Computer backup error

Similar Questions

• my computer backup error

  I have a hitachi 2 TB USB 3.0 touro. I can't get to back up my computer, am getting error 0x8078002a. I noticed no problem similar but with a hard disk that is larger. I would like to know if my hard drive has a solution that I can use to back up my computer or if I should just return.   Thanks in advance.

  Hello

  Thanks for posting in the Microsoft Community Forums.
   
  We're here to help and guide you in the right direction.
   
  Help me with little information.
   
  1. what version of windows you are using on the computer?
  2. what anti-virus program you installed on the computer?
  3. using backup windows or any other third-party backup program?
   
  
  Try these methods and check.
  
   
  Method 1
  Check the status ofVolume snapshot service. If it is started, then tryrestarting the volume shadow copy service and check.
  (a) click Start, type services.msc in the start search.
  (b) search for the shadow copy Volume service.
  (c) make a right click on the Volume Shadow Copy service (VSS) and select Properties. Check if it is started.
  (d) if it is stopped, select start or restart. Make sure that the service is started and set as automatic.
  (e) click on apply and OK, if you make changes.
   
  Method 2
  I suggest do a clean boot and then try to save.
  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
   
  Method 3
  Temporarily disable the security software and check if it helps.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
   
  See the help article:
  Back up your programs, system settings, and files on external hard drive.
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files
  Backup and restore: frequently asked questions.
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• 0x8100002f error code when computer backup Windows 7 Ultimate 64 bit

  I get the error code "0x8100002f" whenever I back up the computer. The arrivals of computer backup, but ignores certain files. I have Windows 7 Ultimate with 64 MB.

  Thank you

  Hello

  1. When you try to save backups to?

  2. you save files on the local computer or a network location?

  Please follow the below link to help solve the problem.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

  Hope this helps

• I have to shoot for the repair of logmein. My computer application errors a crashes and I can not remove features of logmein.

  As the title explains, I fell for the service repair errors.  They were in my computer for 8 hours.  I cancelled the service, but my computer doesn't work right since the.  I found a logmeinprinter and cannot back up my computer.  Error code 10010, 7000,7009,6008,3013,4104.  Code 0x800700AA and 0x8007001F another failure of the backup.  Another event: the hash map cannot be updated.  Systemindexlog.  I'm trying to figure the comexp.msc, but I don't know who to allow.  East access remotely on a single line.  Please, if anyone can help with 1 or all, Please HELP.

  Hello

  NEVER give anyone a remote access to your computer

  that your system has been compromised, I suggest that you change your information of credit cards and banking passwords and reinstall the operating system

  they wanted or money on your part for programs without value or make an identity theft on you to get even more money and get your internet banking passwords and credit card by obtaining information allows you to download the software to 'fix' or 'test' for your computer or install via remote access

  read this:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  Microsoft has none of the unsolicited telephone calls to help you fix your computer

  In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

  Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

  Treat all unsolicited sceptically telephone calls. Don't provide personal information.

  If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

  If you are a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.

  ___________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005

  original title: error message

  I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005. How to overcome this please? Thanks for your help. Kay Alexander

  Hello

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• backup error OX900700AA failed

  I'm doing a (first) backup on a laptop using Vista but I get the
  Backup error failed # OX900700AA. What ca I do you?   Thank you very much

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Backup error: "error 0x810000ED while doing Backup, error:"backup could not verify your backup settings.

  I recently did a system restore and now my scheduled backups fail. the error that says that "0x810000ED error while doing Backup, error:"Backup could not verify your backup settings"also my backups are scheduled for backup on the DVD edrive.» When I tried to change that there is no choice of road. Vista premium is the opsys. I think that the backups fail because there is no disk in the drive. I think that she previously saved to my second partition on the hard drive. I think bad?

  Hello

  backups must be stored on an external hard drive or DVD

  There is no backup point on another partition in case of disk failure hard as everything will be lost

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows backup error: a snapshot could not be created. Error code: 0 x 81000019.

  Original title: Windows - no system reserved partition backup error

  Whenever I try to back up files by using the backup utility Windows 7, I get the following error message:

  "A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information.
  "Details: the specified object could not be found" error code: 0 x 81000019

  The backup utility starts and says is 'create shadow' fails.

  In the research forums, I find a common solution to the increase in the size / cleaning of the system reserved partition.  My problem is that the system reserved partition does not exist on the computer.  The computer originally had Windows Vista and upgraded to Windows 7 x 86 Ultimate SP1.

  Is it possible to get Windows 7 backup to work without a system reserved partition?  If not, is anyway to create a system partition reserved without wiping the hard drive and reinstalling everything?

  Hello

  Thanks for the update.

  I ask you to answer these questions:

  1. the computer is connected to a domain or a group of House?

  2 NAS hard drive is located on a different computer?

  If the computer is connected to a domain, then I ask that you post this question on the forum of TechNet at following link:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  Please get back to us with answers.

• Windows backup error 0 x 80041321

  * Original title: backup error

  I am running windows 7 and when I try to back up my computer I get an error saying (task image is damaged or has been tampered with error

  0 x 80041321 how remedy.

  Review:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-can-i-fix-back-up-problem-after-reverting-back/c93be561-b69f-450e-AA80-e303e9ff67e7#LastReply

• Backup error Ox8100002F code

  After the backup to an external drive, some files have been ignored. Investigation, backup error code
  Ox8100002F led

  Hello
   
  The error message indicates that the backup was successful, but ended up jumping places as he could not locate them. So I guess you must have changed the location of the folders listed in the error message.  This is why the corresponding library was not accessible using the EXPLORER User Interface.
   
