Compressor 3.5: "QuickTime error - 50,'" QuickTime - 70 ".

Similar Questions

• QuickTime, export error QuickTime for Windows is unable to export H.264 on computers with more than 16 cores of CPU because of a problem in the Apple H.264 compressor component. Export error Incompatible Video Codec found in the preset

  I get now after a recent update this error pop up.  I already tried to reinstall QuicktimePro and I am still getting this error.  Any thoughts on what may cause this problem and how can I solve it?

  Thank you

  Media Encoder QuickTime H.264 encoding is based on the QuickTime component provided by Apple.  Unfortunately, the version Windows of QuickTime from Apple does not support the 16 + processor cores.  Unless Apple corrects this problem on their own, we cannot do this work on Media Encoder.  Another solution is to use encoding H.264 (.mp4) and it works on any CPU configuration.

• Reading jerky canvas...

  I have my settings for the clips that I made in the compressor with the sequence settings matched.

  I turned all my clips in ProRes 422 HQ and I'm trying to read in the canvas, the video is choppy.

  If I change the compressor setting in Quicktime video settings to the h.264 format (in the general tab of the timeline), playback is fine, but then every single item must be made I did drag on the timeline or make changes to.

  Need help please, I have been using this software for 10 years, never had any problems like this before.

  Concerning

  What hard drive you use to play this media from? What type of connection to the computer?

  What are the parameters of your sequence?

  Do not use the H.264... FCP doesn't do well with this format.

• DOWNLOAD QUICKTIME ERROR

  Download happens except at the end, I get this error message, then it UN-do the download.
  33 FF did the same in previous versions.

  File security get error:
  C:\ProgramData\AppleComputer\Installer Cache\Quicktime 7.73.80.64\GetLastError: 5

  Downloaded from the site apple under Win 7.

  What is the error at the end of the download?

  In the list of Add ons Quicktime appears in your troubleshooting info.

• Why Quicktime suddenly gives me errors of version and vulnerability for v QT 7.6.6 after updating to firefox 22?

  After the forced 22 Firefox update, Quicktime fails with an error ' version 7.6.6 vulnerability. " I am running OSX Snow Leopard 10.6.8. The plugin Firefox (Tools/Add-ons custom) also shows the vulnerability. More suggested solutions AND the Firefox troubleshooting, see the:

     File: QuickTime Plugin.plugin
     Path: /Library/Internet Plug-Ins/QuickTime Plugin.plugin
     Version: 7.6.6
     State: Enabled (STATE_VULNERABLE_UPDATE_AVAILABLE)
  

  BUT, when I use Finder, I can't find the file or folder. The only plugin in this folder is Google Earth.

  My system shows everything is running, OS, applications, and al., with the current Quicktime version 10, so there is no possibility of UPDATE_AVAILABLE, because there is NO more updated Quicktime than what I use.

  If he is a real vulnerability for Quicktime version, why all of a sudden Firefox takes two years so he could finally appear in Firefox 22? And mys system is completely updated, it seems no possible to upgrade to a newer version of Quicktime that 7.6.6, one who apparently comes with os x 10.6.8. If it IS a mistake, I don't know how to fix it.

  Meanwhile, Quicktime is still running in Safari.

  Hello, quicktime 7.7.0 and down on mac os x was put on the red list of mozilla recently (this is not directly related to the release of firefox 22 & will be also implemented in earlier versions of the browser).

  https://addons.Mozilla.org/en-us/Firefox/blocked/P408

  in the appropriate bug report, I asked to reconsider this decision, perhaps the situation for mac os x 10.6 not took into consideration - quicktime 7.6.6 is the latest version available for download on the website of apple for this system...

• QuickTime error when installing Windows 10

  Well, I'm currently on my Mac Pro (2014) right now and I use VMware Fusion to install Windows 10, but when I install QuickTime 7, he started to say this error:

  "ul_catalog.98cb24ad_52fb_db5f_ff1f_c8b3b9a1e18e not found in the quicktime.cab CAB file. This may indicate a network error, an error reading from the cd-rom, or a problem with this package. »

  I really need help with this, my Mac OS X computers, but why Windows has this error has ever done? My iPhone 6s / 6 s more, my iPad 9.7 Pro and 12.9, My Galaxy S7 Edge and my Apple Watch doesn't have this problem. Why Windows? My iMac 4K / 5K ever had, is not even on my Macbook Pro. I NEED URGENT CARE!

