Computer a appcrashes

I was updating my computer these programs block every day. I know that Secunia is a third-party software, but the msfeedssync.exe is not. Also the HP utility is not. I have not ran sfc/scannow, no problemfound. I then ran DISM.exe scanhealth and no problems found. The msfeedssync.exe is a VERY important program, so I would like to get it fixed. Thank you

                                                                                                                   UI [2] = c: Program Files (x 86) \Hewlett-Packard\HP utility Center\HPPU.exe
UI [3] = HP Premium utility stopped working
UI [4] = Windows can check online for a solution to the problem.
UI [5] = check online for a solution and close the program
UI [6] = check online for a solution later and close the program
UI [7] = close the program
LoadedModule [0] = c: Program Files (x 86) \Hewlett-Packard\HP utility Center\HPPU.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule [2] = C:\Windows\SYSTEM32\KERNEL32. DLL
LoadedModule[3]=C:\Windows\SYSTEM32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\SYSTEM32\USER32.dll
LoadedModule[5]=C:\Windows\SYSTEM32\GDI32.dll
LoadedModule[6]=C:\Windows\SYSTEM32\ADVAPI32.dll
LoadedModule[7]=C:\Windows\SYSTEM32\SHELL32.dll
LoadedModule[8]=C:\Windows\SYSTEM32\ole32.dll
LoadedModule[9]=C:\Windows\SYSTEM32\SHLWAPI.dll
LoadedModule [10] = c: Program Files (x 86) \Hewlett-Packard\HP utility Center\MSVCR100.dll
LoadedModule[11]=C:\Windows\SYSTEM32\d2d1.dll
LoadedModule[12]=C:\Windows\SYSTEM32\DWrite.dll
LoadedModule [13] = c: Program Files (x 86) \Hewlett-Packard\HP utility Center\MSVCP100.dll
LoadedModule[14]=C:\Windows\SYSTEM32\msvcrt.dll
LoadedModule[15]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[16]=C:\Windows\SYSTEM32\RPCRT4.dll
LoadedModule[17]=C:\Windows\SYSTEM32\combase.dll
LoadedModule[18]=C:\Windows\SYSTEM32\SspiCli.dll
LoadedModule[19]=C:\Windows\SYSTEM32\CRYPTBASE.dll
LoadedModule[20]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
LoadedModule [21] = C:\Windows\system32\IMM32. DLL

LoadedModule[22]=C:\Windows\SYSTEM32\MSCTF.dll
LoadedModule[23]=C:\Windows\system32\uxtheme.dll
LoadedModule [24] = c: Program Files (x 86) \ATI Technologies\HydraVision\HydraDMH.dll
LoadedModule[25]=C:\Windows\SYSTEM32\MSVCR110.dll
LoadedModule[26]=C:\Windows\SYSTEM32\clbcatq.dll
LoadedModule[27]=C:\Windows\SYSTEM32\OLEAUT32.dll
LoadedModule[28]=C:\Windows\SYSTEM32\dxgi.dll
LoadedModule[29]=C:\Windows\SYSTEM32\d3d11.dll
LoadedModule[30]=C:\Windows\SYSTEM32\aticfx32.dll
LoadedModule[31]=C:\Windows\SYSTEM32\VERSION.dll
LoadedModule[32]=C:\Windows\SYSTEM32\atiuxpag.dll
LoadedModule[33]=C:\Windows\SYSTEM32\atidxx32.dll
LoadedModule[34]=C:\Windows\SYSTEM32\SHCORE.dll
LoadedModule[35]=C:\Windows\SYSTEM32\PROPSYS.dll
LoadedModule[36]=C:\Windows\SYSTEM32\profapi.dll
LoadedModule[37]=C:\Windows\SYSTEM32\Secur32.dll
LoadedModule[38]=C:\Windows\SYSTEM32\SETUPAPI.dll
LoadedModule[39]=C:\Windows\SYSTEM32\CFGMGR32.dll

