Computer died. Past from Windows XP to Vista. Lost Outlook Express mail folders. Not in Windows Mail. (Got 3 months of e-mail entering the transfer.) I can't the old Outlook Express files?
This is my first posting. Don't know how much has appeared in the "title". Computer died. Past from Windows XP to Vista. Lost Outlook Express mail folders. Not in Windows Mail. (Got 3 months of e-mail entering the transfer.) I can't the old Outlook Express files?
Have I lost the files of Outlook Express completely or is there a way that I can import them in the same way that e-mail came? My old computer died (power source grilled or something like that). I still have it, but no way to turn it on.
If you can access the old hard drive PC you can get the data of Outlook Express store. See this: http://www.oehelp.com/backup.aspx or this: http://www.insideoe.com/backup/ Brian Tillman [MVP-Outlook]
Tags: Windows
Similar Questions
-
If I accidentally put a block on all mail entering .aol accts where can I find tools for restore it?
Hello
I suggest to read the following steps and check if it helps.
a. open Outlook Express
b. Select tools, then select Message rules, click on the list of senders blocked in Outlook Express menu.
c. highlight the sender or domain that you want to remove.
d. click on delete. -
How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.
How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.
Here you go:
- Control Panel
- Network and sharing Center
- Manage wireless networks.
- Right click on the wireless network unwanted.
- Delete
Also note that since there is a network problem, a Forum that focuses on networking would be a better place to ask this question. This forum addresses issues of Windows security. -
can I use old .its session files in the new hearing?
can I use old .its session files in the new hearing?
Not directly, no - but there is a way you can import:
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Less error have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow the simple instructions but my absence I have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow simple instructions, but my lack of expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be walked up to the baby step by baby stepof expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be crossed self-study baby baby
- Recent changes to your computer
- What you have already tried to solve the problem
Google comes up with these:
http://www.ehow.com/how_5074747_network-PlayStation-computer.html
http://www.ehow.com/how_2216306_add-PlayStation-3-LAN.html
http://www.Google.com/search?q=network+a+PlayStation+and+a+home+computer&start=10&hl=en&SA=N&RLS=com.Microsoft: en - us & prmd = ivns & to source = univ & to TBS = vid:1 & to tbo = u & ei = PrtKTanFLMmCgAfjscnVDw & to oi = video_result_group & to ct = title & to resnum = 10 & ved = 0CGoQqwQwCTgK
http://www.absolute-PlayStation.com/PlayStation-Network/expert-PlayStation-3-hardware-accessory-help-PlayStation3-PS3-console/10631-PlayStation-3-wireless-connection-setup.html Brian Tillman [MVP-Outlook]
--------------------------------
https://MVP.support.Microsoft.com/profile/Brian.Tillman
If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer. -
Computer upgrade - Lightroom from Windows to Apple
Hello
I am wanting to upgrade my Dell computer while a desktop computer running Windows 7 (which is slow and I hate it) to the Macbook Pro laptop.
I was wondering if others have found this easy to do without losing catalog information and so changing from Windows to Apple is easy to do. I'm pretty computer illiterate, any tips or advice appreciated.
NAT
See How can I move Lightroom to a new computer? Lightroom Queen
You have a perpetual version or cloud?
If perpetual Lightroom serial number is valid for both Windows and Mac.
Download the installer from Adobe's Mac, install and enter your serial number.
If Cloud, see download and install apps Cloud Creative
-
The old hard disk does not run Windows, so access to the usual file through Windows Explorer or Firefox has not worked for me. The old hard drive is now a slave drive and all files are intact and accessible via the new Windows 7 64-bit operating system.
You have Windows configured to display the hidden files and folders? If not, do it as soon as the first. http://Windows.Microsoft.com/en-us/Windows/show-hidden-files#show-hidden-files=Windows-7
Then, what version of Windows do you have on the old drive? Your profile folder must be on the way there:
Windows XP and earlier versions:
\Documents and Settings\username\Application Data\Mozilla\Firefox\Profiles
Windows Vista and later:
\Users\username\AppData\Roaming\Mozilla\Firefox\Profiles
If you find multiple profile folders, see the recent order. You find a subfolder named bookmarkbackups. This article describes how to restore the .json files, you will find: restore bookmarks from a backup or move them to another computer.
A little luck?
