Computer ASUS laptop work with no warning
I have a laptop ASUS UL50A. The problem I have is that he periodically stops in the middle of a project without warning. How to fix this?
Hello
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
To be able to remove ALL and reinstall all the memory cards and cables (both ends where possible)-in fact
delete and replace - do not just tight. Remove the dust bunnies and clean the vents. Make sure that the
the fans run (before and after opening the case). If a laptop on what you can do is reinstall
memory and clean the ventilation openings (still may try to add a small fan as a test).
This sounds like material so if the above does not help you then probably need the help of a real
computer store (not the leeks and the glances at a Best Buy or other stores) or system manufacturer
Supported.
Collate ASUStek support, their documentation online and drivers, diagnostics and ask for their
Forums about known issues with this model.
ASUStek support
http://support.ASUS.com/
ASUStek Forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us
ASUStek drivers
http://support.ASUS.com/download/download.aspx?SLanguage=en-us
----------------------------------------------------------------------------------------------------------------------------------
Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
at this link as they will help solve or at least narrow down the questions. After that you can post the
information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
check with a real store of the computer or the system manufacturer's support would be a good idea though
I would try the possible solutions, you can first.
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).
We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites. You must try to resolve or reduce problems - when there's that much
material different from Bug_Check is usually involved.
ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html
===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html
-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html
------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I have a new computer toshiba laptop satellite with windows 8. NEED HELP!
I have a new computer toshiba laptop satellite with windows 8. It starts to turn on everytime I open the lid. How to disable this option? I want to press the button to turn on the laptop, not just open the lid? Thank you
Hello
Try to go into the Panel... Power options, and then select "Change Plan settings".
Now, select 'Change Advanced Power Settings'... on the screen that opens, you will see a menu with different options, which is "Power button and lid"
-
I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Is there anyway to align the document even if it requires me to crop or lose some on the edges?
Hi brad.
Yes. You can use the analysis tools to straighten and crop your document. Here is a link to a new tutorial. The key to activate the sliding options recovery is to choose the option of the camera Image in the drop to Enhance, and gives you tools to set the correct page for smoothing areas.
Donna.
-
Computer Asus laptop has ceased to recognize the external hard drive Hitachi
The external hard drive was working ceased to be recognized. I troubleshoot-conducted pilot issues, usb port, System Restore... nothing I've tried has worked. Suggestions?
Hello Hunter.
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
1. What is the model number of your PC Asus laptop?
2. you made any hardware or software changes on your computer before the show?Thank you for details on the question and your efforts to resolve.
This problem may occur because of corrupted USB controllers or device drivers.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the hardware and devices Troubleshooter and check. Please follow these steps:a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
b. click on 'show all' and then click 'hardware and devices'.
c. click 'Next' and follow the on-screen instructions.If this does not help, use method 2.
Method 2:
Uninstall and reinstall the USB controllers and check the issue. Please follow these steps:a. press Windows + X keys and click on Device Manager.
b. develop a 'USB Bus controllers'. Right click on a device, and then click Uninstall. Please repeat this step for each device.
c. once it's done, restart your computer.All USB controllers will automatically install.
I hope this information helps.
Please let us know if you need more help.
Thank you
-
computer hp laptop dv6 with a speaker Bose Soundlink Mini bluetooth pairing
I want to connect my HP dv6 with a Bose Soundlink Mini bluetooth speaker.
I can't... very frustrating. I matched the small Bose speaker on my phone very easily. BUT, to my laptop... can you help please. Thank you
Hi Jean-Guy and Pinehurst_Ken,
It is not as if these speakers Bose will work with a laptop. I came across two other topics where people have the same problem. Another person in our office has the same speakers and those who does not connect to laptop directly on their MAC or Windows.
Thank you
-
Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual.
Tried to use the HP printer Assistant: when I click on the button "scan a Photo Document or", I get a message "inaccessible Scanner. Also restarted the printer.
When I try to scan from Photoshop, the system first finds the printer, but it fails to connect.
Update HP says that my system is up to date.
HP Print and Scan Doctor 4.2 concludes and tells the printer on the welcome panel and seems to be able to communicate with him, up to a point.
It gives me a error 'pilot' (sorry if is not called in English - he takes over my keyboard language, which is French and says "Pilot error") and says that no communication could be created between the printer and the driver for scanning, and I have to restart the computer...