THIS ONE, I'M WORRIED

GI [0]. Name = name of the Application
SIG [0]. Value =msfeedssync.exe
GIS [1]. Name = Version of the Application
GIS [1]. Value =10.0.9200.16384
GIS [2]. Name = timestamp of the Application
GIS [2]. Value = 50109c 69
GIS [3]. Name = name of the Module fault
GIS [3]. Value =ntdll.dll
GIS [4]. Name = Fault Module Version
GIS [4]. Value =6.2.9200.16912
GIS [5]. Name = Fault Module Timestamp
GIS [5]. Value = 536464ba
GIS [6]. Name = Exception Code
GIS [6]. Value = c0000005
GIS [7]. Name = offset of the Exception
GIS [7]. Value = 0000000000005491
DynamicSig [1]. Name = OS Version
DynamicSig [1]. Value=6.2.9200.2.0.0.768.101
DynamicSig [2]. Name = locale ID
DynamicSig [2]. Value = 1033
DynamicSig [22]. Name = additional Information 1
DynamicSig [22]. Value = 9c3b
DynamicSig [23]. Name = additional Information 2
DynamicSig [23]. Value = 9c3b1373772275578373b9faae256a4d
DynamicSig [24]. Name = additional Information 3
DynamicSig [24]. Value = 7700
DynamicSig [25]. Name = additional Information 4
DynamicSig [25]. Value = 77005a65177b640f75678574e8a6cd1f
UI [2]=C:\Windows\system32\msfeedssync.exe
LoadedModule[0]=C:\Windows\system32\msfeedssync.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule [2] = C:\Windows\system32\KERNEL32. DLL
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\msvcrt.dll
LoadedModule[5]=C:\Windows\system32\ole32.dll
LoadedModule[6]=C:\Windows\SYSTEM32\combase.dll
LoadedModule[7]=C:\Windows\system32\RPCRT4.dll
LoadedModule[8]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[9]=C:\Windows\system32\GDI32.dll
LoadedModule[10]=C:\Windows\system32\USER32.dll
LoadedModule [11] = C:\Windows\system32\IMM32. DLL
LoadedModule[12]=C:\Windows\system32\MSCTF.dll
LoadedModule[13]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[14]=C:\Windows\system32\bcryptPrimitives.dll
LoadedModule[15]=C:\Windows\system32\uxtheme.dll
LoadedModule [16] = c: Program Files (x 86) \ATI Technologies\HydraVision\HydraDMH64.dll
LoadedModule[17]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[18]=C:\Windows\SYSTEM32\MSVCR110.dll
LoadedModule[19]=C:\Windows\SYSTEM32\clbcatq.dll
LoadedModule[20]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[21]=C:\Windows\System32\msfeeds.dll
LoadedModule[22]=C:\Windows\system32\SHLWAPI.dll
LoadedModule[23]=C:\Windows\system32\iertutil.dll
LoadedModule[24]=C:\Windows\system32\SHELL32.dll
LoadedModule[25]=C:\Windows\system32\SHCORE.dll
LoadedModule[26]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[27]=C:\Windows\system32\rsaenh.dll
LoadedModule[28]=C:\Windows\system32\WININET.dll
LoadedModule[29]=C:\Windows\system32\USERENV.dll
LoadedModule[30]=C:\Windows\system32\profapi.dll
LoadedModule[31]=C:\Windows\system32\Secur32.dll
LoadedModule [32] = C:\Windows\system32\SSPICLI. DLL
LoadedModule[33]=C:\Windows\System32\msxml6.dll
LoadedModule[34]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9200.16579_none_418ab7ef718b27ef\comctl32.dll
LoadedModule[35]=C:\Windows\system32\WS2_32.dll
LoadedModule[36]=C:\Windows\system32\NSI.dll
LoadedModule[37]=C:\Windows\system32\winhttp.dll
LoadedModule[38]=C:\Windows\system32\mswsock.dll
LoadedModule [39] = C:\Windows\system32\IPHLPAPI. DLL
LoadedModule [40] = C:\Windows\system32\WINNSI. DLL
LoadedModule[41]=C:\Windows\System32\msfeedsbs.dll
LoadedModule[42]=C:\Windows\System32\netprofm.dll
LoadedModule[43]=C:\Windows\system32\slc.dll
LoadedModule[44]=C:\Windows\System32\npmproxy.dll
LoadedModule[45]=C:\Windows\system32\urlmon.dll
LoadedModule[46]=C:\Windows\system32\DNSAPI.dll
LoadedModule[47]=C:\Windows\system32\IEFRAME.dll
LoadedModule[48]=C:\Windows\system32\dwmapi.dll
LoadedModule [49] = C:\Program Files\Bonjour\mdnsNSP.dll
LoadedModule[50]=C:\Windows\System32\rasadhlp.dll
LoadedModule[51]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[52]=C:\Windows\System32\mshtml.dll
LoadedModule[53]=C:\Windows\System32\taskschd.dll
LoadedModule[54]=C:\Windows\system32\XmlLite.dll
State [0]. Key = transport. DoneStage1
State [0]. Value = 1
FriendlyEventName = Stopped Working
ConsentKey = APPCRASH

