Computer doesn't turn off not from the Start button on the desktop?

Similar Questions

• Computer doesn't turn off not except by a forced shutdown

  My computer shuts down only about half the time, or maybe less, and then I have to force a stop to the bottom by pressing the Start button on the computer.  I use IE 11 and Windows 7 and this problem started a month ago but I don't remember not something unusual is going on when it started.  Sometimes I let it just keep running and showing that he stops, and when I come back later to check it out, sometimes it is an icon in the task bar stating "Windows".  I can click on and close the icon & then it stops.  But it happened only about three times.  Usually he just keep running and showing it to stop until I have to force a stop down.

  Sometimes, when it starts all first, it flashes a message that a window is not closed and I have to click 'Cancel' and close the window.  But it's frozen so does not help by clicking Cancel.  I was always very careful to close all windows and usually turn off the computer at night.

  Of course, I'd appreciate any help with this problem.  wannierob

  Hello Wannierob,

  Thanks for the quick response.

  This scenario usually indicates a problem with the hardware. Alternatively, the driver can cause this problem. To identify the problem, check the following:

  
  1 overclocking: turn off overclocking to see if the problem occurs when the system is running at the correct speed.

  2. check the memory: check the memory using a memory controller. Check each memory chip is the same speed and that it is configured correctly in the system.

  3. power supply: make sure the power supply is enough power to properly manage installed devices. If you have added memory, installed a newer processor, installed additional disks or added to external devices, such devices may require more energy that the current power supply can provide constantly.

  4 overheating: check if the system is overheated by examining the internal temperature of the equipment.

  5. default values: use the default values of the system, and run the system.

  If you see that the computer generates a Stop error message that contains a BugcheckCode value that is not declared in an event ID 41, change the behavior of the computer restarts. To do this, follow these steps:

  1. right click on my computerand then click Properties.

  2. click on Advanced system settings.

  3. click on the Advanced tab.

  4. in the Startup and recovery section, click settings.

  5. Click to uncheck automatically restart .

  For more information, please refer to this.

  http://support.Microsoft.com/kb/2028504#method3

  Hope the helps of information provided. We know if the given steps helped.

• my computer doesn't turn off the first time.

  my computer doesn't turn off the first time I try to turn it off. This will turn off the second time I select "turn the computer off.

  Hi Guillermo_932,
   
  -You receive an error message or error code while trying to turn off your computer for the first time?
  -Have you been able to shut down your computer without any problem before?
  -If so, remember you have changed your computer before this problem started to happen?
   
  Follow the steps in the article, and check if it helps in fixing the issue:
  Computer does not close properly if selective suspension is enabled
  If it does not, check the event viewer to see if there is no error message related to this issue.
   

  See the following articles for more information on the event viewer display:

  Using the event viewer

  Procedure to view and manage event logs in Event Viewer in Windows XP

  After return with details that are of event viewer to help us help you better.

• my computer turns off not and the hibernation...

  my computer turns off not and the hibernation...

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  The above is kind of prerequisites and may solve the problem.

  ==========================================

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem
  and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the WiFi network card power management,
  Modem and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The windows of the bar of Windows are already a form of tabs, so I need them in Firefox. How can I turn off completely from the 23 of Firefox?

  RE: TABS ARE WINDOWS!
  The windows bar already functions as a tab bar. These tabs are called "windows". So, I find windows superfluous Firefox tab. How can I turn off completely from the 23 of Firefox? I don't need to what are essentially the bars of TWO Windows covering the entire width of the image of my screen! I already have a Windows bar at the bottom of my screen, and if I really wanted to, I could change ITS position towards the top of the screen, so that it would LOOK at the windows of Firefox tabs bar. Firefox TABS are, essentially, a SECOND bar Windows superfluous.

  Here are my reasons why I prefer to use Mozilla's Firefox, Microsoft Internet Explorer or Google Chrome. I love and admire Firefox intended to Mozilla on good security for Personas Firefox Add-on and for free use of Firefox in the Add on Ad-Block, which, as you know, has the merit of separate to reduce the size of the screen - the last is my reason for wanting to get rid of "windows" Firefox SUPERFLUOUS tabs bar. I'm terribly sick companies forcing bars (most representative of marketing campaigns, trying to sell me something) in my browser (and in my throat) whenever I download something. (In case you haven't guessed, I have deliberately talking about your bar of Firefox tabs as a '' windows' tabs Firefox bar', because the TABS are WINDOWS!)

  You can also have an addon to open new tabs in a new window.

  • https://addons.Mozilla.org/en-us/Firefox/addon/tab-to-window/?src=search

• Performance issuses, impossible to uninstall a program, add another user account, the computer doesn't turn off etc.

  Can anyone help, my vista home 32-bit edition computer is seriously messsed! ??

  I'm unable to download windows updates and I have like 20 of them to download, it just never performs an act he says its download, but it's not I can leave it for hours and nothing happens, this causes problems because my computer does now, because when you do it just says : configuration of updates and can last for hours, so I have to unplug the power to turn it off, which is not good for the computer.

  IM also having problems with other things such as it won't let me uninstall not more programs, I can't do a restore of the system from the control panel or add another user account. freezes Internet too much, slow start. I always get microsft popups saying: "the program has stopped working and not could find solutions to this problem" but I did a system restore in safe mode, but the dates were 3 months back and that didn't help the performance of this computer. I want to return to a closer date now, but I can't. as it doesn't let me do a restore of the system in the menu start control pannel ir.

