Computer continuously beeps at startup but is not on (Compaq Mini CQ10-500)

Similar Questions

• Equium A200 - continuous beep on startup

  A colleague has spilled water on an A200 Equium and therefore it emits a continuous beep on startup. In fact, you get one beep, immediately followed another. However, if you press F1 it starts OK and all is well. I ran Diagnostics and found nothing wrong.
  The only problem is that one or two of the keys work fine if you lightly touch them.

  Someone has ideas about resetting the sound signal, or what I could do? Thank you.

  Andy

  Hey,.

  I think that it s is not easy to say why this is happening but maybe the water has damaged the keyboard and there so always will be in a hurry I don t he know exactly.

  I think that it is not so useful for you if we discuss it here without test and we don t have made real for your laptop should be checked by a technician of the laptop. Guys can make a detailed diagnosis and order spare parts.

  On the Toshiba site, you can find a list of good luck of suppliers registered!
  :)

• Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Original title:

  PC was unstable.  Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Jill

  Click Start

  In the start search box, type msconfig

  Click on continue if prompted for permission

  Go to the Startup tab

  Research of any startup item that refers to rdpclip

  If found, clear the check box to the left of this startup item, and click on apply

  Return to the general tab

  Select Normal startup

  Click on apply and OK

  Restart your PC

• My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program

  My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program. How can I fix it so the SLL laucher works.

  Sorry, it's a product of the gainful. I can't test it. Go to http://support.vocalocity.com/ for support.

• OpenVpn always connects at startup, but is not in the startup folder

  Hello

  I am running win 7 64 bit and OpenVpn still connect at startup, but is not in the startup folder. It remains in my taskbar on the low right. I use it occasionally when I am engaged in international voyages and need a connection to the United States. I already checked the startup folder and I have nothing in there.
  Thanks in advance for your suggestions.

  I had already tried this and it is marked as disabled. I can't understand this.

  It could be launched as a service, visible on the Services tab in msconfig. Be sure to hide all Microsoft services front to disable all other services. I would also create a Restore Point and burn & test a Windows repair CD.

• Date and avoid changes to my computer Compaq Mini CQ10

  HelloW Microsoft Community, I've got this Compaq Mini CQ10, whose battery is dead. Its CMOS battery also died and I took a step to replace since when I turn my pc off and disconnect the power adapter and plug it back, turn on I display the Date and time have changed. What should I do once more...?

  If the time and date is correctly set when the PC is turned on, but the sound is set incorrectly when the PC is powered extinguished/turned on, it is usually a sign that the CMOS battery has failed or has not been installed correctly.

  Verify that the CMOS battery is indeed a good and so its equipped properly.

• Pls I need help to reset my bios of my computer compaq mini CQ10

  Pls I need help to reset my bios of my computer compaq mini CQ10-130se

  error fatal problem with CNU0014WZF

  TNX!

  Hello

  Please try:

  For CNU0014WZF (two zeros after U).

  e9l113vd08 (all lowercase, 3rd tank is a tiny l)

  Kind regards.

• Pls I need help to reset my bios of my computer compaq mini CQ10. The error code is CNU9513HB4

  Pls I need help to reset my bios of my computer compaq mini CQ10. The error code is[personal information deleted]

  Hello

  Please try (all lower case):

  e9loq3fzpv (3rd tank is a tiny l).

  Kind regards.

• HP compaq mini CQ10 computer: enter the CURRENT password

  CURRENT PASSWORD: CNU0090HBQ

  computer HP Compaq mini CQ10

  Please TK

  Hello

  In this case, check the following points.

  The stop (generated after 3 erroneous seizures) code that you posted is correct.

  Enter you the code on a QWERTY keyboard.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Plug the power adapter (leave the battery for now), start Notepad and try entering the code again.

  Try entering the code via an external usb QWERTY keyboard.

  Kind regards

  DP - K

• Compaq mini cq10 wifi switch does not

  I had to restart my laptop and re-install xp and therefore all the drivers. I lived the complete list of the network in the list provided but still drivers cannot get the wifi switch to work.

  Any suggestions please?