It is Secunia personal software Inspector

NsAppName = PSIA.exe
Response.BucketId = 0d54ce7eac8ca0d672eb8b2b144c5b68
Response.BucketTable = 1
Response.LegacyBucketId = 73317112638
Response.Type = 4
SIG [0]. Name = name of the Application
SIG [0]. Value = PSIA.exe
GIS [1]. Name = Version of the Application
GIS [1]. Value = 3.0.0.9016
GIS [2]. Name = timestamp of the Application
GIS [2]. Value = 52a1d50f
GIS [3]. Name = name of the Module fault
GIS [3]. Value = ntdll.dll
GIS [4]. Name = Fault Module Version
GIS [4]. Value = 6.2.9200.16912
GIS [5]. Name = Fault Module Timestamp
GIS [5]. Value = 53645e25
GIS [6]. Name = Exception Code
GIS [6]. Value = c0000005
GIS [7]. Name = offset of the Exception
GIS [7]. Value = 00051d8a
DynamicSig [1]. Name = OS Version
DynamicSig [1]. Value=6.2.9200.2.0.0.768.101
DynamicSig [2]. Name = locale ID
DynamicSig [2]. Value = 1033
DynamicSig [22]. Name = additional Information 1
DynamicSig [22]. Value = 5861
DynamicSig [23]. Name = additional Information 2
DynamicSig [23]. Value = 5861822e1919d7c014bbb064c64908b2
DynamicSig [24]. Name = additional Information 3
DynamicSig [24]. Value = 1a2a
DynamicSig [25]. Name = additional Information 4
DynamicSig [25]. Value = 1a2aa8e38ac8adbb6fe1e594fa623c2e
UI [2] = C:\Program Files (x86)\Secunia\PSI\PSIA.exe
UI [5] = check online for a solution (recommended)
UI [6] = check for a solution later (recommended)
UI [7] = close
UI [8] = officer of Secunia PSI has stopped working and was closed
UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
UI [10] = & close
LoadedModule [0] = C:\Program Files (x86)\Secunia\PSI\PSIA.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule [2] = C:\Windows\SYSTEM32\KERNEL32. DLL
LoadedModule[3]=C:\Windows\SYSTEM32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\SYSTEM32\ole32.dll
LoadedModule[5]=C:\Windows\SYSTEM32\OLEAUT32.dll
LoadedModule[6]=C:\Windows\SYSTEM32\ADVAPI32.dll
LoadedModule [7] = C:\Windows\SYSTEM32\PSAPI. DLL
LoadedModule[8]=C:\Windows\SYSTEM32\VERSION.dll
LoadedModule[9]=C:\Windows\SYSTEM32\NETAPI32.dll
LoadedModule[10]=C:\Windows\SYSTEM32\Secur32.dll
LoadedModule [11] = C:\Windows\SYSTEM32\IPHLPAPI. DLL
LoadedModule[12]=C:\Windows\SYSTEM32\WININET.dll
LoadedModule [13] = C:\Windows\SYSTEM32\FLTLIB. DLL
LoadedModule[14]=C:\Windows\SYSTEM32\SHELL32.dll
LoadedModule[15]=C:\Windows\SYSTEM32\combase.dll
LoadedModule[16]=C:\Windows\SYSTEM32\msvcrt.dll
LoadedModule[17]=C:\Windows\SYSTEM32\RPCRT4.dll
LoadedModule[18]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[19]=C:\Windows\SYSTEM32\GDI32.dll
LoadedModule[20]=C:\Windows\SYSTEM32\USER32.dll
LoadedModule[21]=C:\Windows\SYSTEM32\netutils.dll
LoadedModule[22]=C:\Windows\SYSTEM32\srvcli.dll
LoadedModule[23]=C:\Windows\SYSTEM32\wkscli.dll
LoadedModule[24]=C:\Windows\SYSTEM32\NSI.dll
LoadedModule [25] = C:\Windows\SYSTEM32\WINNSI. DLL
LoadedModule[26]=C:\Windows\SYSTEM32\iertutil.dll
LoadedModule[27]=C:\Windows\SYSTEM32\USERENV.dll
LoadedModule[28]=C:\Windows\SYSTEM32\SHLWAPI.dll
LoadedModule[29]=C:\Windows\SYSTEM32\SspiCli.dll
LoadedModule[30]=C:\Windows\SYSTEM32\profapi.dll
LoadedModule[31]=C:\Windows\SYSTEM32\CRYPTBASE.dll
LoadedModule[32]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
LoadedModule[33]=C:\Windows\SYSTEM32\CRYPTSP.dll
LoadedModule[34]=C:\Windows\system32\rsaenh.dll

