computer fails to install the hardware device connected to USB

Similar Questions

• my computer failed, I installed the HDD in an older computer that I own

  my computer failed, I installed the HDD in an older computer that I own, and now it asks me to reregistar windows but never gives me the opportunity to enter the product key that also always shows up in windows

  Hello

  It depends on the type of license you have, as to whether you can transfer it or not.

  Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

  OEM licenses are not transferable.

  If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.

  Retail licenses are transferable.

  See you soon.

• Computer stops after removing the hardware device.

  Original title: closure of the problem

  Once I am done using bluetooth and easy then disable the bluetooth in my laptop sony vaio, my laptop keeps. It is stuck on the "shutting down" screen and stays just like that. In this case only everytym I use the bluetooth.s

  Hello

  Thanks for asking! If I understand correctly, you have a problem with the computer to close after removing the Bluetooth device.

  Before I continue, I would like to collect some personal information.

  1. Were there of the last changes made to the system before the show?
  2. You get the error message?
  3. The question is limited to specific device?

  Method 1:

  Follow the link to perform a clean boot check, if it helps.

  How to perform a clean boot for a problem in Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 2:

  Follow this update of the driver update Bluetooth drivers. Check if it helps.

  Answer with the results, I would be happy to help you further.

• Installation of Muse (other uninstalled devices failed to install the new device.

  Hello!

  So, I'm almost done with my website... A LOT OF FUN. But I'm on vacation and before I left I uninstalled creative Cloud and the apps that I downloaded if I could install it on my laptop travel at the end. But now? When I try to install MUSE says he is already on both devices, and when I try to uninstall, I am told that I am not on the internet, which I am clearly. How can I do this? He had to do.

  Thank you!

  What is completely independent of post on iTunes?  Some kind of spam...?

• Computer does not recognize the phone when connected via USB

  original title: usb recogonozation

  I want to connect my phone to my pc via the usb port but its upcoming Dungeon with an error stating that my device has mafunctioned or he stopped window. can someone pls tell me what to do? Thank you very much

  As a first step, check for compatibility with Windows 7 at http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx and on the site of the manufacturer of phone support.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound from my computer. I installed the drivers. in the audio preferences, it says "no audio device".

  I have three sound devices: my soundblaster PCI motherboard built in audio (realtek HD audio), and my graphics Nvidia card (via HDMI).

  I installed the drivers for the soundblaster and graphics card. I tried allowing both at the time and only one at a time. not appear as selectable "audio devices" in the audio preferences, but they appear under the "hardware" tab when I activated, I did it has been set to use the mixer for the device.

  When I had to install the realtek driver, the sound test in the driver software would play the sound. but he would not always recognize all audio devices.

  Probably missing me something simple.

  Hello

  
  I suggest you to uninstall all the audio drivers from the computer.
  a. click Start , and then click RUN.
  b. in the RUN line, type devmgmt.msc , and then on enter.
  c. This will open the Device Manager window.
  d. Browse sound, video and game controllers.
  e. right click on each of the drivers see you, and then click Uninstall.
  f. you may asked to delete the driver completely. Please, put a checkmark and complete uninstallation.
  g. restart the computer so that the changes are applied.
  After the reboot, I suggest you to download the audio drivers from the computer manufacturer's website and install the same.
  Restart the computer and then install the drivers for other audio devices
  It will be useful.

• Buning CD error: "Windows Media Player cannot burn the files. ... Install the latest device driver"

  original title: when I try to burn a cd, I get the following message

  When I try to burn a cd, I get the following message: "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. "I just burn a cd of two days using a blank of the same pack then, what's the problem?  I installed itunes.  Could be the problem?

  Hi AnnaMiller,

  You can try reducing the burn speed to see if that solves the problem.

  1 open Windows Media Player

  2. click on the burn tab

  3. click on the burn icon options (windows with the box on the right)

  4. Select burn more options...

  5. click on the burn tab

  6. in the general section, change the burn speed.