  To work around the problem, try this:
   
  1. click on 'Change backup settings' of the troubleshooting dialog box.
  2. expand the node of the user whose libraries are reported as ignored.
  3 deselect the library which is at the origin of the problem.
  4 expand the 'Computer' node in the tree, and then select the redirected folders location.
  5 save settings.
   
  A more in-depth review are visible to:
   
  Backup of Windows 0x8100002f error code
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/148b768b-4a25-4c05-A333-447a487d0a44

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Windows 7 backup error: 0x800703EE.

  backup error Windows 7

  I tried to back up my files on DVD (DVD-R) and it fails. I get this error code: 0x800703EE.  going on what?

  Hello

  Method 1:

  Temporarily disable antivirus software and firewall on the computer and then proceed to run the backup.

  Note: Make sure that you his turning the antivirus software and the Windows Firewall later to make the computer protection.

  Method 2:

  If you are not able to perform the backup on a CD/DVD, then perform the following steps:

  a. If you have any third-party CD/burning DVD, temporarily Uninstall the same.

  Note: Make sure that you have the installation for later re ference files.

  b. open the convenience store hardware and devices to run the automated troubleshooting services.

  i. click on start, control panel

  II. in Control Panel, click System and security

  III. in the window system and security, in the center of the Action, click on solve common computer problems

  IV. in troubleshooting computer problems window, click hardware and sound and under device select reading and burning CDs, DVDs and Blu - ray discs to diagnose and fix a problem automatically.

  v. try to perform a backup now and check if it works.

  c. Uninstall and reinstall the existing drivers.

  i. Click Start and then click Control Panel.

  II. click System and security, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  III. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  IV. When you are prompted to confirm that you want to remove the device, click OK.

  v., restart the computer.

  VI. after restarting the computer, the drivers will be installed automatically. Then check if you are able to backup after that.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to take backup, Error 80070002 in Windows 7

  Original title: backup error 0 x 80070002

  Hi, I checked on a large number of posts and can't find the answer. I tried the FIX, but it is NOT APPROPRIATE for my computer. I looked at the profile registry settings, and they are all ok. I turned off MS SECURITY ESSENTIALS and run the back-up and it always fails. I also did a scan (and check and fix errors) the disk backup and the C:\ drive. Out of options! Hand out and buy third-party software, is there another way to get this problem corrected?

  Thank you. I does no significant changes to the computer and have only been using it normally. The error message when I developed it was: THE SYSTEM cannot FIND THE SPECIFIED FILE. Error CODE: 0 x 8007002 with the time and location of the backup. I read the error log and it mentions a file that it could not find, but the file is there. Whenever I run the back-up and it failed, the error log under a different file name - but was there, every file on the computer.

  I tried method 1 and went for scenario 3, but he said that the program was not compatible with my machine. I ran the SCAN DISK via C:\ > PROPERTIES > TOOLS > ERROR CHECKING and it was very good. I tried to run the back-up every day with the same error message.

  However, yesterday (2 weeks after it stopped working) it was the day that the back-up functioning normally and it worked fine. So although I now have a back-up job I really did nothing to fix it, it just fixed itself.

• performing backup error Code: 0x80071AC3 need to format NTFS

  try to backup

  Iomega desktop drive usb2 hard

  format system asked to continue

  format does not have NTFS

  only ex FAT

  Error code now 0x80071AC3

  cannot continue with the backup

  I added an iomega desktop hard drive, the system asked me format may only need of presentation in ex FAT NTFS to make my backup, error Code: 0x80071AC3 now can't go back to my new HDD desktop please help

  Hello

  1. you try to take backup using Windows backup?

  2. what security software is installed on your computer?

  3. have you made changes on the computer before this problem?

  4. were you able to create a backup successfully earlier?

  5. are you able to format the Iomega hard drive to NTFS?

  I suggest you try to check the drive for errors and check if it helps.

  Check a drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  See the following Microsoft article and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-do-i-format-a-hard-drive-to-NTFS-in-Windows-7/a18948c1-ca88-473c-85d0-eda64b94a730

  Please provide us with more information, so that we could help you to solve the problem.

• "unable to complete backup" error Code 0 x 80070002

  Original title:

  Error 0 x 80070002

  Windows 7 Home Premium Version

  Seagate external hard drive / software Acronis

  I am unable to complete my WIndows 7 Home Prem to backup on my Segate external drive.  63% in the backup, I get "unable to complete backup" error Code 0 x 80070002.  How can I get my support to end?

  Hello

  Welcome to the Microsoft Community Forums.

  From your post, it seems that the backup is not complete and give you an error code: 0 x 80070002.

  Quick questions:

  1. What is the full error message?

  2. how many profiles user is there is your computer?

  3. What Backup program do you use?

  This problem may occur if:

  Cause of scenario 1

  This problem occurs if you save a library that contains custom folders that are located under your user profile.

  Cause of scenario 2

  This problem occurs if the following conditions are met:

  ·         Backup Windows tries to back up files in folders LocalLow, Contacts and research.

  ·         These files are not present on your computer.

  Note These files are only created if certain applications are installed on the computer.

  Cause of scenario 3

  This problem occurs if the following conditions are met:

  ·         The computer has an NVIDIA USB EHCI Enhanced Host Controller Interface () chipset.

  ·         The computer has at least 4 GB of RAM.

  ·         You try to copy data from the computer to an external USB storage device.

  If you use the Windows backup program then please go and follow the methods mentioned below and later a update on the State of the question.

  Method 1: 0x8100002F error code and error code 0 x 80070002 when you back up files in Windows 7:http://support.microsoft.com/kb/979281

  Method 2: Try to run the check disk on the system using the link below.

  Check your hard drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope that it helps post back if you have questions about Windows and we will be happy to help you.