Computer beeps the opening and closing of the session.

A few weeks ago, that I started to notice that when I logged in to Windows (not at startup, but when connecting), when I logged on Windows, or when I locked the screen, I received three beeps through the speakers, not the mobo. These are in addition to any other sound is played by Windows at this time. The computer works fine, and all "systems" are looking good. Yet once, is not beep codes that you would hear at the start, it seems to happen at the opening session, disconnection and screen lock. Any ideas on what could be the cause?

Thanks for the reply. It might be a programs or drivers installed on your computer that is causing the problem.

Please run your computer in safe mode and check if problem still persists. To start your computer in safe mode. To do this, please follow the steps below:

1. restart your computer.
2. press and hold F8 before the Windows logo appears.
3. Select safe mode using the arrow keys, then press on Enter.

Let us know how it goes.

Tags: Windows

Similar Questions

  • RESTORE THE JINGLES ON MY COMPUTER DURING THE OPENING AND CLOSING OF MY COMPUTER

    I GET A GRUFF TONE TO DRAW MY ATTENTION TO ONE WE SCREEN MESSAGE/QUESTION - I FOLLOWED THE ANSWER I GOT, BUT CANNOT RETRIEVE MY JINGLES.   HOW CAN I GETT JINGLES AT THE TIME WHERE THE OPENING AND CLOSING OF MY COMPUTER?

    Is JINGLES default windows sound? Do a system restore

  • How to stop windows during the opening and closing of the discoloration

    Windows until today used to break open and closed but now that they fade in and out.  Is there a setting that would avoid this?

    Hi Dmkg,

    1. when exactly this problem occurs (it is the opening of any application or is it when the computer starts and stops)?
    2. Since when are you facing this problem?
    3. any recent change in software/hardware on your computer?

    Method 1:

    Try to perform a system restore to restore the work correctly the settings

    System Restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
           
    Method 2:
       
    Try the following steps:

    a. click on Control Panel.
    b. click view by: large icons.
    c. click on "Performance Information and tools".
    d. click on adjust 'Visual effects '.
    e. There will be three points on the line indicating the word "Bland" as the first string of characters on each line.
    f. uncheck the box in front of each of these three lines and then 'OK' everything and regulate
     
    Also be sure to animate windows when reduced and enlarged is checked
        
    Method 3:

    I recommend you perform the clean boot.
     
    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Box opening and closing constantly on the toolbar

    A box keeps opening and closing on my toolbar, every minute or so. Until I'm able to click on it or to say that it was his party. I have not downloaded anything so I don't know if its a sort of virus. The computer is a week and I've done virus scans and nothing was found.

    Finally found the culprit! Start the computer in safe mode and run the malwarebytes scan found the question. Thx for your time and help!

  • How to remove the sound notification of opening and closing foxfire

    Whenever I open or closed foxfire 36.0.4 I hear a gong, would like to turn off.

    Thank you all, just fixed it. I have pro with sense of power system mechanic.
    It has a checkbox for the sound notification. Uncheck and bong went
    opening and closing of firefox. Still don't know why he touched just this one
    browser and not others.

  • Since upgrading to Windows 10, nd despite reinstall Lightroom, Lightroom from the Creative clouds just keeps crashing.  I've now reached the point that I can't export and must work only on 1 image at a time and keep constantly opening and closing

    Since the upgrade to Windows 10 and despite reinstall it Lightroom. Lightroom from the Creative clouds simply crashes.  I have now reached the point that I can't export and only works on 1 image at a time and constantly keep opening and closing of the software

    Hello

    Please go the Edit option in the library Module, then go in the preferences.

    Go to the performance tab and uncheck the option "use graphics processor.

    Restart lightroom, and see if Lightroom works.

    Please let us know if it helps.

    Kind regards

    Tanuj

  • DVD disc drive tray keeps opening and closing constantly

    FOR WINDOWS VISTA HOME PREMIUM EDITION

    DVD CD ROM DRIVE TRAY KEEPS OPENING AND CLOSING CONTINUOUSLY - GET COMPUTER TO READ DISCS AT ALL - OTHER ASPECTS OF THE COMPUTER RUN FINE - DIAGNOSIS SAY THAT HE DIDN'T THERE HAS NO PROBLEM WITH ANYTHING.
    IN DEVICES, I NOTICED THAT DEVICE DRIVER IS FOR ARCSOFT - THIS UNIT HAS BEEN IN FOR REPAIR, AND I ME ASKING IF IT WAS CHANGED FROM MICROSOFT DRIVER AND WHY? REPAIR SERVICE DID NOT WARN THIS CHANGE.
    CAN ANYONE HELP.
    SAPPHIRE.