  7. click on apply

  8. click on OK

  
  

  If this does not resolve the problem, make sure you have the latest drivers for your DVD drive. You can locate the drivers on the Technical Support Web site of the manufacturer of your computer.

  1. download the driver from the manufacturer's website and save it to your desktop so that it is easy to locate.

  2. click on Start

  3. right click on computer

  4. Select Manage

  5. Select Device Manager

  6. develop CD-ROM/DVD-ROM readers

  7. right click on your device

  8. Select Properties

  9. Select the driver tab

  10. click on set to update driver

  11. Select Browse my computer for driver software

  12. click on Browse > Desktop > and then select the file that you saved

  13. click OK

  14. click Next

  
  

  You can also run the Media Player troubleshooting utility to reset the media player to its default settings.

  1. click on Start

  2. click on Control Panel

  3. Select Troubleshooting

  4. Select programs

  5. Select the Windows Media Player settings

  6. click Next

  7. Select apply this hotfix

  8. follow the remaining instructions.

• Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  8.1 for Windows cannot be installed on my Sony Vaio Duo 13! An error pops up asking me to contact the OEM manufacturer for BIOS update. Checked in the event log and saw this error: Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  Any idea? I'm redownloading the update now.

  More details

  Log name: Application
  Source: Windows Error Reporting
  Date: 17/10/2013-20:26:04
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: SAM-DUO13
  Description:
  Bucket of error, type 0
  Name of the event: WindowsUpdateFailure2
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 7.8.9200.16715
  P2: 8020002e
  P3: 0E51874C-8E6E-47B6-A835-CCAEEF3D9997
  P4: download
  P5: 101
  P6: unmanaged
  P7: 0
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 49ede667-3727-11e3-bea8-fd232fd2f50b
  State: 262160
  Bucket Hashed:
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1001
      4
      0
      0 x 80000000000000
     
      12180
      Application
      SAM-DUO13
     
   
   
     
     
      0
      WindowsUpdateFailure2
      Not available
      0
      7.8.9200.16715
      8020002e
      0E51874C-8E6E-47B6-A835-CCAEEF3D9997
      Download
      101
      Unmanaged
      0
     
     
     
     
     
     
     
     
     
     
     
     
      0
      49ede667-3727-11E3-bea8-fd232fd2f50b
      262160
     
     
   
  

  I found the post on the Sony support site. Give it a try.

  http://community.Sony.com/T5/VAIO-hardware-networking/availability-for-Windows-8-1-upgrade-for-VAIO-PC-s/m-p/204481#M13112

• I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this?

  Ideas:

  • You have problems with programs
  • I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this? messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I installed the Socks5 & IPIG connections & after my vpn connection simply stopped working.

  stopped my VPN connetion working.what I do?

  last night, I installed the Socks5 & IPIG connections & after my vpn connection simply stopped working. I don't know if it's because of Socks5 or IPIG connections but I tried everything, including the restoration of my windows & uninstallimg 2 connections, I even deleted all my internet connections, including vpn & them reinstalled but nothing worked.when I click the vpn connection, it just shows that this message saying could not be contacted.

  is my windows homebasic .plz help of vista...

  Hi Melanie,

  You can consult the following articles and check.

  You receive the error code 741 when you try to establish a VPN connection type PPTP on a computer running Windows Vista

  Troubleshooting remote access VPN

  If you are working on a domain environment, then you will need to contact the system administrator for assistance.

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Install the hardware support for LabVIEW

  When updating to LabVIEW 2013, I asks me to install the appropriate device drivers, but I don't know where to find them.

  On the DVD device driver provided with LabVIEW.  Or you can to http://www.ni.com/download/ni-device-drivers-2013.02/3802/en/downlosd.

• any ideas? Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581). That's what I get away

  Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).

  
  

  any ideas?

  Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).

  How to install and repair 2007 Office features
  http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.