  Apple has removed Quicktime for Windows.

• QuickTime Player 7.7.9 for Windows failed to initialize error 2096

  I tried to open QuickTime Player 7.7.9 in Windows 7 Home Premium SP1 with the latest updates for February 2016 and a pop-up message with the message of: QuickTime failed to initialize error 2096. There was also something to check that the application has been installed correctly.

  I opened the Panel configuration/programs and features/QuickTime 7 and selected repair. Open Setup ran the repair and closed. I restarted the computer and I tried to run QuickTime player with the same result. I uninstalled QuickTime player, restarted the computer, downloaded and installed QuickTime Player from the Apple web site.

  I tried to run the new QuickTime Player that sent the same message.

  I have somehow found and executed the installer of QuickTime Player 7.7.6 (1680.95.31). I am able to access the QuickTime Player. I checked the updates and ran the update for 7.7.9 and get once more: QuickTime failed to initialize error 2096.

  Any ideas why 7.7.9 does not work to me that computer gremlins are playing with my mind.

  Tom R

  snrdg2801, Apple's site, the latest version of QuickTime for Windows 7 is 7.7.9, you lost me here. Why aren't you install that?

• I get an error message whenever I try to update iTunes, Quicktime and iCloud

  I tried to update my iTunes and Quicktime iCloud versions since a few days now, and every time I do, I get an error message. I tried uninstalling and reinstalling iTunes but when I do this I get an error that says I can't install iTunes at all. I use Windows 8.1. Does anyone else know this? Does anyone know why this might be happening and how to fix it?

  It would be helpful if you could tell us exactly what the error message says

• QuickTime gives error - 2048 when opening for mht files

  When you try to open a .mht file, "error - 2048: could not open the .mht file because it is not a QuickTime file.»

  This just started happening in the last week.  Any suggestions on how to fix?  I'm not finding anything.

  As you can see in the next document in Apple...
  . MHT is not a supported format.

  Media formats supported by QuickTime Player
  http://support.Apple.com/kb/HT3775

  Maybe the file association for. MHT has been
  accidentally changed.

  I would say... Right-click the. A MHT file... and
  choose... Open with / Internet Explorer.

  The following link might be worth a visit:

  . MHT file extension
  http://www.FileInfo.com/extension/mht

• Get the QuickTime Player error has encountered an error and must be shut down

  Whenever I try to oppen the QuickTime Player or QuickTime Updater, I get the message that it has encountered an error and needs to close.  Anhyone know what can be wrong?  If I try to remove the program and reinstall, I get the same message.

  Hello

  1. have you made changes on the computer recently?

  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Error MESSAGE: "Setup HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSADMIN "_".

  ERROR MESSAGE:

  "THE installation program HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. "LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSTEM ADMINISTRATOR.

  TRY SEVERAL DIFFERENT PROGRAMS TO INSTALL/DOWNLOAD AND KEEP THIS SIMILAR ERROR MESSAGE ABOVE!

  WHEN, IN FACT, I AM THE ADMINISTRATOR ON MY COMPUTER! HE DIDN'T THERE WAS NO OTHER USERS ON MY COMPUTER. WHY IS THAT IT IS SAYING THIS? VERY FRUSTRATING! THANKS FOR YOUR HELP IN ADVANCE!

  1. Open the prompt with administrator privileges by opening the Start Menu, type cmd in the search box, pressCtrl + Shift + Enter or click Start orb, all programs, Accessories, right-click on command prompt and selectrun as administrator.
  2. Type the following at the command prompt, and then press enter after:

     NET user administrator / Active: Yes

  3. Restart your computer and logon as an administrator.

• data execution error, quicktime

  QuickTime fails to open due to data execution prevention error

  Hello

  Data Execution Prevention (DEP) is a security feature that can help prevent damage to your computer from viruses and other security threats.

  You can turn off DEP for this program and then try to fix it. You will be able to use the program, but it might be vulnerable to an attack that could spread to your other programs and files.

  To turn off DEP for QuickTime program, follow the steps below:

  a. click the Start button and select Control Panel.

  b. click System and Maintenance and then click System.

  c. click on advanced system settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. running, click settings.

  e. click the Data Execution Prevention tab and then click on turn on DEP for all programs and services except those I select.

  f. Select the checkbox next to the QuickTime program, and then click OK.

  g. If the program is not in the list, click Add. Navigate to the Program files, search for the executable file of the program (it will have the .exe extension) and then click Open.