    The device driver can say Arcsoft because it may have provided to Microsoft by them.
    In Device Manager, open the Properties window for the drive, and then click the driver tab, then update driver...  Click the search selection automatically. If it finds a driver, let it install.

    If the drive still cycles, then you can have a bad drive. If it is still under warranty, contact the place of repair for repair or replacement.

    SC Tom

  • My drive E guard opening and closing

    E cd/dvd drive keeps opening and closing without disk in it. Whenever I close it it just opens again

    Hello

    1 did you change on your computer?

    2 did you receive an error message?

    3. what type of device is your E drive?

    Method 1:

    I suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to follow the link and check.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/314060

    See also:

    Optimize Windows Vista for better performance http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

  • My programs are opening and closing slowly

    Member of the expensive Microsoft Answers Community:

    My programs are opening and closing slowly from last night. Do you know why this could happen and if 'yes', what can I do to solve it?

    Deepa

    Hello

    Troubleshoot using these methods and you can try a system restore which I wouldn't do unless
    nothing else has helped.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ==========================================
    ==========================================

    Only if necessary and then you run back through the above (including the drivers once again) anyway.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Menu start keeps opening and closing and opening several times. Can you help me?

    My Start menu keeps opening and closing and prevents me from doing anything.  Do you know what I can do to fix this?  I don't am not technical at all so would like answers that are easy to implement, if possible.

    Thank you.

    This could be a problem of keyboard with the Windows key.  If it is a desktop computer, try another keyboard. When a laptop that will be more difficult to test. Looking for debris or rigidity.

  • Remote Desktop disconnected. The remote computer disconnected the session because of an error in the licensing protocol. Try to connect to the computer again.

    I understand there is a patch to 'fix' it, but I don't know how to access.  Can anyone help?   Thank you.

    Here is an article on this problem with a proposed solution - although it seems a bit risky.  I would create a point system restore and backup of the registry before trying. http://kjctech.net/2009/06/12/the-remote-computer-disconnected-the-session-because-of-an-error/.  The same answer is given by Microsoft here: http://support.microsoft.com/?kbid=187614.

    Here is an another artidle which includes essentially the same correction (although I didn't check closely to see if they were the same): http://www.techbuzz.in/how-to-fix-the-remote-computer-disconnected-the-session-because-of-an-error-in-the-licensing-protocol-in-windows-vista.php.

    The thing is, I can't find a clear answer, if this applies between two ordinary computers or between a server and a computer.  I hope that the solution works in both cases.  If this isn't the case, you can still use the system restore to go back to the old situation and we can try to find another solution.

    I hope this helps.  Keep me posted.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • CD drive keeps opening and closing by itself

    My CD tray keeps opening and closing by itself. In addition, I can't open it in the button, I need to go from my and eject it.

    I checked the bios and everythings fine; even updated.

    I removed the front panel

    I scanned with MalwareBytes malware; A large number of files but no associated with cd player

    I went once cd players

    I pulled the canned air into the lens

    That's all I did, to no avail.

    I came to the conclusion that it is a virus, because it is not that when starting and I can push the button to open it, even in safe mode.

    Although no antivirus can find it, and I can't find anything winscript/wscript in the Task Manager.

    Help, please.

    Thanks for the reply.

    1. the model is Packard Bell imedia S3840

    2. No, apart from the installation of the Sims 3, if you count that.

    3. I want to say that the problem still persists in Mode without failure.

    Method 1: Did, did not work.

    Method 2: Still did not work; I remember doing a couple of weeks ago, when he started.

    Method 3: I've updated a long time ago already (like I said: "updated")

    Thanks for the reply, but I've already fixed:

    The button to eject the disc has been blocked; and I had to go out for a minute and then put it in.

    Thank you!

  • Leaves open and closing signals do not seem to work

    Of the clues as to what special qml/qt/cascades magical thing you need to do to get the sheet open and closed signals to deliver?