So I did and revived the software of the doctor, who gave me the same error message. This time, I clicked on 'Ignore' and let things. He ran a "Scan" Test twice and said that everything was going well or had been repaired. But strangely nothing on the printer during these 'tests '. And in the end, as he offered to do a scan test myself, I clicked on OK and I got the error message "inaccessible Scanner" again.
Then I did my scans on a USB key, as I have done a few times already, and has gone very well. But I'd be happy to have this function "Scan to computer" back. How?
Thanks in advance 23. It is resolved! See to the end.
I use McAfee (All Access - Total Protection). All green. I did some research using 'Paint', 'Windows Fax' and 'Scan' and checked all the results using McAfee: 'does detect any items that require your attention.
Here is a series of screenshots when you run printing HP and doctor Scan:
I click on "Scanning troubleshooting..."
I click on 'Ignore' right now because I know now that a restart will not help, but I have already tried (see my first post).
It seems that the problems have been repaired. And if I click on 'Scan Test', it seems too good, initially...
But if I go on and click on "Scan", bye bye:
Everything is the same as the first time, as I remember.
I checked services: dependencies are OK (RPC is in the WIA Service dependencies). Both services are "Running" and "automatic". I stopped and restarted WIA. No change.
I launched a sfc/scannow:
Before that, I changed the USB (a new one): no change.
AND THEN: I unplugged the USB cable connecting the port (USB3) standard (directly on the rear panel of the motherboard) and plugged into a PCI USB3 card. And all was well with the scan.
Do you think this says something about my motherboard (Asus X 79 Deluxe brand new) or on the Officejet?
-
My power supply battery icon States attached but do not load, why
Hello
Download and run the test utility of battery pack available on the next page and see if it reports any problems with your battery.
http://h20239.www2.HP.com/TechCenter/battery/battery_ts.htm
Kind regards
DP - K
-
Computer ASUS laptop specifications
I just bought this system from B & H. Problems with this configuration for HDV NLE with Premiere Pro?
- 2 GHz Intel Core 2 Quad processor Q9000
- RAM 6 GB (3x2Go)
- 640 GB (2x320GB) 7200 RPM hard drive
- Blu - ray ROM with DVD burning
- nVIDIA GeForce GTX 260 M 1 GB Graphics
- Screen 17 "wide
- Built-in camera and microphone
- Bluetooth, 802.11b/g/n Wi - Fi
- Windows 7 Home Premium 64-bit
I intend using an external SATA 7200 RPM hard drive as my Media Player.
Thank you
Lisa Segal
For HDV formats, you should be OK. Looks like a nice phone.
-
I have hp Pavilion 1241ea g6, no noise, but work with external or a helmet
I use mostly external speakers with me laptop, yesterday I unplug my external speaker, but there is no sound from the internal (on-board) pregnant and my warranty until 12/2012. Please give me a suggestion, or any other solution than what happened with m y laptop (works with headphones)
HP-Pavilion 1241ea G6
Windows 7 64 bit
Sound problem
Hello
Try the following.
First, unplug all external hardware attached to the computer, including your external speakers.
Then download IDT Audio Setup on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you're done, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you have now the audio through your internal speakers.
Kind regards
DP - K
-
IWeb will work with OS 10.11?
I tried to run my copy of iLife ' 08 iWeb (v. 2.0) to El Capitan on my Mac Pro and seem to have problems to use it from the beginning. I suspect that it was designed for PowerPC and that it is not compatible with Intel. Is this a known issue?
Otherwise, I always have my 10.4.11 (Tiger) G4 running operating system and want to use iWeb to build a site on it. I have looked around in the help of support here and see recommendations to spend more to update, the creators of commercially available (and expensive) sites, but other sources suggest iWeb is still used. I built a site with it under Tiger, about 3 years ago, and it was fine (although now taken down). Would like to know in advance, if possible if, after spending the time to build the site, I can actually put it online (my domain to my site Web Yolasite name change). I am skilled enough with the Pages, I like working with iWeb for ease and similar flexibility.
Thank you
This is just a screenshot of what past when I open iWeb and chose the model of 'modern' framework - which is not at all what I expected (and I also had problems to enter content in the text boxes, problem with the color, which was negative, and that's all, when I leave!)
iWeb 08 certainly do not work and yes that is why you have problems with it. At least, most of the people updated their iWeb to use iWeb 09, which is version 3, however, you may be out of luck if you want to buy is not been sold or supported by Apple for the last 4 years or more and has not been updated for 6 years.
