Computer HP laptop, computer cannot establish communication in both directions with the device (printer)

HP laptop, Windows 7-64 bit, no changes to the system before the problem occurred.

Printer: HP Photosmart Plus B210a all-in-one series.

When I click on my ink for my printer in my computer, it goes to 63% and stops. Then, he said. The computer is unable to establish communication two-way with the device. All systems are running, and there is no reason that I have a problem.

I can print, Fax and Scan, I get blank printer paper, printer is not stuck, nothing in the queue to prevent it from printing. It will not just show my ink from my computer.

Advertisement

Just try to uninstall the printer from Control Panel drivers and reinstall again.

Tags: HP Printers

Similar Questions

  • Dc7700 computer. Error COmmunication Simple PCI controller in the Device Manager there is an error.

    Just installed Windows 7 64-bit.

    Simple properties Communications controller PCI hardware ID is

    PCI\VEN_8086 & DEV_2994 & subsys_2802103C & REV_02

    PCI\VEN_8086 & DEV_2994 & subsys_2802103c

    PCI\VEN_8086 & DEV_2994 & cc_078000

    PCI\VEN_8086 & DEV_2994 & cc_0780

    ...

    What can I install to get rid of this warning on my dc7700 computer.

    The simplest method would be to disable it in Device Manager.

    This device is the plain old telephone modem (POTS). Most of the people do not have to do this. If you need it below, this sentence

    The drivers are available here. Select your version of Windows 7, download the driver and install it.

  • Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

    Original title: printer problem

    "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

    Hello
     
    1. What is the brand of your printer?
    2. when the question is is produced?
    3. you remember to make changes to your computer before the problem?
    4. when exactly you get this error?
     
    I would temporarily disable all security software and check if the problem persists.
     

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    If you have an HP printer, you can consult the links below.
     
     

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

    My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

    Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

  • Error "Unable to establish two-way communication with the device" Windows 8 with c309g

    Operating system: windows 8, 64 - bit

    computer: desktop

    Home network: network, the computer is on a wired connection, printer is on a wireless connection

    error message: "the computer is unable to establish two-way communication with the device.

    • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
    • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
    • We tried to print the page of the computer instead, but the task has failed.
    • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
    • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

    any ideas on what to do next?

    My brilliant husband fixed it. Power cycling the router.

  • Unable to connect when I try to sign, he said: "your computer is offline. Please sign in with the last password used on this computer. »

    Original title: Unable to connect

    Ok. So I'm having a few problems to connect to my computer windows laptop 8. I have reset my password like 5 times, restarted my computer over the same period of time, and I can not even sign. When I try to sign, it says: "your computer is offline. Please sign in with the last password used on this computer. "Well, I don't know what was the last password. I'm sure that the last time I registered on my laptop, I used the PIN that I used to have for her. The only reason why I changed it was because I wanted it to be more difficult to get into my PC. But I wanted more difficult for other people, not more difficult for me. Can someone help me with this please?

    Hi Arianna,.

    Thanks for posting your query on the Microsoft Community.

    I understand the inconvenience caused to you. I'll be happy to help you with your problem.

    I suggest you refer to the suggestion given in the thread and check out them below if it can help solve your problem:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/whats-the-fix-for-your-PC-is-offline-please-sign/fd7dc731-6e23-4044-BFEE-dd8fbb42fc32

    Let us know the status of the issue. We will be happy to help you further.

    Thank you.

  • Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

    Original title: internet connection problem

    Hey,.

    I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

    1. Windows cannot communicate with the device or the reaource (primary DNS server)

    2. the connection between the Internet and your access point, router or cable modem is broken

    3 problem with access point or wireless adapter

    I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

    Hello Hildegard Lydia,

    You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

    What is the brand and model of your computer?

    Please follow the steps mentioned below:

    Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
    I suggest you try to reset the TCP/IP stack.
    http://support.Microsoft.com/kb/299357

    Method 2:

    I suggest that you refer to the following link:

    Why can't I find a wireless network?

    http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

    Method 3:

    See the steps in the following link and check:

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Please an update on the status of the issue to help you further.

  • Cannot communicate with the device or resource - primary DNS server

    I have problems with my laptop using windows 7.
    I was able to connect to the internet until the 19/08/12 to the evening.   After having been online earlier that evening and closed, I rebooted the computer and found my computer connected to the wireless network but had access to Internet 'No '.
    Network Diagnostics has revealed: "Windows cannot communicate with the device or resource (primary DNS server). I had a full signal strength and I introduced myself to be connected to the network, but there is "no internet access.
    I have several computers and have no difficulty in connection with any other device (computer, video streaming, phone), to the internet through the network, home.
    I tried and am not able to connect wireless or ethernet over any network cable (tried 3 others) but can connect to these networks using other computers, telephone, etc.
    I have not recently installed/uninstalled anything.  System Restore says the last restore as on 15/08/12 point.
    Thank you.

    Hey, I uninstalled McAfee and that solved the problem.  Thanks a lot for the suggestion and encouragement.  I'm back online.

    Thank you again... Success!

  • Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

    Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

    Hi Rachel,

    I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

    • Using a cable or a wireless Internet connection?

    DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

    I suggest you to follow the methods in this article and check if it helps.
    http://support.Microsoft.com/kb/2779064/en-us

    Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

  • I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

    I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

    You can create word documents and powerpoint presentations, but you cannot save them directly on a normal USB.