LoadedModule[35]=C:\Windows\SYSTEM32\ntmarta.dll
LoadedModule[36]=C:\Windows\SYSTEM32\clbcatq.dll

Hello Tracy,.

I suggest to follow the steps in the link below and check if it helps you.

http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/what-does-the-Bonjour-application-does-in-the/ad6f1c5b-21ea-44C8-95d6-32e4afe4e6af

Let us know the status of the issue.

Tags: Windows

Similar Questions

  • Could not open the laptop computer error: APPCRASH

    Original title: Please can someone help me solve this problem...

    Dear Sir/Madam

    Today, I have error on my laptop, please help me to solve this...

    Problem signature: problem event name: APPCRASH application name: explorer.exe Application Version: 6.1.7601.17567 timestamp of the Application: 4d6727a7 fault Module name: StackHash_eea4 fault Module Version: 6.1.7601.17725 fault Module Timestamp: 4ec49b60 exceptional Code: c0000374 Exception Offset: 000c380b OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1057 additional information 1: complementary eea4 2 information: Additional Information on eea4e5fa5e6763f53a185ce2750e2bdb 3: additional b775 of Information 4 : b775425640ed03c2a14a1b9358ae2fa9 read our privacy policy online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 if the online privacy statement is not available, please read our offline privacy statement: C:\Windows\system32\en-US\erofflps.txt

    My laptop with Windows 7 Home Premium
    Kasperksy Anti-virus

    Concerning
    BUDi

    Thanks Vino

    Today, I already fix it, its because I am install some accountants program what bulking with firebird.
    So, today I already fix the problem with I delete firebird.exe file in C:\windows\system32

    Thank you and regrads

    BUDi

  • Computer starts but cannot access all programs, error "the APPCRASH event name.

    Original title: computer starts but can not access to all programs

    What is an APPCRASH problem event name?       or entry point setupapi-CM Get brother is not found in the CFGMGR32.dll dynamic link library.

    Hi Philippe,.

    Please contact Microsoft Community. I will surely help you with the resolution of this error on startup.

    APPCRASH is a term used by Windows for a crash of the application and is reported as "problem event name: APPCRASH", it will also contain information about the name of the program crashed.

    This problem might have occurred because of these reasons:

    1 conflict between third-party applications.

    2 virus.

    3 corrupt system files.

    Try the steps listed here and see if it helps:

    Method 1:
    I suggest to start the computer using safe mode and check if the problem occurs or not. If this isn't the case, I suggest you to put the computer in a clean boot state and check if it helps.

    Step 1:
    Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.
     
    Start your computer in safe mode.
    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:
    If the issue happen not in Mode without failure, perform a clean boot and check. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135/en-us

    Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

    Method 2:
    If the problem persists, I suggest you analyze your computer by using the Microsoft Safety scanner to make sure that the computer is virus-free. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    -The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    -If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Method 3:
    If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

    Use the System File Checker tool to repair missing or corrupted system files
    http://support.Microsoft.com/kb/929833/en-us

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • How can I fix this appcrash on my computer?