  Important:-it is not recommended to turn off DEP; We just try to limit the question. Don't forget to turn on DEP for the QuickTime program. See link below to turn on DEP for the program.

  See also the following articles:

  What is Data Execution Prevention? : http://windows.microsoft.com/en-US/windows-vista/What-is-Data-Execution-Prevention

  Change Data Execution Prevention settings: http://windows.microsoft.com/en-US/windows-vista/Change-Data-Execution-Prevention-settings

  Data Execution Prevention: Frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Data-Execution-Prevention-frequently-asked-questions

• Error "a newer version of quicktime is already installed" when you attempt to install QuickTime

  I am running Vista as an administrator.  I was running itunes version 8.03 for several months.  When I went to upgrade to itunes 9.x, I started to have problems. the upgrade was unsuccessful.  I then uninstalled quick time and itunes and all the other software Apple via the Control Panel, windows Install CleanUp and also delete the apple key in the registry under the local computer and the current user.  I did a search on the computer and remove all apple, quick time and records of safari.

  I have also created a new administrator user and tried to install through this user, without success, exact same results.

  When I try to install itunes via the downloaded executable software I get the error «a newer version of quick time is already installed...» »

  I spent several hours on the phone with Apple and they indicated that they believe that vista is now a registry entry somewhere for quick time that causes the problem.  They suggested that I contact Microsoft.

  At this point, I can't use my i touch and would like to get this resolved as soon as POSSIBLE.

  Hello flybydug,

  Thanks for posting on the Microsoft answers Forum.

  Apple should have been able to tell where, in the registry that QuickTime written in. However, review the information below.

  1. go to C:\Program Files and delete the entire folder QuickTime.

  2. click on start - search/search - all files and folders, select the hard disk (C :) to look in, type in QuickTime, and then click search / search when list files appear, click right on and remove any that you confirm are associated with QuickTime.)

  3. Click Start, type regedit, and then click OK. Click on the + to:

  Go to: HKEY_LOCAL_MACHINE\Software
  In the software submenu, click directly on the entry of Apple Computer, then scroll for QuickTime, right-click and select Remove.

  Note: If you click on the + to the "entry of Apple Computer, it will grow and you should see"QuickTime"which are listed there.

  4. exit regedit. It will save their output.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error code 2738 when uninstalling Quicktime 7

  I had installed Quicktime 7 on my PC (OS = Windows Vista Home Basic) earlier. Now when I try to uninstall it, I get an error that reads "Setup encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2738 ".

  I tried gel several times and even using 'Safe mode' as well as 'Safe Mode with network. I get the same error all along.

  I have also downloaded the latest version of iTunes + Quicktime from the Apple site & tried installing that, but again, I received the same error.

  Can someone help me uninstall the old version of Quicktime & install the latest version of iTunes + Quicktime?

  Hi Sujith,

  You can try the following procedure:

  you have to "Run as Administrator"
  Even if you are the administrator, you need to elevate your privileges of
  Once in a while.

  Windows Vista

  1. on the start menu, click all programs.

  2. click on accessories.

  3. right click on command prompt and choose Run as administrator of the
  context menu.

  4. when the user account control dialog box appears, click on continue.

  5. at the command prompt, type the following:
  regsvr32 vbscript.dll

  6. press enter on your keyboard.

  7. a message appears saying 'DllRegisterServer in vbscript.dll.
  has succeeded. »

  8. click OK, and then try reinstalling iTunes or QuickTime.

  Go through the link below to download and install the latest version of iTunes and QuickTime

  http://support.Apple.com/kb/TS1331

  Thank you
  Marnie.

• Cannot install quicktime + itunes Error 1316.A

  Impossible to install quicktime + itunes Error 1316.A a NETWORK ERROR OCCURRED WHILE ATTEMPTING TO READ FROM THE FILE C:\WINDOWS\INSTALLER\QUICKTIME. MSI

  PLEASE HELP AS SOON AS POSSIBLE... Thank you

  1. start your OWN Thread in these Forums on your own particular problem; do not turn away from someone else's thread.

  2 contact Apple

  http://www.Apple.com/support/iPodTouch/

  Any other problem iTunes, contact Apple with their software:

  http://www.Apple.com/support/iTunes/

  Mick Murphy - Microsoft partner