  I run a scan with malaware had 181 made thereats that were deleted but I still have the same problems as above

  He said also my windows defender is not protected (outdated) more and needs to update, but it will not update

  Help, please

  Hi gandt85,

  1. you remember to make changes to the computer before this problem?

  2. are you able to boot into safe mode without any problem?

  Since you are not able to restore the system to normal mode, I suggest you to do a system restore to a recent date of WinRE using the full version of Windows Vista disk.

  Method 1:

  Do follow link below:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  You can also try to run a scan using Microsoft Security Essentials.

  Check out the link:

  http://www.Microsoft.com/security/products/MSE.aspx

  Also, try the malicious software removal tool and check.

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• monitor turns off not by the switch at the top. power cord seems loose at the back of the monitor. just need a

  I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?

  Thank you.

  Hello

  Try to push the power cord firmly upward.  It should not move when it is completely inserted.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• Cannot turn off bluetooth from the option of the family disappeared in the context menu of Tablet

  Hello

  Well, I installed Win 7 on my X61t, as well as new software from Lenovo, and I can't understand how to disable bluetooth now. I used to do that via the context Menu in tablet, I had radios settings there and I could turn off/turn on the WiFi and Bluetooth separately there. Now, I have only one option of radio wireless disable, which basically does the same thing as the wireless switch, so it's a bit useless.

  I guess that option could have dissaperaed because I have not installed logins now (and I can't install it because I'm fine with what I get with 7).

  So, how can I disable BT now? I tried through the taskbar icon, I tried via the Control Panel, through network connections, even through the Device Manager. Even when I disable all BT devices and connections Bluetooth LED remains on, so it is not totally disabled at the hardware level. Of course, so I want to be able to turn off quickly, as I did through the context menu of the Tablet, via the control panel is not really a solution anyway.

  Oh, and I don't know if it's important, but the Bluetooth light is on all the time during the boot now, and I don't think that it was before. Although maybe I just never used on startup with bluetooth turned on, so I didn't notice... here, not sure.

  Any ideas?

  Thanks, has soon!

  Dear Stansfield

  Hope a low-tech suggestion works for you.
  Have had a similar experience with the portability of devices two radio WLAN and Bluetooth individually vs black & white radio power.

  Found I needed to load the last shortcut key driver in your case for a X 61 Tablet 7764 CTO,
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-68009

  Then use the combination Fn and F5 (in blue) instead of other options in some menus of the Windows user interface.
  And voila, I found that the behavior has been defined in the "Fn + F5 parameters" button at the bottom of the pop-up window, the second box option
  "Alternate between turn off all wireless radios and by turning on all radios.
  instead of the first choice that I wanted
  'Display a menu that allows me to control the parameters of power to radio wireless in my system individually.

  Had the behavior corrected, and now he's doing what I want to happen.
  It will be useful for you, too.

  concerning
  Mika

• CC License doesn't work is not on the desktop.  Works on laptop.  Should allow 2 systems!

  I'm not their execution at the same time.  It installed and worked on the small laptop, but I need to work from the largest multi-screen desktop.  I installed it there are 2 years on the desktop, but all the software says still 'TRIAL' or 'Buy now'.  I have a subscription valid and up to date.  A representative told me that they would follow with me, but who is not moved.

  I have tired logout and back in.  For a moment it displays correctly then switches within 10 seconds approximately.  All updates are installed.

  Help, please!  It is my ability to do critical work.  The laptop is off to my left, and it is difficult to turn, and to lean on and squinch my eyes to work on it.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Computer doesn't turn does not on

  Hello everyone, my name is Demetri and I can't turn on my computer. It's a HP G61 laptop computer 632NR PC running Windows 7 32 bit. I left my laptop at home, disconnected, and when I came home and plugged in to charge, I left it all night. I came back and when I pressed the power button, the power on the front of the computer light cell phone flashed 3 times, and the thing does not illuminate. The laptop does not power without battery. The power brick is fine, because the power led on the side of the laptop is turned on, indicating that energy flows into the laptop. I normally use this computer for editing and need a fix as soon as POSSIBLE. Please help a soon, thank you.

  Demetri Poulos

  Here are some troubleshooting tips.

  Computer does not start. (HP G61 632NR.)

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01443371&cc=us&DLC=en&lang=en&LC=en&product=4125799

• (Redirected) Computer doesn't turn does not on

  I have an Aurora R2 and when I turn on the power it does if I unplug the power supply lead for 30 minutes. I have here a nattering when I try to turn on and then nothing usually happens after that.

  What is a power supply issue? Where can I go to replace? If this is the case.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do?

  I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do? Is there a place I can call for assistance?

  Contact customer service and ask them to help you.

  Scroll down to still need help?  Click on Contact us.

  Learn how to enable or disable Adobe applications

  Nancy O.

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• My computer turns off to configure the updates while I was working on a document - is that it lost forever?

  Original title: lost documents

  My computer turns off to configure the updates while I was working on a document.  I didn't save it.  Can I get it back? or it is lost forever?

  If it has not been registered, he went. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

  I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

  Take it to your local Apple store. They will find it for you.