    I try to open my dell webcam, but I am unable to do so due to appcrash. Here is the information I had on this subject.
    Problem event name: APPCRASH
    Application name: WebcamDell2.exe
    Application version: 1.0.24.0
    Application timestamp: 4a41e20f
    Fault Module name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception code: c0000005
    Exception offset: 00000000
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Please help me! Thank you.

    The module that seems to be the cause of the accident is not formally identified:

    Fault Module name: StackHash_0a9e
    Fault Module version: 0.0.0.0

    You can download and run the following application (AppCrashView):

    http://www.NirSoft.NET/utils/app_crash_view.html

    Click on one of the recent errors WebcamDell2.exe.

    Can you copy and paste the information that appears in the lower window that loaded modules.

  • Skype "AppCrash" when you try to connect?

    So I've had Skype since I got my computer and it worked perfectly, but now all of a sudden whenever it tries to connect, it is said that Skype has stopped working and in details, he says it's a "appcrash" so I uninstalled and downloaded again, but he continues to say that but still works fine on my phone. Does anyone know how to fix this?

    Please, run the DirectX diagnostic tool. Run dxdiag.exe (Start - Run or Win + R key), then press on enter or click 'OK '. Once the diagnosis is complete, "save all information...". "in a text file. Please attach this file to your message.

    Be aware that you will have to compress this file before attaching it here.

    You can also try a reset Skype to see if that solves the problem:

    http://community.Skype.com/T5/Windows-desktop-client/Skype-crashes-on-startup-after-upgrade/m-p/3169...

  • APPCRASH svchost.exe_wuauserv - Windows Update stopped working - Vista Ultimate x 64

    "Windows Update has stopped working" - exact error message. I spent three months of reading the forums, looking for answers and applying diligently solutions - which none have worked - of course :)

    This is not the problem of BITS. Yes, I also tried sfc/scannow. This isn't a new installation of Vista. Latest updates of success were 24 January

    The error relates to: APPCRASH - svchost.exe_wuauserv
    Exception code: c0000005
    Exception offset:... 001029cd

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: svchost.exe_wuauserv
    Application version: 6.0.6001.18000
    Application timestamp: 47919291
    Default name of the Module: c:\windows\system32\wuaueng.dll
    Fault Module Version: 7.2.6001.788
    Timestamp of Module error: 48f7aab3
    Exception code: c0000005
    Exception Offset: 00000000001029cd
    OS version: 6.0.6001.2.1.0.256.1
    Locale ID: 7177
    Information additional ca 7 1: 6
    More information 2: f5301b6cae295bf8a2fa5c4797c21e55
    3 more information: 53dc
    Additional information 4: 2655659e60e9fe4d553a061dcca31137
    (in print manually so Colocation errors above)

    Please, I am desperate to solve this problem and finally get secure windows-without even reinstalling Vista :)

    Thank you very much

    Hello ms_frustrated,

    I recommend that you perform a repair installation.  It would be the fastest way and repair you the computer and while still keeping your documents.  PLEASE SAVE YOUR SYSTEM VISTA FIRST.  The link below explains how to perform a repair installation.  After your installation, verify that Windows update works before installing anything.

    http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/58ed3b94-D603-4FEC-83CA-b3d15d1275b8/

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I try to start the game F1 2010, I get "appcrash" message.

    Original title: f1 2010 error msg appcsrash

    while trying to start the game, I get an error msg "appcrash" I've updated my direct x drivers and windows, any help would be appreciated thx

    Windows 7 service pack 2 ati radeon x 1200 amd athlon 64 dual core. Here are the details of the error

    Problem event name: APPCRASH

    Application name: F1_2010_game.exe

    Application version: 1.0.0.0

    Application timestamp: 4 c 766231

    Fault Module name: ntdll.dll

    Fault Module Version: 6.0.6001.18000

    Fault Module Timestamp: 4791a7a6

    Exception code: c0000005

    Exception offset: 00043387

    The system version: 6.0.6001.2.1.0.768.3

    Locale ID: 1033

    Additional information 1: fd00

    More information 2: ea6f5fe8924aaa756324d57f87834160

    Additional information 3: fd00

    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    This is another forum with errors on F1_2010 game:
    If you have installed Steam.

