Computer doesn't recognize wireless network

Original title: NV76R Gateway series win8 wifi

Peripheral gateway Panel fast lane said wifi is on the computer is not agree it is said off the coast. Was w / the enternet over service provider technical support 5 hours. Right now I am connected w / a 2 ft.  Ethernet cable., someone knows how to do comp recognize wi fi is on... computer recognize not all networks. Before I could activate / deactivate airplane mode and it alternated w / WiFi being on the right side of the computer screen

I know you it is resolved, but for those who do not, it is this that has worked for me, gateway nv76r series, model VG70, Windows 8...

1. reboot, and then restarting, keep hitting f2

2. will take you to a configuration screen

2. in the configuration screen, Press f9, and then enter

3. then press f10 and enter.

Then I got wireless.  I hope this helps...

Tags: Windows

Similar Questions

  • My computer can't find wireless networks.

    My computer can't find wireless networks. When I search for them I can answer "wireless networks service is neither the race" (the Swedish free translation).

    I have Windows Vista and I'll try to find my new wireless network working om my laptop and my iPad.

    Hello

    (1) did you check the State of the wireless autoconfiguration WLAN service in the services window?
    2. do you have any security software installed on the computer?
    3. have you made changes on the computer recently?

    Method 1:

    We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
    1. Click Start, type services.msc and press to enter.
    2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
    3. on the general tab, change the startup type to automatic and click on the Start button.
    4. click on apply, then ok.
     
    Try to connect to the wireless connection and check the result.

    Method 2:
    If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run System File Checker analysis, try the steps mentioned in this link: http://support.microsoft.com/kb/929833

    Method 3:

    I also suggest you to see link and check.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx

  • my computer doesn't recognize my usb device and mouse

    MY COMPUTER DOESN'T RECOGNIZE THE DEVICE USB AND MOUSE IT NOT THERE NO COMMUNICATION BETWEEN THE COMPUTER AND THE MOUSE ALSO COMPUTER AND PORTABLE USB

    Thank you

    You must indicate what is the brand of mouse and the model? Whjat transponder type does the mouse have? The mouse has ever worked? Your laptop has 4 USB ports. No device works in one of the ports?

    The USB FLASH DRIVE is recognized if plug you it into a USB port on a different computer com?

  • Satellite L500-13z - Windows 7 does not recognize wireless network adapter

    Hello

    The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:

    After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).

    =>, Is there a way to know what is my Wifi adapter?

    that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).

    -Online someone knows when will be released Windows 7 drivers on the website?

    Hello

    Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
    Need you an information like PCI\VEN_XXXX & DEV_XXXX

    If you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
    http://www.PCIDatabase.com/

    After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
    Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.

    Welcome them

  • Computer can not find wireless networks

    Hello

    Whenever I restart my computer I have to open the part of the CPU and re services - enable Automatic Configuration Wireless for my computer to recognize networks wireless in the region. After that I then have to go to the Advanced Options in the wireless network connection properties, and then click the "use Windows to configure my wireless network. Then at that time, I can connect to my wireless router. I know that this is not normal on XP, because I've used it before, but before that I took off my computer Vista and installed XP, I had none of these problems.
    Thanks in advance

    Have you installed the correct WIndows XP driver for your device without wire against the manufacturer (and their software that can replace software config wireless XP.)

  • Computer doesn't recognize internet connection

    My HP dv6000 family Window Vista premium Service pack 2 64-bit does not recognize my internet connection (local area connection or wireless network connection). The network icon has a red x and it says not connected, but actually I am connected to my wireless network. Also on the network and sharing Center I can't see any connection (no map) but don't forget, there is a connection with my wireless (a Netgear router on my desktop computer); If I open my wireless connection, he said that the network type is an Access Point. How can I change this? How can I make my connection wireless private when the connection does not appear on the network and sharing Center? I deleted my wireless network and set up again and always say the same thing.

    I am able to use the internet, but I can't update any program using the updated window or another service on my laptop. I already did a restore of the system, but all that the same stills. Can anyone help me please with this situation? I have tried everything I know, but nothing seems to work.  Thank you.