-
Windows Media Player has stopped working, as well as the sharing of multimedia files
My husband told me that he has always had difficulty to play the DVD on WMP. I discovered that it would not play because there was a problem with the audio. I couldn't find the solution to this problem. However, we were able to play, burn and rip CDs until what we downloaded Windows SP2 for Vista Home Basic (32 bit), two days ago. Since then, we have not been able to open the app, and the WMP network sharing Service. I tried to run the Setup program, but it is said that there is a newer version of WMP and it will not replace or repair. I wanted to see if I could find a solution to this problem without having to resort to reinstalling Vista or restore to an earlier point. I also noticed that when the WMP application has been updated July 15 to the new version below, there were times this video Web sites would not play and we would have to restart the computer so that we can read them. More information on apps not working do not are below:
Windows Media Player has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: wmplayer.exe
Application version: 11.0.6002.18065
Application timestamp: 4a5dce03
Fault Module name: wmp.dll
Fault Module Version: 11.0.6002.18065
Timestamp of Module error: 4a5de837
Exception code: c0000005
Exception offset: 001ebbee
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Information additional 1: 0 b 09
More information 2: 6e4d7c25afc4250296f8b39df8954e57
3 more information: 0e19
Additional information 4: 79b07001e2b2170f3bf5c0bdcf41c61c
Windows Media Player Network Sharing Service has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: wmpnetwk.exe
Application version: 11.0.6001.7000
Application timestamp: 47919370
Fault Module name: wmp.dll
Fault Module Version: 11.0.6002.18065
Timestamp of Module error: 4a5de837
Exception code: c0000005
Exception offset: 00259b 38
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional information 1: 65ce
More information 2: f3639ff676d879619c14ca889d32cd4c
Information additional 3:9792
Additional information 4: 137aaa9fce82e760bb8dec1aeefbbef9
Thanks to all those who are able to provide information to resolve this problem.
~ Jessica DeGrandi
My husband told me that he has always had difficulty to play the DVD on WMP. I discovered that it would not play because there was a problem with the audio. I couldn't find the solution to this problem. However, we were able to play, burn and rip CDs until what we downloaded Windows SP2 for Vista Home Basic (32 bit), two days ago. Since then, we have not been able to open the app, and the WMP network sharing Service. I tried to run the Setup program, but it is said that there is a newer version of WMP and it will not replace or repair. I wanted to see if I could find a solution to this problem without having to resort to reinstalling Vista or restore to an earlier point. I also noticed that when the WMP application has been updated July 15 to the new version below, there were times this video Web sites would not play and we would have to restart the computer so that we can read them. More information on apps not working do not are below:
Windows Media Player has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: wmplayer.exe
Application version: 11.0.6002.18065
Application timestamp: 4a5dce03
Fault Module name: wmp.dll
Fault Module Version: 11.0.6002.18065
Timestamp of Module error: 4a5de837
Exception code: c0000005
Exception offset: 001ebbee
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Information additional 1: 0 b 09
More information 2: 6e4d7c25afc4250296f8b39df8954e57
3 more information: 0e19
Additional information 4: 79b07001e2b2170f3bf5c0bdcf41c61c
Windows Media Player Network Sharing Service has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: wmpnetwk.exe
Application version: 11.0.6001.7000
Application timestamp: 47919370
Fault Module name: wmp.dll
Fault Module Version: 11.0.6002.18065
Timestamp of Module error: 4a5de837
Exception code: c0000005
Exception offset: 00259b 38
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional information 1: 65ce
More information 2: f3639ff676d879619c14ca889d32cd4c
Information additional 3:9792
Additional information 4: 137aaa9fce82e760bb8dec1aeefbbef9
Thanks to all those who are able to provide information to resolve this problem.
~ Jessica DeGrandi
Jessica DeGrandi, test cela in another profile and let us know your result:
Create a new user profile:
Follow these steps to create a new account, we can test:
- Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
- Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- Click on create a new account.
- Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
- Log out and log in to the new account.
- Test the Windows Media Player.
(To remove the test profile follow the steps above and choose to remove the account from the user accounts).
-
My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver and freezes. I see a green circle turning. He never stops. I tried ctrl + alt + delete. It does not work. I did repair the system. No use. I tried the system restore. It shows a file as OS (C :) and another as recovery (x :). I chose the recovery (x :) as file control. He has worked and showed a message like system restore successfully in safe mode. But the normal mode of sill is freezing after the password screen.
Hello
- All changes made on your computer prior to this question?
- You have an antivirus installed on your computer?
To perform a clean boot on a computer that is running Windows Vista, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after starting the computer, reinstall and run the program and see if the problem is resolved.
Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
http://support.Microsoft.com/kb/331796
To restore your computer to a Normal startup mode, follow these steps.
1. click on start in the box start the search.
2. type msconfig and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
3. click on the general tab.
4. click on Normal Startup - load all device drivers and services and then click OK.
5. When you are prompted, click on restart to restart the computer.
Also try running a Virus scan using a live care online utility.
http://OneCare.live.com/site/en-us/default.htm
http://www.Microsoft.com/Security_Essentials/
Follow the steps mentioned in the link below
How to get rid of malware.
Let us know if this helps
Concerning
Anthony. -
Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.
Turn off the computer.
Wait 10 minutes.
Start the computer.
The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.
Launch the prompt with administrator privileges.
Press the Windows key + X
Click prompt (Admin)
Type the following command:
Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN
Press enter on your keyboard
Exit command prompt
Restart
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
How to access the old iomega 100 files on Windows 7?
I guess I need a current and relevant driver to allow my old drive 100 iomega to work when I plug it into my Windows 7 computer. But - Is it true? Are there? Will it work at all? What other issues should I know? I don't remember the OS, I got when I bought the drive unlike the year 1999-2001.