    Hello *, thank you for contacting Steam support.
    If you're currently running Vista or Windows 7, please follow the instructions in the following link: title: Windows 7 and Vista troubleshooting Link: http://support.steampowered.com/kb_a...5688-IFHZ-2170
    You may also need to manually run the secondary installers required by this game. Out of steam completely. Access your F1 2010 installation folder
    (Usually C:\Program files\Steam\steamapps\common\f1 2010\)
    Run the following installation programs: ...\steamapps\common\f1 2010\Redist\DirectX\DXSETUP.exe ...\steamapps\common\f1 2010\Redist\OpenAL\OpenALwEAX.exe

    Also, install the latest version of the Games For Windows Live software, which can be found here: http://www.microsoft.com/games/en-us...rketplace.aspx
    Restart your computer and test the issue. Also, if you continue to have difficulties, please run the following installation program: ...\steamapps\common\f1 2010\Redist\Rapture3D\rapture3d_2.4.4game.exe

    Reboot once more and test the issue again. If the problem persists, please fill out these guides: title: this game is currently unavailable
    Link: http://support.steampowered.com/kb_a...4595-WEXN-6831

    Title: Games do not work after 'Preparation to launch' link:
    http://support.steampowered.com/kb_a...6218-USFX-5568

    If you still have difficulties, please contact the support team for this title: title: F1 2010 link: http://support.steampowered.com/kb_a...9126-QTJK-9475

    I hope this helps.

  • APPCRASH at the launch of the game.

    The game has worked before, tried to start again, and this error came. I tried several relocations and wanted to know if anything else will fix it before you reformat. It is also the only thing having this problem.
    My specs:
    AMD Phenom 9950 BE CPU
    4 GB ram PC2 8500
    Motherboard Gigabyte MA78GPM-DS2H
    ATI Radeon 4850 HD 1 GB
    Windows Vista Edition Home Premium

    Plese let me know if you need to know anything else.

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: engine.exe

    Application version: 0.0.0.0

    Application timestamp: 4a2f7a9c

    Fault Module name: engine.exe

    Fault Module Version: 0.0.0.0

    Timestamp of Module error: 4a2f7a9c

    Exception code: c0000005

    Exception offset: 0001db0b

    The system version: 6.0.6001.2.1.0.768.3

    Locale ID: 1033

    Additional information 1: fd33

    More information 2: c523e61f0806a3a1f44877890ef4f89d

    Additional information 3 c: 904

    Additional information 4: 5c0ab8fcdaaddf930bab222e13394b38

    Thanks for any help.

    Hi MiDeR

    I agree with Gloria.  If you are having problems with the game even after formatting the hard drive and reinstall Windows Vista, the file of game, or a hardware problem happens with your computer.

    It is the "only" problem that you encountered with the computer, with this game?
    What Service Pack are you, 1 or 2?  If you have SP2 there, have you installed 1 SP1 and SP2?
    If so, uninstall SP2 and see if the problem goes away.

    Question: (apologies if this has been mentioned and I forgot), it's a game "online"?  Which means, you use Internet Explorer to play or there is an application that you have installed from the Web and it plays through the Internet?  I ask because if it is using Internet Exploer, then lets start IE without Add-ons.
    Click Start > all programs > click surAccessoires > click on system tools > click Internet Explorer (No Add-ons)

    Thank you Ken
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My computer ran out of battery og by practicing a game and now I can play the game

    I played the game and my computer Asus ran out of battery and now I can get into the game, but I can't get to the game side where ist the game loading and then nothing happens. I can press enter the game is shot?