The only way you can get iWed 09 is to look on Amazon and see if they have the old iLife 11 or iLife 09 converted (boxed) sets for sale that both contain iWed 09, however, I don't see that it's wise to spend money on an expired product somehow.
At some point, you'll have to buy another software, because there will come a time where iWeb work not at all, as you have already discovered with iWeb 08. There is nothing that you can do with iWeb 08 and you will have to go back to your old machine if you insist on using it.
Unfortunately, you will find that all new software will be of a similar price and EverWeb are priced at £79 is in no way over the top. Is an also smaller learning curve, because it is very similar to iWeb next, feeling and function.
You can take a look at the Freeway Pro/Express - they sometimes offers that make it more affordable and I have to tell you that Freeway is more expensive than EverWeb - they had an offer on last year, where you could get Freeway Pro for £69. Take a peek inside.
There is also a flow 6 or 4 WebAccapella you can take a look at, but at some point, you'll have to bite the bullet and spend.
Nothing you can do with iWeb 08 - go back to your original like that computer won't work with something else.
-
Recently, I buy a new computer dell laptop... There Gilbert win8
Recently, I buy a new inspron to computer dell laptop 15 with win8. So anyway my os will be corrupted what am I supposed to do. How do I reinstall win8?
You have two options:
If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.
To do this, follow these steps:
· Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)
· Click settings
· Click change PC settings
· Click general in the left column
· In virtue remove all and reinstall Windows, click Start
Then follow instructions that will be provided on the screen to reinstall Windows on your PC.
You can also create a disc of recovery right now:
-
- I have a Canon 32-bit multifunction printer that worked with my old laptop. Again 64-bit works more computer portable printer nsns, what I can do.
Hello
Go to the Canon Website and search for your current operating system 64 bit printer drivers.
If none are available, it may be time to upgrade your printer.
See you soon.
-
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
-
wifi card does not work (asus laptop computer x53e)
Hello
I have laptop asus x53e sx1444v with Wi - Fi card inside. It was running Windows 7 Home Premium, but something was wrong with the system, so I reinstalled it completely. After you have installed all the drivers and updates from Asus, I discovered, that the wifi does not work. I tried all the drivers on the Asus Web sites, but nothing works. In Device Manager, it is listed as a network controller, but it is listed as unknown device. If I try to install the driver, it is listed as network card, as it is, but it has the error code 10 (this device cannot start).When I started to live linux, the wifi adapter works withnout any problems.The wireless card is intel 11230bnhmw (more info printscreened http://ctrlv.cz/mJMd here). I searched for the drivers but still nothing works listed as network controller.I tried to put the card and plug it into another of the HP laptop, it works in linux, but the same problem under windows.What should I do to make it work on Windows?Thank you.(Sorry for my bad English)I decided to change my OS, now I am running windows 8.1 and wifi card is working automatically, withnout need to install any driver.
-
Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok
Hello Ronald.
A problem are not uncommon. Something for you to try:
Let me know if this solves the problem for you.
Kind regards
BearPup
Maybe you are looking for
-
Dear Apple,I use A142, long dyja 16bg ipad always update apple new operation software.when used iSO9.3.1 my ipad was good running... but when I update iSO9.3.2 my iPad was looking FOR auto running without any touch to new update iSo9.3.2. I iSO 9.3.4
-
Yes, it's a "non-windows" - regarding the issue, but I hope that someone here knows or uses Skype and can answer this fundamental question. A new version can be installed on an older version or the previous version must be uninstalled manually first?
-
HP 14-ac100nv: 14-ac100nv HP power-on password reset
Greetings to all! I have a HP laptop 14-ac100nv and I forgot the password to powered... How can I get it back? The stop code is 60241169. Thank you!
-
Hello, I use a notebook compaq presario v3700 series with pre-installed Windows vista 32-bit. The problem is that this os is recently freeze when I try to start a program, connect to the internet or I do nothing it still freezes up. I can even restar
-
Is it possible to create holes in capacity planning to HFM to end of PeopleSoft?
Usually this drill is not possible because the current version of FDMEE, she cannot use HFM as the source. Am I wrong in this assumption? But is it possible to achieve through customization possible? How users planning allows to drill holes in back t