Computer has stopped working properly after a Norton updated.

Similar Questions

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Utility supervisor password Toshiba has stopped working properly.

  has stopped working properly.

  An update is available that solves this problem.

  Press or click on to download the update on the site of Toshiba Corporation

  Download instructions

  1. Tap or click run or Open. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the installation wizard.

  It is a Toshiba program, so the place to get answers to this topic would be Toshiba, not Ms.

• Error - "Kaspersky Anti-virus has stopped working properly." in the Windows Vista-based computer.

  Original title: Phantom appearance of reference of Kaspersky Anti-virus in my system.

  I get a problem report "Kaspersky Anti-virus has stopped working properly." and "to resolve this problem, run the update automatic tool provided with I have never installed this program, and it does not appear in my list of installed programs, in fact I never heard before that." Why do I get this message? What should I do about it? (My security program is Panda Global Protection 2012, if by chance it has something to do with it.)

  I did a full restore, but the error has occurred three times today. I know that Kaspersky is not on my computer and has never been. I think it's a virus. http://imgur.com/vjcgF

• Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

  A problem with your wireless network card Your wireless card has stopped working properly. To see if an updated version of your WLAN card is available

  Hello Jeroen Ratz,

  You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Help! My computer Dell laptop keeps telling me that Windows Explorer has stopped working. After that another pop up immediately comes up saying Microsoft restarts. Any ideas?

  Help! My computer Dell laptop keeps telling me that Windows Explorer has stopped working. After that another pop up immediately comes up saying Microsoft explore restarts. It does not give me enough time to get what in the start menu, I was able to start the virus scan twice but it does not end. When I run it in safe mode, it continues to be. Any ideas? I was able to access the control panel through the Task Manager, but it doesn't seem to be any abnormal process running.

  Hi Roar4life88

  
  1. for how long have you been faced with this problem?
  2. did you of recent changes on the computer?

  Method 1:

  You can perform a scan SFC and check. To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  Method 2:
  Also I suggest you to check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

   

  I hope this helps.

• PX Engine has stopped working properly

  Hello

  Yesterday, I turned my computer off and the next morning, when I first started this new next IE opening the page automatically:

  http://WER.Microsoft.com/responses/response.aspx/17604/en-GB/5.1.2600.2.00010300.3.0?SGD=019a5517-6c13-4507-a7a5-cf09b6fd7470

  By saying:

  Download updates for has stopped working properly. To resolve this problem, see the software Roxio Web site to download and install the update: Click here for online access to the Web site for the Roxio software update instructions And when you click on the link, has been redirected to the following Web site:   http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms By saying: PX engine - Description and download Knowledge base article: 000070GN.   Print this Article   Question Describes the PX engine and where to download them. Resolution Engine PX Roxio/Sonic Solutions, is what allows to burn and compatibility of optical media such as CDs and DVDs. An update of PX engine guarantees full compatibility with the latest players and media. Each new version of the PX engine is backward compatible with all previous versions of the Sonic Software and most of the Roxio software. Here is a list of compatible software titles: Easy Media Creator 7.5 and liked VideoWave 8 and higher MyDVD - all versions RecordNow - all versions DVD for Photostory DVDit - all versions BackUp MyPC - all versions Simple BackUp - all versions Download: Engine PX 4.18.16a (updated 8.18.09) To install the PX engine update: Download the latest version here on your desktop. Unzip the file. Double-click on the .exe installer and follow the instructions on the screen. Note: The PX Engine Setup may require a restart after the installation.

  So, it is a fake website, or is it ok? I'm a little worried, because I have a small Toshiba laptop with no CD/DVD-ROM. And to be honest, a few weeks ago I bought a Microsoft Office 2010 Professional Plus and had problems with the installation. Since then, I got the blue screen twice by saying me serious error. So, would be - that or else, I need to be aware of?

  Thanks in advance!

  Danielle

  ImgBurn does not use the PX engine,

  However other software may install it.

