Computer display of Windows 7 problem

Similar Questions

• My computer displays the windows logo, but fails before I can log on, it keeps looping to the admin. password. by pressing the F8 key disables the system.

  turn on computer

  request password to connect

  Enter the password

  Displays the windows logo

  loops back to enter the password to connect

  If I press F8 repitedly monitor goes blanck (upper left) SYSTEM DISABLED

  You can get as an administrator (you know, fake out)?  If so, you can check in Applications under all users of Docs & settings for a kind of beginning of the app that is a failure; worst case, you can at least create a new user from there...

• Display in Windows 8 problem

  Hello.

  I have a laptop Lenovo (Y510) recently and installed windows 8 pro on it. I have a problem in the display in most programs. Ribbon of Microsoft Office programs icons are large and are not transparent. In the lower part of some orders of Abaqus windows are off-screen (they exist, such as the buttons OK and cancel, but they cannot be seen on the screen) and Ribbon icons are larger than usual (I have another laptop with windows 7 and can see this ions correctly here). I spent the last few days looking to solve this problem, but it has still not resolved. The recommended resolution is 1366 x 768 and the laptop screen is HD.

  Please help me. It's a big problem.

  You can adjust the size of the elements on the screen by this method:

  (1) right click on the desktop, choose the resolution of the screen.

  2) click on "make text and other elements more or less."

  (3) choose your new size

  (4) restart the computer

• Display in Windows XP problems

  Original title: display windows win XP drivers

  have windows xp installed and have display problems

  Hello

  -Do you get any error messages?
  -What exactly is the problem with your screen?
  Suggestions for a question on the help forums

  You can follow the steps described in this article and check if this helps solve your problem.

  Resources for troubleshooting problems in Windows XP

• Display in Windows Mail problem

  Original title: Outlook.com

  Title changed to "Display in WLM problem."

  Although he can be independent, when I logged on this AM, I had IE 9 privacy statement. When I open Windows Mail, lack of it for the first time ever was, on the far left of the screen, the designations for what I watch one, that is, "Inbox", "writes," "Sent", etc. I have them want to come back and can not find directions to do so. I'm not sure that this question does not belong to Outlook.com, which I was surprised to see it as a category instead of Windows Mail. Outlook.com, I copied the following: "you can connect Windows Mail for Windows Vista to your e-mail account using POP3 or IMAP4 connectivity. I have POP3. Anyone know what's happened and how do I get my list of categories of messages to display on my screen again? Thank you.

  Kay,

  iFiredog is correct. I don't have Windows Live Mail. I have 'Windows Mail'. This is the Version 6.0.6000.16386 (vista_rtm.061101 - 2205). I can't find the tool captures to take a screenshot. While I was looking for it, I came across an icon at the far right of them above my Windows Mail. It is a rectangle (or square?) anything other than straight lines, showing one after the other on the icon. I clicked it. Bingo-test - files in my Windows Mail reappeared on the left side of my Panel. So, the problem seems to be resolved, unless when I go back to Windows Mail, list of folders is part once again! I have no idea how I lost it.  As to move my viewing of Windows Mail to the right with the arrow (on each side of the screen), I had tried more than once. The arrow on the left side of my screen was not working. He has nothing. The arrow on the right side did expand the display area to include plenty of empty space, that I have on the right. However, I leave here! Thank you for your help, even if she didn't direct me to a solution, because I fell on my own.  Libbiss

• Re-installing CS3 on computer upgraded to Windows 10 - problem with serial number

  I rebooted just CS3 after installing Windows 10 on my laptop. When I enter the serial number, I get a message that says that the number is not valid.

  Error: "serial number is not valid for this product". Adobe Creative Suite

• A new username displayed on my computer after a windows 8 update.

  A new username displayed on my computer after a windows 8 update. A name I do not know or do not recognize. After the update, the screen showed 2 users, the name of 'John' and myself. It was not there yesterday, and I'm the only user. I also bought the new laptop so it may not be a previous user. Can someone tell me how to remove 'John' from my computer. I'll do a system restore & see if it works. In the meantime, if anyone has had this happen, do you?

  Spoiler (Highlight to read)

   

   

  Yes, thanks a lot! I had no idea what to do. My husband googgled problem & apparently, what happens with a windows update currnent. I appreciate your help. There are still a lot of window 8 I don't know yet. I am a person mentally XP.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• Problem with upgrade of the computer and activate Windows, he stated that "the failure of key you entered is already in use.

  Original title: problem with upgrading the computer and Windows activation

  I have improved my week to loast of computer of an Intel Core 2 Duo to an Intel Core 2 Quad processor.  Now Windows tells me I need to register my product.  When I tried to do, he said that "the failure of key you entered is already in use.  To activate Windows, you will need another product key Windows Vista Home Premium. "How can I get MIcrosoft to realize that I have not installed Windows on multiple computers. I just put my equipment?

  Hi Tkelleyaustin,

  I suggest to check the following items and check if the problem still persists.

   

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

   

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/activate-Windows-on-this-computer

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  I hope this helps.

• do I have to put the new windows on my computer whenever I have a problem

  Dear Sir/Madam
  what I have to put new windows on my computer whenever I have a problem with it can let me know thanks to Chad Ryan

  No, you don't.

  Good luck.

• I get a foreign call telling me that I need to go to my computer because I have a problem with my windows operating system. I don't have confidence call ths.

  I get a foreign call telling me that I need to go to my computer because I have a problem with my windows operating system. They want me to go to eventvwr. I told them no and I do not trust to this call.

  Now, I'm worried, why they call me.  They call 4 = 5 times a day.

  Help! I'm not good with IT

  It is a scam.  Tell them that put you your list of calls only.  If you have a way to block their number, too.  If they don't stop, report them to the Better Business Bureau.

  Good luck.

• I downloaded Adobe photoshop cs 5, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  I downloaded Adobe photoshop cs 5, for trial, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  just uninstall cs5, clean a cleaning use of the CC tool to resolve installation problems. CC, CS3 - CS6 then install.

  Make sure your file is downloaded to your hard drive sizes are expected file sizes.  If you don't know how, ask someone to do it for you.

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• Will not be displayed in Windows Explorer (16 GB SanDisk 45Mo/sec Class 10)

  Hey!

  I have two exactly the same 16 GB SanDisk 45Mo/sec Class 10 for over 2 years now, I've been using them with my Nikon D5100. One of the two SD cards will not be displayed in Windows Explorer for a few weeks. I am running Windows 8.1 64-bit and I use the SD card reader built into my ASUS N550JK

  More funny thing is, the other SD card is always as they both were normally. Defective SD card still works and I can still access my photos via another PC. Also, connecting the Nikon to my PC with the SD card inside my camera allows me to access the images.

  Does anyone know how to fix this? I want it to appear in my Windows Explorer as it did a few weeks ago.

  Thanks in advance.

  ~ Uni

  Thank you for your answer!

  Strangely, the problem is solved itself... I don't know what I changed to my computer. Maybe install the Windows updates? I do not know.