Computer continues to show the wrong time after resetting it

Original title: wrong time

Continuing my computer clock display at the wrong time is after ive reset it, after a while he looks at the clock and won't again.

I would like to know how to solve this problem please before hand I'd like thank you for your help, so thank you, I'm really glad help you n im very grateful.
s. wood j

Check your regional settings in the control panel. Make sure that your time zone is set to which your PC is actually in.

If your time is changed after turning off the PC, it can be that the battery of your PC that keeps your clock "ticking" is dead and must be replaced. For desktop computers, it will almost certainly be a CR2032 and be something relatively simple to find and replace. for laptops, maybe it's not a CR2032 and may be very difficult to find and replace. Whatever it is, when in doubt, consult a technician, ideally one that you can get a recommendation for. I would have thought 10 dollars (including the battery) had to do for a desktop computer. A computer laptop pourrait be much more expensive, both for the battery and work.

Tricky

Tags: Windows

Similar Questions

  • Why my iPhone showing the wrong time zone?

    Why my iPhone showing the wrong time zone when it is set to automatic? When I put it manually, it is fine. Is this a bug in the iOS 9?

    Try to activate your iPhone location service before

  • HP Officejet 4630e all in one: the time on my printer display shows the wrong time

    The clock on the display shows the wrong time.  Does anyone know how to rectify this please.

    Hello

    The date and time settings would cause problems of synchronization with Eprint if incorrect. The date and time should be accessible from the Preferences menu.

    Try this

    Power reset

    1. Without putting off the product, disconnect the power cord from the back of the product.
    2. Wait 30 seconds and then plug the power cord into the back of the product.
    3. If the product is not already on, press the power button to turn it on.

    Now, try to change the date and time and check.

    Where this fails, try this

    Setup > tools > restore defaults

    Try to set the date and time of return

    NOTE: This will remove network also settings so you need to redo the configuration of the network

    Measures to restore the network configuration

    http://support.HP.com/us-en/document/c03834108

    Although I am an employee of HP, I speak for myself and not for HP.

    Click on the thumb BRAVO upwards on the left to say 'thank you '.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  • Eastern time zone shows the wrong time

    I just set up my RT Surface and set the timezone in the East (Eastern US & Canada).  The time is incorrect display... an hour later than planned.  Is this a known issue?  Is there a solution?

    Modified manually the date with the Date time & app.  This action was the only thing that worked.

  • The time on the clock continues to change at the wrong time.

    The time on the clock continues to change at the wrong time.

    First of all, make sure that your clock is set to the correct time zone.

    Right click on the clock.

    Select adjust date and time.

    Then select change time zone.

    If your time zone is correct, you may have a bad CMOS battery but you can get around it by having the system more often with the internet time synchronization.

    1. Go to start
    2. Success and type task entry
    3. Click the arrow on the left next to the Task Scheduler Library
    4. Click the arrow next to Microsoft
    5. Click the arrow next to windows
    6. Click the folder to synchronize the time
    7. At the top right click on Synchronize
    8. Click on properties
    9. Go down and check run with highest privileges
    10. Click the triggers at the top tab
    11. Double-click the trigger that is listed in the box of
    12. On the top of the page task Begin at startup
    13. Uncheck delay task
    14. Check Repeat task (change in 5 minutes)
    15. On the right hand side change indefinitely the duration of
    16. Click OK twice

    Exit Task Scheduler

    Turning the computer off and see if it works

    By clicking on the White Star congratulations on the left is a way of saying thanks!

    I hope this helps!

    Nice day.

  • my computer continues to change the date and time

    my computer continues to change the date and time even after I set it correctly. I am running windows 7 Professional. Thank you

    Hello

    ·         Since when are you facing this problem?

    ·         Did you the latest changes on the computer before this problem?

    Method 1:

     

     

    The date and time in the BIOS settings may be incorrect.

    Important: Change BIOS (Basic input output system) /(CMOS) complementary metal oxide semiconductor

    Settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    You can see this:


    Incorrect time is displayed on 64 bit versions of Windows 7 or Windows Server 2008 R2 after upgrading on-site

    http://support.Microsoft.com/kb/2001086

    Method 2:

     

    I suggest you replace the CMOS battery. If you are not comfortable with that, then I suggest you to contact the manufacturer for assistance.

  • BlackBerry 9000 "BOLD" My Smartphones continues to dial the wrong number

    It's showing the wrong numbers when I'm looking for no - resource in contacts. It shows the wrong number, but under the name I'm looking for. 3 - 4 times I called the wrong person because my "BOLD" was and wrote a different name number, so that I'm looking. I don't know how to solve this problem.

    When I type the name of the contact that I'm looking for my 9000 "BOLD" displays a list of contacts as usual, but does not have the phone number of the contact. I select another name on the list then scroll to the name that I wanted to get the phone displays the correct phone number. I have used this phone for some time and had always worked very well. This problem started yesterday. I will not sync the phone (have never, probably never will be). I have not modified or added to any software. The only thing I've done recently is added more contacts.

    I also noticed that it is slower than usual when you search for names and it takes a long time so he can recognize that I typed more characters in the name of the contact before you can update the list of results.

    Perform a restart of the device: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

    See if the problems continue. If they, I can't explain it, it looks like you may need to change your contacts and correct errors.

  • take the cos(pi/2) shows the wrong result in swift

    take the cos(pi/2) shows the wrong result in swift but when I take the sin(pi/2) it shows the correct result.

