Computer does not recognize the CD - RM when connect camera on Windows 7 Home Premium

I have windows 7 Home Premium and just today my computer does not recognize my CD so I can add my camera to my computer. I worked on it for about 6 hours. looking everywhere and tried most everything, but it still doesn't work? Can you help me? Thank you..

Try to use a DVD cleaning disc to clean the disc.  If this fails so that the reader has probably not and must be replaced.

Tags: Windows

Similar Questions

  • Computer does not recognize the Olympus Stylus 820 digital camera and shows no photos

    In December 2010, I had a virus that Microsoft was able to destroy, case #866RJP and now my computer does not recognize my digital camera.  Is there a link between the virus and do not recognize a camera?  Why my computer does not recognize my camera?

    GO to the ms Update site and run custom updates, can help.

  • Computer does not recognize the CD/DVD drive

    For these last days, my computer does not recognize the CD/DVD drive.  I have tried everything - publishers of registry, check the physical connections inside the computer, the system restore and install Fix - It programs.  However, the computer does not recognize this drive.  I also wonder if it is a hardware problem.  The light on the drive is a constant in green, and does not have the Open button.  And when I use the bent-paper-clip-in-the-little-hole and can open the drive, it will not read the disc.  Please advise...

    I fixed my problem with the BIOS operating system & not recognizing not not my DVD player to reinvest the solder on the motherboard.  You can find instructions on how to do it here: http://www.computerrepairtips.net/how-to-reflow-a-laptop-motherboard/

    There was a little crazy with my video drivers when I started first, but everything works after resetting the BIOS by default.

  • Computer does not recognize the monitor after update of Win7.

    Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

    It is a laptop?

    And if you start in safe mode?

    Desktop

    Haven't tried safe mode
    Disconnected the projector, and then restarted; back to work now!
  • I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

  • my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

    The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

    Ron

    The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

    Ron

    Microsoft did not your hardware - done HP.

    All support for it - regardless of your operating system - is the manufacturer of the equipment.
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us

  • Why my computer does not recognize the CD when inserted?

    I am trying to install a software on CD, but the computer does not recognize it.  I tried even my audio CD but they is also not recognize it.

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • Computer does not recognize the disc in the cd drive.

    original title: media player 11 does not recognize the disc in the cd drive.

    Media Player 11

    I use Windows XP oper. system, my windows player works fine execpt when I place a cd in the drawer of rip to rip to my library WMP does not recognize that there is a disc in the drawer of thr. The problem started after I installed a vinal record of pc system, but he has always recognized that the disc was in rip drawer, if I put the disc in the drawer and WMP has closed and reopened. then it started to not recognize that a disk was in the drawer, even if I closed and reopened WMP with the disc in the drawer. Any solution to this problem would be greatly appericated. Thanks George

    Hello

    Remove the filter upper and lower filter and see if it helps.

    r: clickStartand then click run

    b:   In theOpen box, type regedit, and then click OK

    c:   In the navigation pane, find and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    d: in the right pane, clickUpperFilters.

    Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. ClickUpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step g.

    e: in theEdit menu, click delete.

    f: when you are prompted to confirm the removal, clickYes

    g:    In the right pane, clickLowerFilters.

    Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section"next steps"to learn how you can find more solutions or more help on the Microsoft Web site.

    h: in theEdit menu, click delete.

    i: when you are prompted to confirm the removal, clickYes

    j:    Exit Registry Editor.

    KC: restart the computer.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    Hope this information helps.

  • Computer does not recognize the c200 player

    When I plug my c200 player in your PC with Windows Media Player running, the computer does not recognize it.  I check my computer and the drive does not appear there either.

    I took the c200 at Best Buy and they tried two different cables and their computer could not identify the player either.

  • Computer does not recognize the CD Driver.

    My computer does not recognize my CD driver or does not burn anything.  Just used this mother's day so I know it worked.  In the Device Manager under DVD/CD rom players, there is the DVD A DS8A2 currently ATA Device.  It has a yellow triangle with a! inside. When I click on properties of this, he says that the device cannot start. Code 10.  Tried to find solutions, but it does not allow me to do.  This same thing has happened, but I do not remember how to fix.  Help.

    Try to take the cd player and plug in or go to the website of computer company and try to find drivers ex: dell, lenovo, sony, emichine ect.

    It has helped me.

  • Cannot map 323 D-link; my computer does not recognize the Volume_1 of D-Link

    I'm not able to map my D-Link 323; my computer recognizes the D-Link, but does not recognize the Volume_1 of D-Link.  I would be grateful if someone has an idea how to solve the problem.

    Sincere thanks, Bob

    Hello

    1. which version of the operating system are you using?

    2. do you receive any error messages?

    See the following site:

    http://Windows.Microsoft.com/en-us/Windows7/create-a-shortcut-to-map-a-network-drive

    For more assistance, contact the manufacturer.

  • After installing service pack 2, computer does not recognize the cd drive

    Original title: after installation of service pack 2, computer does not recognize my cd drive, I deleted the computer recognizes the drive but the programs are not yet loads

    My burning software are not yet picking up the car, it says no recorder found or is just let me burn, I had none of these problems before I started to install the updates

    Hi Shon S,.

    Since you are facing problems after you remove the filters, you can try to uninstall and reinstall the DVD player and check.

    For more information, you can refer to the following article:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Hope this information is useful.

  • Computer does not recognize the printer driver Canon ipf 8100

    I downloaded the driver fron Canon and installed on my 64 bit Windows 7 system, but the computer does not see the driver for my printer is still not installed

    Hi Larry,

    To better understand the issue, I would like to know if you receive any error messages. If Yes, what is the error message that is accurate and complete.

    It seems that the printer is compatible with windows 7.

    http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=canon%2BIPF8100&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

    Method 1:
    Run the troubleshooter and check if that helps.

    Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/en-us

    Method 2:
    If the problem persists, try the procedure described in the article and check if it helps.

    Note: Try all the steps except the resolution of problems.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • I have an old version of Illustrator (9) and I can't install it on my computer.  The computer does not recognize the drive.  Is there a way to get around this?

    I'm trying to install Illustrator 9 on my PC and the computer will not recognize the disc.  Is there a solution to this?

    You could look to see if there is a download link in the links of kglad in answer 1 # here https://forums.adobe.com/thread/1930162

Maybe you are looking for