    Hello

    I saw the Red X problem before but not with any other questions you have.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ===============================

    After the foregoing:

    Do a 1 Restore Point then you can go back to where you were if necessary.

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    ------------------------------------------------------

    Then:

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
    Note the version - click on update driver (can't do anything as MS is far behind certifying)
    drivers). Do the same for network (NIC) cards - then right click on the devices and UNINSTALL.
    Reboot - it will refresh the driver stacks.

    Now go look at the site of the manufacturer of the system for the updated drivers.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    Repeat for network (NIC) card and is a good time to get the other updated drivers as
    Loves Vista updated drivers.

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
    be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
    and then go look for new ones manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -----------------------------

    Allow you to reset your TCP/IP stack just to make sure:

    Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

    Enter these one at a time (or copy and paste) and press ENTER after each

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int Reinitialis

    netsh int ip reset

    netsh winsock reset

    Reset

    ----------------------------------

    Make sure you know the details of connection to your router wireless and wired - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - define the network locations
    page - down left click on merge or delete network locations - REMOVE all instances of your network
    (and all the others you no longer use)-RESTART.

    ---------------------------------

    Other tips:

    If you are using a wired cable-

    Panel - Manager of devices - adapter - (NIC) - double click on the Advanced tab and set
    'speed & Duplex' at 10 Mbps full duplex and try 1/2 duplex. Be sure to APPLY / OK. Maybe
    help here: (don't forget the answer is complex, because there are probably more than a single)
    thing at the origin of the problem)

    ---------------------------------

    Others.

    http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

    http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

    http://www.annoyances.org/exec/Forum/WinXP/1109372091

    There are many causes, one of which is the small monitor pays attention to the wrong network
    device. You can try to disable any other network such as the WiFi device and restart it to see if it
    has an effect.

    Still a hardware such as a network card problem loose which is not properly attached to the computer
    can cause this.

    http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

    Hope these helps.

    Rob Brown - MS MVP: Bike - Mark Twain said it right.

  • I want to add another computer to my existing wireless network

    Ask the installer for my "SSID".  It's been so long that I first set up my network that I don't remember what I used.  How can I find out what my "SSID"?

    The "SSID" is the name of your wireless network. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Computer doesn't recognize not update Service Pack 1

    Original title: you read these questions? the responses I've read so far say NO

    The question I ask has been requested several times, but the responses I've seen do not address the issue, just to give instructions on how to install SP1, but not how to fix the problem by heart.  SP1 has been installed on several occasions:

    10 times with success since 14/07/2015 through today 06 19, 2015, [update history] and the computer does not recognize always day and it says I need.  It's why I can't do SP2 either.  The computer properties does not mention MS

    Last year, I called and the technology did and the same results.  Please answer this question!   Thank you

    The question I ask has been requested several times, but the answers I've seen do not address the issue, just to give instructions by heart on how to install SP1, but not how to fix the problem.  SP1 has been installed on several occasions:

    10 times with success since 14/07/2015 through today 06 19, 2015, [update history] and the computer does not recognize always day and it says I need.  It's why I can't do SP2 either.  The computer properties does not mention MS

    Last year, I called and the technology did and the same results.  Please answer this question!   Thank you

    Hello

    We read the questions and try to give solutions to the best of our ability, depending on the quality of the information you provide on the problem.

    We do not work for Microsoft.

    We are mainly volunteers here, just like you, computer users who give free advice from other users in our own spare time.

    @@@@@@@@@@@@@@@@@@@@@@@@@@

    Unless you have the SP1 and SP2 installed, there is no support for Vista; Microsoft support ended.

    You say that you do not have SP1 installed, then of course we give you instructions on how to install it.

    And when you post here complain about anything doesn't work for you, publish a list of the things you have already tried.

    It is not installed if it does not appear under properties

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed (apparently without SP).

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    See you soon.

  • my computer disabled each startup wireless network.

    I'm using the laptop computer window 7. wireless network is turned off the coast on a few minutes later. It happens every time I turn on the computer. so, I have to press fn + f1 to go to the wireless network and press. its takes a long time when I start the computer. I want to keep the network wireless.