    What can I do about it? Problemsignatur
    Problemhaendelsesnavn: APPCRASH
    Programnavn:Westward_IV.exe
    Programversion:0.0.0.0
    Tidsstempel program: 4b0191c9
    Fejlmodulnavn: Westward_IV.exe
    Fejlmodulversion: 0.0.0.0
    Tidsstempel for fejlmodul: 4b0191c9
    Undtagelseskode: c0000005
    Undtagelsesforskydning: 00332560
    The system version: 6.0.6002.2.2.0.768.3
    Landestandard-id: 1030
    Verder information 1: 3 c 19
    Verder information 2: a54aff084bd449456520e45e3ff5da41
    Verder information 3: e6e5
    Verder information 4: 29792ad77aaf48c26609c1ab7d180d9c

    Hi Shannon,

    Welcome to the Microsoft Answers community.

    This is because the computer was arrested while playing game. The game files might have been corrupted.

    Method 1: The restore of the system on your computer.

    System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.
     
    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next.
    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. click on finish.

    For more information visit http://support.microsoft.com/kb/936212/

    Method 2: If the same problem then I suggest to uninstall and reinstall the game and check.

    Hope this information is useful.
    Let me know if it worked.
     
    Thank you, and in what concerns:
    Umesh P - Microsoft Support

  • APPCRASH error - then "extended attributes are incompatible" when I try to do something

    My laptop started to lose connection problems and I kept resetting linksys and it would work and then quit again. I had a mistake some time ago when the download of Norton, but it works very well since their. I then downloaded PC health and scanned and do add on errors. Today I really can't do much. I scan with Spyware Doctor and it said no infections, but still I can't do anything. Every error I get says APPCRASH or BXE and I cannot download anything to try to scan or system restore even the computer I only errors. I had to download Perfect Optimizer, but it will not work... just says everything has stopped working, Windows incident reports even stopped working... APPCRASH wermgr.exe said then C:\Program Optimzer/PerfectOptimizer.exe perfect - extended attributes are incompatible... said that whenever I try to do something? Any ideas?

    Hello
     

    It is not recommended to install several security software at the same time. Remove the additional security software, then check. Make sure you have at least a software installed.
     
    Method 1.
    Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
     
    a. follow the link below to start the free online scan:
    http://OneCare.live.com/site/en-us/default.htm
    b. run the malware removal tool from Microsoft.
    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    Method 2.
    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows

     
    We can use the approach 50 / 50 to narrow down the root cause of the problem.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Explorer; Jump Start; APPCRASH

    Can anyone help?

    I recently started to live something of a problem (i.e. in the last few hours!) ...

    When starting my computer, Windows Explorer does not start, and must be "jump started" (on a white, black screen, you can always press CTRL-ALT-DEL and turn the Task Manager and from there run explore - who can"stops working" after a bit and requires the restart...)

    I tried a Norton "Full analysis", which brought no solution...

    The following are the details of the error for the problem...

    Any help or information is greatly appreciated!

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: explorer.exe

    Application version: 6.0.6002.18005

    Application timestamp: 49e01da5

    Fault Module name: StackHash_551b

    Fault Module Version: 6.0.6002.18005

    Timestamp of Module error: 49e03821

    Exception code: c0000374

    Exception offset: 000afaf8

    The system version: 6.0.6002.2.2.0.768.3

    Locale ID: 2057

    Information additional 1: 551

    More information 2: 24a683590a80b23c94a71ad620bbe492

    Information additional 3:1526

    Additional information 4: a7f7cd8dd0e1ba9de5c20fa6c0773f33

    Read our privacy statement:

     

     

    You might consider creating a different user account for testing purposes.

    Alteration of the heap is a term that refers to the corruption of the memory used by a program.  It can cause unexpected results such that data corruption and the program crashes, as it seems that you are experiencing.

    A shell extension is an extensibility mechanism built into Windows - it helps developers third party to offer a feature that goes beyond what comes "in the box" with Windows. Add-ons - also offer additional features/functions.  However, the additional software is often responsible for sometimes things you encounter, unfortunately; Maybe it's because third-party developers don't test their software as completely or in configurations as much as Microsoft does / is capable of.  Malicious software may also be responsible for the instability of the program.