  For example, Winamp can install if you do not uncheck 'Sonic Ripping/ardent support' under 'Media engine' during installation

  I would say that it is safe to install the PX engine update if you're headed there by Windows Error Reporting.

  We could create a system first Restore Point.

  However, the PX engine update is unable to solve the problem.

• Windows has stopped working properly

  "" I have windows vista and when I try to surf the internet, after awhile, it appears as a small windows that says "windows has stopped working properly ' and it restarts not close windows. It started before this date sometimes more often until my pc broke down: it became a flashy blue screen with writing something like problem phsichical... damage discs and now I tried to format it but it seems like the same problem comes up... now I can't download it again up to a certain point It is stackable

  Looks like your system is good enough corupted.  I backup my data and restore the computer to factory settings.  The procedure for this varies from a make and model to another, but should be in the documentation for your computer.

  I hope this helps.  Good luck.

• Get the message "McAfee VirusScan has stopped working properly", but I don't have McAfee

  Get the following reports on the problems and Solutions:

  A problem with

  has stopped working properly.

  McAfee, Inc. recommends that you go online on their site to check the latest updates of information support and product:

  Click to go online on the website of McAfee, Inc. for more information and support options
  I have not installed McAfee!

  Hello

  I recommend you perform the clean boot and check the issue.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Intel IMSM driver has stopped working properly. ___

  Frequently after Windows trying to resume from sleep, I get the blue screen of death and restart my laptop. When Windows restarts, I get an error saying Windows has recovered from a mistake and I followed the steps described below suggests. I did them several times but it keeps happening. Any ideas?

  A problem with the Intel IMSM driver

  Intel IMSM driver has stopped working properly.

  1. Click here to download the update the site of ASUSTek Computer

  2. In the file download dialog box, click run. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     Note
     If you see a Security warning asking if you want to run the software, click run to continue the installation.

  3. Follow the steps in the installation wizard.

  Hello

  I also have the same problem, but my laptop is a Sony Vaio and has nothing to do with ASUS.

  So why it tells me to download a driver for a Sony Vaio Asus?

  ASUS probably makes some parts of your laptop.

• Windows Defender has stopped working properly

  When I turn on my laptop it user interface say that windows defender has stopped working properly, can not open windows defender to look at settings etc and since it has stopped working the computer guard stopping self to protect self, someone at - it ideas? It also came with "" error 0 x 80000003: one or more arguments are invalid '? "

  Hi richard.weeman,

  Try to restore your computer to a previous state of safe mode.

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer
  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
  3. ensure that the safe mode option is selected.
  4. press ENTER. The computer then begins to start in safe mode.

  Follow the instructions below to restore your computer to a previous state of safe mode.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. in the System Restore dialog box, click Next.
  3. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  4. click on finish.
  5. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  If this does not work, follow the instructions in the link below to perform clean boot in safe mode.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Office Pavilion Elite HPE message: AMD/ATI Video Driver has stopped working properly

  I have a Windows 7 Desktop HPE-410y, this morning, that the flag of the action center was at the bottom of the screen.  I clicked on it and there was a message: AMD/ATI Video Driver has stopped working properly.  He also said I should click on a link for a solution to this problem, but of course when I made the site of HP said that the page does not exist.

  Maybe say if you have in fact noticed nothing else Action Center indicator would be useful.  If it seems to you that the computer was OK and run satisfactorly, then perhaps he had already solved the problem.  Usually reviews can occur if a program did unexpected things and crashed the video driver, then the driver recovered.

  HP site can be set to an old page.  The real driver has not been updated recently on the HP site.

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista has stopped working properly

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  "pastafasul" wrote in message News: * e-mail address is removed from the privacy * .com...

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  If you see the icon on the desktop, do a right click on that and then left click on properties. The window that opens has all the information you need.
   
  If no icon, and then start Windows Explorer and right click on computer it followed by the left-click on it.