    Hi Christine,

    Welcome to the Microsoft community.

    I would like you to follow the suggestions by Mohammed Raieed replied on 6 July 2011 at the following link:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/my-laptop-keeps-turning-off-its-wireless/6e5d97be-ea6e-4a21-8149-fafe2756d584

    Hope this information is useful. Back to us for any information with Windows.

  • Windows 8 portable computer connects to the wireless network

    Details of the first computer:

    New laptop: Samsung series 3 - NP355V5C-A03CA
    Wireless network adapter: Qualcomm Atheros AR9485WB-EG
    I got this laptop this morning and have been unable to get it to connect to my network wireless at home.
    I receive the notice to "Check network requirements", and then the notice it can not connect to the internet.
    He never asks the password. I added manually the wireless network and which makes no difference.
    I followed the suggestion of /every/ in solving problems, even those who do not seem to apply, just in case.
    I tried to install the older drivers for the Ondaaah, I installed not official. I ran Windows Update twice, installed it, still nothing.
    I'm pretty computer, but it becomes for me. I googled to the ends of the internet, I have tried different things for four hours, and it does not work.
    I tried at my aunt's House and it worked, but it does not work here.
    I rebooted my router several times and been updated, nothing. At home I have a network WEP, 802.11 g
    What else could be missing? Everything connects to home without any problems, just this new laptop has a problem.

    Hello

    Thanks for posting your query in Microsoft Community.

    It appears from your description, that you are unable to connect to the network using Samsung series 3 - NP355V5C-A03CA portable wireless.

    I'll be happy to help you.

    I would be grateful if you could answer the following questions:

    1. did you of recent changes made to your computer?

    2. which antivirus app do you use?

    3 have you tried to connect to a wired connection?

    I suggest to follow the steps below and we update on the State of the question.

    Wireless and wired network problems:

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Why can't I connect to the Internet? :

    http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • Guest account not recognize wireless networks

    I try to get the guest on my Surface RT account to connect to a wireless network. So far, other accounts, such as my personal account, work very well and I can browse the internet, but when I switch to the built-in Windows 8.1 guest account, it shows that there is no network connectivity at all. In the bar of charms, I select settings and the network not available poster icon. If I select this icon to display the wireless networks, it shows that I am connected to my wireless network and it says "connected". I've disabled the Wi - Fi through this menu and reconnected, but when I use other apps, they tell me that I am not connected to the internet. Any thoughts?

    Since Windows XP, guest accounts have not been allowed to initiate an Internet connection. This is a security measure, and I don't think that this is changed in Windows 8.

    However, if an Internet connection is already present, the guest account can use.

    So, if you want to give access to the Internet Guest account, follow these steps:

    1. To connect to the Internet using a classic account.
    2. Without disconnection, let the guest account login.

    Given that the Internet connection is already in place, the guest account will be able to use it.

  • Why Satellite L300-10 q does not recognize wireless network

    This new laptop works well on a wired LAN but does not recognize a wireless local area network. Received the message no network found. In the same room with another PC laptop Toshiba the wireless LAN is located and has good signal strength.
    The wireless LAN switch is on and the 'antenna' pictogram led burns red.

    Seems that it is not configured for detection. No idea how to solve this problem?

    Hello

    You´re sure you checked all THE settings? I mean, if the local wired network works and the wireless is enabled, you need to check all the parameters available that could be done. One idea would be to check the L300 on another access point to make sure that the problem persists on different brands of wireless routers.

    Please check this first and make sure that your settings are all on "automatic" so if you do not find the reason, come back and we will try to find another solution.

    Welcome them

  • HP G72: connect my computer hp laptop for wireless network printer (4620 series all-in-one hp)

    I tried several times to connect to my printer wireless in the House and I always feel bogged down in technical language that is foreign to me. Questions asked, like URL, addresses and others and I don't have any idea where to find this info.