    I'm messing around with math to swift before that I use it in my application but I'm having a problem to calculate the correct results with cos at 90 degrees, pi/2 radians and 270 degrees, 3Pi/2 radians.

    the results I get for cos(pi/2) are 6.123233995736766e - 17 when I know that it must be equal to zero...

    the same thing happens as well with the seizure of the sin (pi), sin (0), the sin (2 pi) and so on.

    6th-17 is zero! After all, you didn't feed it pi, but an approximation.

    Welcome to floating point!

    "The floating-point operations is like moving a lot of sand. "Whenever you move one you lose a bit of sand and pick up a little dirt".

    Kernigham and Plauger

  • Clock showing the correct time to almost every time when connecting

    Original title: clock wrong, lot of time whenever I connect

    My clock is constantly with the wrong time almost every time I connect and I have to readjust it.  Can anyone help?  Also, I tried live help, but for some reason that Microsoft would not accept my product key, I know it's the right key.

    I also seem to lose my time 12 settings of the clock all the time too, and he keeps returning to the 24 hour clock that I hate.  And I often do not remember how I changed it in the first place to return the parameters of what I want.
    Any help appreciated.
    Help with my product key I type in directly from the email that Microsoft sent me live also really curious to know why I can't get online?

    Try this workaround:

    1. Type "schedule tasks" in the search field of the start screen of windows or via the menu of charms and open it.
    2. Expand - Library of Task Scheduler > Microsft > Windows and you will see - synchronization of the time, almost at the bottom of this list.
    3. Double-click the "SynchronizeTime" task and go to the tab "triggers."
    4. Click 'new... '. »
    5. You will see a drop-down list next to the text that says "begin the task:" at the top of the window. Select the option "at startup" and click "OK" to save and close the relaxation. You will then see your new trigger on the list in the task. Click 'OK' to close the task.
    6. Close Task Scheduler.

    Time system MUST synchronize now to start and pretty much solve this problem. There may be a delay while your computer connects to a network. Time synchronization may not work if your clock is off by a significant deviation from the server.

  • get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

    get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

    Hi James,

    Let me know if the problem persists.

    Kind regards

    Nicos

  • Slow to open the first time after startup apps

    Slow to open the first time after startup apps

    How about, the second time, that is, close and reopen?

    Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  • Firefox crashes while loading images for the first time after windows starts upward

    every time I log on windows, Open firefox and load an image or a site with content firefox flash stops responding for 2 or 3 seconds and then returns to normal after that and everything is fine... it happens only when I open firefox for the first time after starting windows to the top...
    thing I tried
    Start windows and Open firefox in safe mode (does'nt fix the problem)

    updated 13 solved the problem...!

  • What is the default time after which a temporary internet file is saved

    When we browse the net or write e-mails, temporary internet files are created and stored in the system. I want to know what is the default time after which a new temporary internet file is created for the same browsing session, especially when creating e-mail with attachments.

    When we browse the net or write e-mails, temporary internet files are created and stored in the system. I want to know what is the default time after which a new temporary internet file is created for the same browsing session, especially when creating e-mail with attachments.

    http://en.Wikipedia.org/wiki/Temporary_Internet_Files

  • I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

    original title: ACTIVATION of VISTA
    I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

    You simply have to use telephone Activation...

    activation by telephone (call of the operator)
    Click the Start button
    in the search box, type
    SLUI 4
    and press the Enter key
    Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you
  • How can I change the time on a printer of 8620. I selected inadvertently the wrong time during the Setup

    When you step through the startup process of the printer, I chose the wrong time (an hour out there).

    Without doubt, it is used in faxes etc. of timestamp.

    How can I change this? I tried the settings on the LCD screen and it has not found here?

    I also looked through the embedded Web server and couldn't find there either.

    Am I missing something here?

    Also, anyone know if this changes automatically for DST British & GMT?

    Thank you

    Hello Radar59,

    Please, let me take a moment to say 'Welcome' on the HP Forums.

    I hope you enjoy your experience!

    I see that you are looking to change the time on the screen of the printer.

    I'm more than happy to help you in this task.

    To change the date and time, simply press the time on the top of the screen of the printer and it will then give the option to change the time and date.

    It is the assault to make changes.

    Please do not hesitate to write me again if you have any questions or concerns.

    I hope you have a great Tuesday.

    See you soon,.

Maybe you are looking for

  • Duplicate the artist that don't WILL NOT disappear please help!

    Everything is identical on both sides, news-wise, I went through all the fields all fields sort everything. I even tried to change the name of the artist to something different, then change back, nothing has changed. The only difference that I could

  • Everything that you sizes math, here's one for you revisited

    Inspired by Greg I give you all an opportunity to resolve my problem for me Given the distance between tracks and standard forces solve for X, Y and Rho. Suppose I have write a simultor for the movement of a vechile followed some sort

  • upgrade processor f672cr

    I have an Aspire older, which is (APPARENTLY) a M1610.  The motherboard is a F672CR Acer's.  I would like to find that CP {possibilities could be upgraded U.  I currently have a Core2DUO Conroe @ 1.6 Ghz. CPU.  I've already updated the memory to 2 GB

  • Can I switch from Win7Home Premium Ultimate Online?

    Thank you

  • Lightroom 6 on a Mac and a PC

    I currently use Lr6 on my Desk Top Pro.  However, my laptop is a PC on which I would install Lr6.  What I have to buy a new download, or can I somehow use my current license?