed so that it will keep you in connected mode all the time so that you will be able to check your e-mail without connecting to the Web-based e-mail.

  The steps in the thread you mentioned are quite correct.

  If you want to disconnect, please delete your account.

  For more information related to windows, feel free to join us anytime.

• Problem with the puppet tool

  Hi adobe community.

  I am using the trial version of adobe after effects, but I have one or two big problems with the software:

  1. If I use the puppet tool (I don't know English name) for the two points on the object the program closes!

  2. it is impossible download this plugin: C:\Program Files\Adobe\Adobe after effects CC 2015\Support (Media Core plug-ins)\Common\ImporterWindowsMedia.apm Files\

  Please help me and thanks a lot for the tips

  p.s. I have a pc with windows 10 pro

  Try CC 2014 and see if the problem persists.

  Try CC 2014 will help us see if the problem is in the latest version of AE or on your system in General.

  I have problems with the puppet tool on my Windows 7 CC 2015 machine running.

  If there is a problem with CC 2015, use CC 2014 for a little while. There is a coming update at the end of this month which aims to fix a LOT of bugs.

• How to transfer files with the ad hoc network

  I was looking for a way to transfer files between 2 PCs via ad-hoc, but I can't. Can someone help me please?

  You could try: sharing files with the public folder

  http://Windows.Microsoft.com/en-GB/Windows-Vista/sharing-files-with-the-public-folder

• How can I associate and e-mail with the snipping tool program so that I can e mail what I snip?

  I love the snipping tool program in windows 7 and I'd love to use it, but can not e mail what I cut, I need asscociate and e mail with it, guests tell me to go to default and put programs in place, but no luck. help please

  What type of program you use for email? This is an email client? Otherwise, to save the snip, open a new message window, and then attach it.

• Can ANY product Adobe CC ingest or import AVCHD (.mts) files with the metadata accompanying .xmp sidecar files?

  I had no luck with the sidecar xmp files relative in any product, including the prelude, Premiere Pro, Lightroom or bridge.

  Hi Mike,.

  Okay, I found the outline of the bug. I was initially on the assumption that the question was how the XMP was written by Daminion. This is not the case. Their XMP seems fine. The bug is with the way we are going to analyze these JVC AVCHD files. It will take some research more sort everything, but at least now I'm on the right track. I tested the creation of metadata for a variety of other files AVCHD from Canon and Sony. All these files caused first create the XMP files with the name xxx.xmp. But, when I added the metadata in the JVC, the xmp always emerged as xxx.mts.xmp file. Then... I did some more tests with the file. If the extension of the file to rename. MPG, suddenly all the XMP you added the file in Daminion appeared. All the new metadata that I created has also been added to this file.

  It seems that there is a specific bug in our file for this JVC AVCHD flavor Analyzer. I'll get this connected and see if I can get it fixed. In the meantime, you can rename the file extension. MPG, if you want to read your existing metadata. Or... you can add to the file xxx.mts.xmp.

  Insect. Thanks for the help to identify him.

  ~ Mitch

• Follow-up with the pen tool

  Hi, I am trying find an animal of comics with the pen tool.  How to start and stop without messing up the design, when you start in a new location within the design, if that makes sense.

  Thank you

  Erica

  Erica,

  To start a new path, rather than continue the current, you must pass the tool pen for something else and back again. You can do this by using the hotkeys with no mousing hand and hold the mouse and your attention (more or less) in position.

  P's Pen, the switch from the simplest is to press O and P and then you can start the new path (O is the reflection, but who is not serious in this respect).

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Adobe offers cloud the ability to share and collaborate on a PDF file, which may be increased online as for the images with the pen tool?

  Hello

  Can someone share a PDF to images so that the employee can use the pen tool to increase (x-out arrow, circle, go here) with the pen tool, online, in the cloud of Adobe Document?

  Thomas

  Hi thomasbrigantino

  You can share PDFs using Adobe Doc Cloud, but you can't supplement online and collaborate.

  However, you might find 'share of comment' feature of Acrobat interesting DC: using Acrobat | Starting a review PDF

  Kind regards

  Rahul

• How to play video files with the extension "rar".

  When I download video files with the extension 'rar', I can't play them with Windows Media Player or QuickTime.

  Could someone please advise what I can do to fix this problem?

  Thank you

  Rar is a compressed, identical to zip file. You must decompress, using an application like winzip or winrar, then according to what file type it is you should be able to play. If you cannot, you will find the codec that makes the Elf, install it, and then everything should be fine, but if you have problems, go back with the extension on the end of the file, as you have with the .rar and ask again.

• Cannot change a video Clip with the pen tool

  Hello

  I imported video and audio clips to the first, but I can't edit video clips with the pen tool. No line appears on the clip in the timeline panel. However, the audio clips are great and I can use the tool pen on those. Why no line does not appear on the video clips? How to make it stand?

  Hey Lee,

  do not understand what you mean. On video clips in the past the line seems just when I put the video files in the timeline. I don't see them now, how can I get this line back so that I can manually disappear with the pen tool?

  With the extended track, go into the settings menu to display timeline (the key) and select "See the video keyframe."

  I hope this helps.

  Thank you

  Kevin

• Import files with the extension of contact?

  I have a folder with the files with the extension ".contact" Windows recognize because it opens and displays the contact information when I double click. I'm doomed if I can find a way to import them into Thunderbird but. The option import from address book does not recognize them all when you use the following options: Outlook Express, text file, and the Vcard file. The other two options 'Eudora' and 'Prospects' are grayed out. I can't drag the contact files in Thunderbird address book either.

  I am quite confused because they are obviously contacts and it must be in a common format, or else it does not open with Explorer. If Thunderbird will not import these then I want that it was mentioned on the import menu or somewhere so that I don't have to spend an hour reading and watching tutorials that are of no use. The contacts were from another computer and saved on a new computer to replace by the Geek Squad (Best Buy).

  10 Thunderbird 45.5.1 Windows

  Thanks ago

  These .contact files are in the file c:\Users\ \Contactsusername? If so, you should see a toolbar with buttons for the new contact, New contact group, import, export etc. Click on export and choose the format CSV or vCard. For csv files, you can change in a spreadsheet for records correspond to the layout of the address book TB. Then select Tools/import... Address books... ... Text file to change the file type filter to comma-delimited (csv) and open the csv file. Then, move the input fields upwards or downwards for match TB.

  To import vCards, see this post.

• How can I open a .nrl in firefox extension, currently, it returns a text string instead of opening the file with the default program.

  When I click on a file .nrl extension (belongs to the autonomy I - manage your software) it returns a string of code (which is in the shortened link) instead of following the link and the return document. Is it possible to say Forefox connect to the document that the shortcut is linked to? The .nrl file extension belongs to a piece of software called FileSite (document management system).

  What type of content is displayed in "tools > Page Info > general" If you open a file of this type?

  • Press F10, or press the Alt key to bring up the 'Menu Bar' temporarily if the menu bar is hidden.

  As displayed above, simply configure the server to send this file with the MIME type supported for Firefox to open a dialogue rather than make the file.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.