Site of Iomega said the next thing that is qualified for Windows 7 32 bit: ' Zip® disks: Zip® USB, ATAPI, FireWire or SCSI 100 MB, 250 MB or 750MO drives should work with native drivers in Windows 7. " Software done IomegaWare does NOT with Windows 7, so the IomegaWare functionality will be unavailable. »
I'm sorry my computer knowledge level is well below those of you on this site (but I am learning! is perhaps not listed here) but I have been unable to find clear assistance on the web... 'native' - so Windows 7 can simply accept the zip drive? This sounds very wrong - also Iomega may simply refer to the course Zip 100, 250, etc..
I have the 64-bit version of Windows 7 (HP Pavilion dv7): what about that qualified for both 32 and 64-bit, it has an entry for "floppy drives" with serial numbers starting with D0, that my "zip" drive does not begin with.
I want to do this by myself, but with any of your comments, it can be clear, that I need to take the reader to a computer repair store. I hesitate just give it a go with other information for fear that something is very wrong with my computer.
I appreciate your help on behalf of quite novice. Thank you.
Can I find a friend with an XP system and attach the drive to him. You may need to install the drivers (which you would get from Iomega site). You can uninstall them later. Reattach the drive, copy your files into the XP box, burn the files to CD/DVD-R. Buy your friend a beer. :-)
Note: If you get the same problem on XP with all disks, then the drive has probably failed. Then you have to find someone who still has a USB Iomega Zip drive. Some technicians will always have them. I have one on my shelf - have not used in years, but I keep it just in case a customer is your problem.
MS - MVP - Elephant Boy computers - don't panic!
-
Transfer from Windows to Mac. Need advice on the brand and model of HD Ext for compatibility which will not need reformatting? Advice welcome.
If you want a HD post to be read by windows and Mac OS. The best choice would be the format ExFAT.
-
Have a new laptop with Windows 7. Responsible for Office 2007. Cannot open the old Excel files. Get the error reading .xlsx is not a valid Win32 application when I try to open the file.
Right-click on the Xlsx file and select open with. Then find Excel and make sure that it is selected to always open with this program. Click OK, and then see if it works
-
Copy the old Time Machine files to the new disk TM
Sorry people, I have to ask two (related) questions:
(1) I have a WD My Passport for Mac drive connected to an Airport Extreme and 2 Macs use for backup via Time Machine. Now, the disk is full. I bought a WD My Book for Mac drive with a capacity of 4 TB and am ready to go.
Question: can I copy the old files of Time Machine on my new book?
(2) until now 2 different Macs used the My Passport as a Time Machine drive with no problems.
Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?
Thank you very much for your help!
Question: can I copy the old files of Time Machine on my new book?
Yes you can, but there is a lot of work, a little complicated, time consuming and not worth the effort for most users. The main reasons for this are...
(1) the older backups will take a good amount of space on the new drive, limiting the space on the disk again.
(2) Time Machine backups for the old files will continue... it will make a new copy of every Mac and then go forward again with incremental backups.
A better plan would be to keep the old drive on hand for a few months, in which case you need to go back and look for a file. After a few months, you will have a beautiful story from backup to the new hard drive and no need of older backups so you can remove the old disk and keep around as a spare part or use it for other purposes.
Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?
While you can partition the drive and save each Mac to a separate partition if you wish, there is really no need to do this since Time Machine will automatically create separate for each Mac backup files.
-
I have re-formatted a computer for my friend, boiught a genuine copy of windows xp pro, but when I have bin and enter the serial number on the last block of numbers it will not enter the letter "N", so I can't validate the copy I have... why?
I tested the keyboard and the letter "N" works perfectly
N is a character not allowed in the Windows product key - check the label again.
Where did you purchase this license?
Maybe you are looking for
-
My game is causing an error, how can I stop it?
The other day I installed my legacy of Kings game on my computer, but when I went to play it, it shut down my computer. I checked the disk it is not scratched. I did not make anything unusual. But the two times I tried to play, I was going to start v
-
Failed to start Windows Media Player without updating to a new version
original title: Windows Media Player does not work. When I try to start Windows Media Player, it says I have a newer version installed but I can not find anywhere on my computer. How update WMP for Vista Ultimate SP2?
-
Followed by using OBIEE 11 g seems to try to insert in a table not specified in NQSconfig
Hi allA former member of the staff to the United Nations, for it to work I had implemented monitoring using the tables S_NQ_DB_ACCT and S_NQ_ACCT of the use.Another Member of staff then decided he wanted to customize our monitoring of its use and cre
-
Impossible to install the latest version of Flash Player on Mac (OS 10.9.5)
Asked me to install the latest version of Flash Player on my Mac (OS 10.9.5). First of all, everything went as usual: I downloaded a disk image, called "AdobeFlashPlayer_22au_a_install.dmg", and when I click on that I get a "Adobe Flash Player Instal
-
Install Adobe does not recognize my password
There is a technical problem where adobe does not recognize my password, I installed and uninstalled several times, changed my password am very frustrated