  The model I have is:

  Range of PC Compaq Mini CQ10-101SA

  Hello:

  Here is the link for the driver you need and you'll be all set.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

• Satellite Pro A200: A continuous beep on startup top and freezing

  Hello

  It comes to Varun of India. Could someone please help me solve a problem which has been haunting me the last two days. This problem is currently arising in my Pro A200 satellilte. Actually, the problem is that one continuous beep sound from internal speaker at startup is when the name TOSHIBA appers at boot time and more it freezes it right of this screen. But, I still somehow using my system by pressing F5 or F9, and then let it start manually in NORMAL MODE.

  But, I can't keep doing this all the time. And what is more, this beep blows continuously only when the system is started and it will hang up within the same screen until I press F5 or F9. I did restore my system but no use. Could someone please help me in this.

  Sincerely, waiting for the answer...

  Verhoeven...

  Hello

  To be honest, it's very strange question. What is some external device connected to your laptop?
  Have you tried to update the BIOS to the latest version?

  Sorry, but I think that in this case, there is not a lot, you can do it. Perhaps the BIOS update, clean install of the OS. All that s.
  Maybe you should contact the closest service and ask what it can be.

• Continuous beep on startup that goes once connected - Satellite 3000

  I just brought a satellite laptop computer opportunity 3000-214, which worked well on the first departure to the top, but I turned it off then decided to turn right back on and now it makes a nosie continuous beep until windows load then stops. The machine then works perfectly since then. Any ideas.

  [Edited by: admin on 5 February 06 12:45]

  Hello

  You said that the unit stops Windows load. Is the unit freezes or stops?
  Have you checked the battery status? Try to remove the battery and after a few minutes trying to plug it in again. Try to start the device again.
  If this doesn't help the Toshiba service should check the laptop.

• continuous beep on startup and the black command screen

  I have problems with the boot on my computer laptop gateway. I bought it last year, and despite the update anti spyware and etc., he refuses to start after a black screen.it command refuses to go into hibernation mode is that drives me crazy. When I try to put it in this mode the red light that usually indicates the hibernation mode flashes 3 times faster and when I open the screen it displays the screen of welcome without a moments notice. is this just a virus? or is it something else. I don't have the keys sticky and I clean them every week and ran the antivirus program several times a week since I bought it.

  Hello

  Sound beeps are error codes that describe a problem with your machine. A continuous beep
  can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
  System/BIOS manufacturer.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  ----------------------------------------------------------------------------

  Are there any error messages? May be material.

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

• Acer Aspire V3-571, a continuous beep on startup

  Hello

  I have an acer aspire v3 - 571 that keep a beep on startup. I can get into Windows 7 by pressing "ESC".

  However, after I enter Windows and use my browser (mozilla firefox), the Web page is scrolled automatically at the end of the page. Despite manually by pressing the scroll bar and bring the scroll bar to the top of the page, just wedpage keep automatic scrolling at the end of the page.

  Initially, I suspect my wireless mouse was defective, but even after changing for wired operation smile, the problem persists.

  Now I am suspecting if the problem is the built-in trackpad or the built-in keyboard key 'END '. Please en; ighten me on what I need to do to solve the problem above.

  If it is a sound signal and go to page END...

  There are many more to check, take a look at your 'End' button, use a cloth with compressed air to clean up a bit.

• I have a canon shot power and my computer will display the photos but will not play videos

  When I put my memory card in my computer it will play my photos but will not play video. It says cannot play video and windows media ceter cannot open the file. can anyone help?

  When I put my memory card in my computer it will play my photos but will not play video. It says cannot play video and windows media ceter cannot open the file. can anyone help?

  ======================================================
  More than likely that the video is a format that is not supported on your system.

  Foe example... If the format is MOV, which is Apple's QuickTime format...
  It may be interesting to try to download and install Apple's QuickTime Player.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Apple QuickTime
  http://www.Apple.com/QuickTime/Download/

  Or you can download and install the free VLC Media Player which
  play almost anything:

  VLC Media Player playback features:
  http://www.videolan.org/VLC/features.html

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)