    The Basic code fragment is

    Sheet sheet is iNewSheet-> Construct();.
    bool ok = connect (sheet, SIGNAL (closed ()), this, SLOT (onSheetClosed ()));
    Q_ASSERT (OK);
    OK = Connect (Sheet, signal (Opened ()), this, slot (onSheetOpened ()));
    Q_ASSERT (OK);
    sheet-> open();

    Both links it seem to work - as in there is no assert.

    The sheet is open ok, but no signal is transmitted

    The sheet can be closed ok, but no closed signal is transmitted.

    We also tried the openedChanged() signal, but that doesn't seem to be delivered either

    If any readers

    No idea what we have changed but the

    Plug finished animation + is now open and the

    Care ended animatng + is now completely closed

    signals which do not seem to work previously now work.

    We can only guess its something to do with the parameters of the method 'connect' or maybe the location of the statements of breeders or possibly using "Q_SLOTS" and not statement 'niche roles' or some other thing random Qt that would be taken by either the preprocessor, the compiler C runtime connect() returns value or other tools applied to the CBC to he mangle in Qt code.

    What exactly is the problem with normal standard C++ interface inheritance for most of these?

  • I get Aero Lag when opening and closing windows in Windows 7

    original title: Aero Lag when opening and closing windows in Windows 7

    UPDATE!

    OK because here we have the ball, I'm changing it to better reflect what is happening. The links below are some of the hundreds of post, will find you on the internet about this Aero lag. Some offer workarounds and some are not. I just googled Aero Lag and it was on the first page.

    If you have the same problem, please provide:

    1. what kind of graphics card you have.
    2. what kind of driver are you using (Win7 preinstalled or drivers from the manufacturer)
    3. your version of Win7 has an update or a clean installation.
    4. what motherboard you have.

    From the sounds of it, Microsoft is looking for a solution.

    I also ask for the forum administrator to make a sticky like many people is facing this problem.

    -Randall

    http://www.SevenForums.com/performance-maintenance/22313-Aero-lag-good-system.html
    http://www.SevenForums.com/graphic-cards/21250-Win7-Aero-Windows-have-choppy-delay-when-opening.html
    http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/a013396d-8953-4E32-8D13-f2d119cd730d
    http://www.flamehaus.com/BBS/-vp3478764.html
    http://www.YouTube.com/watch?v=YKNj_90E_PI

    http://www.hardforum.com/showthread.php?t=1465844
    http://windows7forums.com/Windows-7-hardware/1549-Windows-7-video-lag.html
    http://windows7forums.com/Windows-7-software/23315-gaming-video-lag-choppyness.html
    http://windows7forums.com/Windows-7-support/5287-Aero-lags-when-open-new-programs.html
    http://Forum.EeeUser.com/viewtopic.php?id=66007
    http://www.Neowin.NET/forum/lofiversion/index.php/t787172.html
    http://www.YouTube.com/watch?v=YWdVrSUhvLE

    Randall

    Solved my problem with Aeor lag.

    Reinstall Windows 7 U64 twice with the new/old driver.
    Replaced Gforce 8800GTX with Gforce GTX480.
    Spent several days on this problem without solution.

    But here's a very simple solution that works for me.

    I removed the USB extension cablefor my CreativeHS - 1200WirelessUSB Gaming Headset.

    Aero lags when extension Iused USB and headphone load.
    Without extension USB cable, all right.

    So he thinks it's a USB extension cable voltagedrop, forces the system to lag. ?

    Hope this can help.
    Sincerely,
    Dennis Psilander

  • Find and replace tags opening and closing

    Is there a way to search and replace the entire tag in dreamweaver?

    I want to take away all of the < span > tags in the document because it is an epub. But some of the <>spans are for the body and some are for another hairstyle, in this case italic. I can go through and just find and replace, but then who would only replace the opening < span > and not closing </span >, leaving a lot of open tags < em > to sift through. There are currently more than 1,500 cases of italic text in the book and I won't have trouble all by hand. What I want to do is to find the particular < span > tag and replace < em > < /em > both the opening and closing.

    Here is an example of what I'm trying to do:


    To find:

    < span class = "CharOverride-4" > < / span >


    And replace with:

    < em > < /em >



    How do I get there?


    Thank you

    If you use the Search Tag he finds tags opening / closing and replaces them with opening and closing .  Please see my screenshot again.

    Nancy O.

Maybe you are looking for