  • Getting APPCRASH KERNEL32. DLL error while trying to play Call of Duty Black Ops 2 for vista

    I had the 1st drive of game to work & when I arrived on the 2nd disc I get application not found, but it continues, but when I try to start the game I get a black screen where I can see my mouse move I tap Ctrl + alt + delete to terminate the program and get a message, the program collapsed unexpecetedly , so I check the event viewer and see an error in the application when I watched the game the message is

    fulting application t6sp.exe, version 1.0.0.1, time stamp 0x509a7621, failed module t6sp.exe, version 1.0.0.1, time stamp 0x509a7621, exception code 0 x 0000005, 0x0025aa2d, 0xcf8 process id offset, start time of application 0x01cdc6d2d24f269a.

    the imformation is

    type of fault bucket 3251435669 1

    name of the event APPCRASH

    response no

    cabin ID: 0

    signature of the problem

    P1: t6sp.exe

    P2: 1.0.0.1

    P3: 509a 7621

    P4: t6sp.exe

    P5: 1.0.0.1

    P6: 509a 7621

    P7: c0000005

    P8: 0025aa2d

    P9:

    P10:

    attached files

    C:\users\jon\appdata\local\temp\werfcc1. Temp.version.txt

    I ran guest he says he fixed the problems, but I tried to run the game & same problem

    I have not changed anything

    Help, please

    Hello

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    . What is the brand and model of the computer?

    Please follow the steps in the link below and check off the question:

     
    Game hangs or quits unexpectedly:
     
    Note: This article also applies to non-Microsoft games.
     

    Important note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    If the problem persists, I suggest you contact the game provider to get help from the link below:

    http://support.Activision.com/pkb_Home?clickedOn=MW3

    I hope that the information above helps you.

  • APPCRASH with iTunes: problem Signature

    Signature of the problem

    original title: APPCRASH with iTUNES, can anyone help? Here is the DIF:

    Hi CFields1029,

    ·         Where do you get this error message?

    ·         Did you do changes on the computer before the show?

    ·         What is the full error message?

    Follow these methods.

    Method 1: Uninstall and reinstall the iTunes application.

    Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    If the problem persists, contact Apple support for more help and information.

    http://support.Apple.com/kb/HE57

  • Problem report and Solutions; APPCRASH/mqsvc.exe/ bucket ID: 5356433

    Signature of the problem
    Problem event name: APPCRASH
    Application name: mqsvc.exe
    Application version: 6.0.6000.16386
    Application timestamp: 4549c31b
    Fault Module name: MQQM.dll
    Fault Module Version: 6.0.6002.18005
    Timestamp of Module error: 49e04161
    Exception code: c0000005
    Exception offset: 000000000011071c
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Information additional 1:5541
    More information 2: ae6d921b34944c3ff667425587aa2204
    Information additional 3:2032
    Additional information 4: f97085e2787d959769f5e9d89c72ad15

    Files helping to describe the problem (some files may be is no longer available)
    Version.txt
    AppCompat.txt
    minidump.mdmp

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    Bucket ID: 5356433

    Hello

    Use the startup clean and other methods to try to determine the cause of and eliminate
    the questions.

    ---------------------------------------------------------------

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.


    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • APPCRASH module name btwapi.dll getting the error "Windows Explorer has stopped working... »

    Hello
    In the home edition of Vista 32 IE 8 when I get the "search for files and folders:

    «Windows Explorer has stopped working...» "and in the watch box Details view:

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: Explorer.exe
    Application version: 6.0.6002.18005
    Application timestamp: 49e01da5
    Fault Module name: btwapi.dll
    Fault Module Version: 6.0.1.5500
    Timestamp of Module error: 46df031a
    Exception code: c0000005
    Exception offset: b 0004, 091
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional information 1: fd00
    More information 2: ea6f5fe8924aaa756324d57f87834160
    Additional information 3: fd00
    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    I hope you can help me on this...
    Thanks a lot guys.

    Hi PaulMazor,

    Well first of all, btwapi.dll is a process no system developed by Bluetooth. If you go on your computer, try to disable Bluetooth by going to network and Internet or however your wireless interface is configured on your computer. If you don't have Bluetooth on your computer, try to uninstall it. go to start > Control Panel > programs > uninstall programs > scroll down and uninstall. My last suggesting opens upward, the Windows Task Manager (press ctrl + alt + delete and release). Go to processes and disable the application there. Other that that, I can't help you any further.
    Good luck
    DJ

Maybe you are looking for