    I intend to try and install this printer one more time so mget the specific questions I need answers to, so bear with me please. Will be later.

    delnann

    While we're waiting to hear from you @7delnann7; Although I'm not sure of the question, you are experiencing or questions you have, I suggest running printing HP and Scan Doctor because this may require a very easy to use and useful.  HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

    • Connectivity:

      USB: Check that the USB connection from your computer to the HP product works properly.

      Network: Verifies that the network connection between your computer and your network is working properly.

    • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

    • Driver: checks the driver missing or corrupt files.

    • Device Manager: check the problems in Device Manager that could prevent printing.

    • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

    • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

    • Port Match: check the port settings for the HP product.

    • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

    • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

    • Print settings: check and adjust the print quality settings.

    • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

    • Scan tests: check the scanning mechanism, drivers, and registry entries.

    Source: try the HP Print and Scan Doctor for Windows

    Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

    If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find the key and the box are in the green circle.

    • If you see only the Green checkmarks (), the tool did not find any problem.

    • If you see green sides (), the utility identified a problem and fix it automatically.

    • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

    • If you see a red X (), follow the onscreen instructions to fix the problem.

    Thanks, I look forward to hearing back on your part. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

  • Pavilion m6 doesn't recognize wireless router

    Hello

    I have a HP Pavilion m6 running Windows 7 Home Premium.

    My place of work installed a router a few months ago.  It's a Cisco E2000.  My laptop will not recognize the signal wireless to the router.  He acknowledges about 10 other signals wireless from other locations outside the office.  My phone also recognizes the router and can connect to it, no problem.  I have installed all updates for Windows 7 and the HP laptop.  I also installed the latest driver for the laptop wifi card.

    Any suggestions on why the laptop does not recognize the wifi?

    Thank you.

    Finish by calling the support of Linksys.

    Apparently, my laptop wireless card does not recognize the 5 GHz Wireless band.

    You had to pass the Router 2.4 GHz.

    Works perfectly now!

    Thank you!

  • Computer doesn't recognize burner double layer Asus.

    Original title: Installation disks.

    I installed a burner double layer of Asus which worked fine and was given the drive letter g. My second drive was defective, so I bought a different burner Asus from the same company. I asked the seller if there is a conflict because the two discs were the same. He said no, because the computer would assign a different drive letter to the new drive. When I turned on the computer after the installation it recognized the new hardware and it gave the letter s. When I went to burn data, I noticed that the g drive was gone and the software did not recognize this drive. I restarted the computer and found that the two drives disappeared and I can't access either. Can anyone help please.

    These DVD players would be IDE?  IDE disks need to have the jumpers set to Master or Slave, when connecting TWO drives on the same IDE cable these discs were both probably "sold" with the cavaliers IDE setting 'default' value and they are both the same.  IDE see then the player and the possbily ignore the other «first»

Maybe you are looking for

  • 4.1 Core 2 Duo 13 "white MacBook (late 2008)

    I have an old MacBook running Mac OS X version 10.5.8 and want to switch to Lion, is it possible? I don't want to buy it only to find out that once I have it, it is not possible to upgrade to it. My laptop is MacBook 4.1 Core 2 Duo 13 "white (Late 20

  • local variables of power question

    Hello Attached, please fine 2 similar vi. WhileStoop.vi, I can start or stop the program at any x + y values.  But, in eventStoop.vi, I can not use stop when the program is running (program will end when x + y = 10).  Why the variable local power not

  • Slow W7 start after the installation of nVidia GTX470 (no drivers)

    I had a problem where, after I installed an Asus ENGTX470 recently bought without drivers installed, the computer has more than 10 minutes to start. When the trunk starts first of all, I can hear the HD to access information, but about 30 seconds to

  • My computer turns off by itself.

    I took the back cover off the computer and blew all the dust around the fans, without success. Someone knows why this happens? The Tower just completely stops without warning. It would work very well for hours then stop down as if someone pulled the

  • where can I find LR 6.3?

    I just improved between 4.4 and installed 6.0, but now my catalog has problems.I read about the problems to 6.2, and I don't want...I have I can't, I think I need to returned to 4.4, but it's a shame...I bought officially from Adobe, autonomousThank