    Microsoft made a version of office for iPad, you can find it in the App Store. Here is a link:

    Word

    https://iTunes.Apple.com/en/app/Microsoft-Word/id586447913?Mt=8

    PowerPoint

    https://iTunes.Apple.com/us/app/Microsoft-PowerPoint/id586449534?Mt=8

    There are usb drives that work with iPads, and you can save documents to those who use their own applications.

    http://9to5Mac.com/2015/03/20/the-best-iPhoneiPad-USB-flash-drives-with-Lightnin g-connectors.

    Also I suggest you read through the iPad User Guide:

    http://help.Apple.com/iPad/9/

  • Windows cannot communicate with the device he resourse (primary DNS server).

    Original title: primary dns.

    Help, please

    Windows cannot communicate with the device he resourse (primary DNS server)

    Please help me solve this problem

    If you see a 'FON' signal wifi on your PC and you have signed up to "FON", you should be able to connect to it.

    If you look on your BT router (or router you pay BT for the primary connection) on its homepage it should show something like "State of the Wifi BT. If it is active, you should be a member "FON", if it is not active then you need to register and agree.

    BT has their own support forum if you have not already tried it - https://community.bt.com/

    See the FAQ here - http://www.btfon.com/support to ensure that you are connected properly.

    in particular:

    How can I connect once I connect to the correct Wi - Fi network?

    Once you are connected to the correct wireless network, launch your browser. This should load the Fon login page. Select Fon among the three options on the login page, enter your e-mail address and password and sign in. Launch another browser and you are ready to access the Internet

  • Cannot get EPSON BX305FW to work with the new computer advent DT3411.

    Bought a new computer advent DT3411 today and am trying to connect my printer (Epson BX305FW) but zero!, grateful for the help, tried to connect with printer USB and the Epson software in the drive of DVD, but just get a white screen.

    Hi Laurent,.

    I suggest to perform the clean boot and then try to install the drivers.

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135

    Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

    Driver download link: http://www.epson.co.uk/gb/en//viewcon/corporatesite/products/mainunits/support/3979?searchKey=EPSON BX305FW

    See also the link: http://www.epson.co.uk/gb/en/viewcon/corporatesite/products/mainunits/faq/3979/5852

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • Cannot establish network connection. Messages on the icon alternate between "Acquiring network address" and "unplugged network cable.

    Original title: cannot establish a network connection

    Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?

    Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:

    Diagnosis of IP Configuration

    Invalid IP address

    Info

    Zero (0.0.0.0) detected IP address

    action

    Auto repair: renew the IP address

    action

    Release the current IP address...

    action

    Successfully published the current IP address

    action

    Renew the IP address...

    error

    Error to renew the IP address: the semaphore timeout period has expired.

    Info

    AutoNet address detected: 169.254.225.103

    action

    Auto repair: reset the network connection

    action

    Disabling the network card

    action

    Activation of the card network

    Info

    Successfully activated network adapter

    Info

    Zero (0.0.0.0) detected IP address

    action

    Repair Manual: Reboot modem

    Info

    AutoNet address detected: 169.254.225.103

    action

    Auto repair: renew the IP address

    action

    Release the current IP address...

    action

    Successfully published the current IP address

    action

    Renew the IP address...

    error

    Error to renew the IP address: the semaphore timeout period has expired.

    Info

    AutoNet address detected: 169.254.225.103

    Info

    Redirect the user to support call

    WinSock status

    Info

    All base service provider entries are present in the Winsock Catalog.

    Info

    Winsock Service providers strings are valid.

    Info

    Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

    Info

    Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

    Info

    Entry provider RSVP UDP Service Provider managed the loopback communication test.

    Info

    Entry provider RSVP TCP Service Provider passed the loopback communication test.

    Info

    Connectivity is valid for all Winsock service providers.

    Diagnosis of network adapter

    Network location detection

    Info

    Using the Internet connection at home

    Identification of network adapter

    Info

    Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN

    Info

    Ethernet connection selected

    State of the network adapter

    Info

    The network connection status: connected

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity

    warn

    FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

    warn

    HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

    warn

    HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

    warn

    HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved

    warn

    FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

    warn

    HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

    error

    Could not make an HTTP connection.

    error

    Could not make an HTTPS connection.

    error

    Could not make an FTP connection.

    I found the problem (s), even if I am always left with a few questions.

    During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.

    The solution:

    (1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.

    (2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.

  • Computer is stuck on "Microsoft Corporation" logo with the on-screen scroll bar, a green.

    Hello

    I had difficulties to get my computer past the "Microsoft Corporation" logo with the on-screen scroll bar, a green one.

    I searched the forum and found others who have had this problem. I tried some of their proposals, but eventually Windows does not run on my PC.

    It seemed a moment have solved the problem, but my AVG security had been removed. When I arrived the AVG security working properly my computer starts a few times more, but now I'm right back where I started.

    Is it possible for me to turn this thing on, but not in Mode 'Safe '? I am sick and tired of trying to connect, or try to understand this problem.

    I wish I could just take my computer to where I bought it and get my money back. Unfortunately, the warranty period is exhausted on my PC, so I'm stuck with it.

    I use Windows Vista Home Premium 64 bit, I don't know if that makes a difference?

    Any suggestion would be appreciated.

    fq283

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

    computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

    To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
    Help would be much appreciated?

    Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

    Thanks for the effort though...

Maybe you are looking for

  • HP 5524: Change printhead HP5524

    I am not able to print red graphics or text, it comes out yellow. I suspect that the part print head Megenta is blocked. I tried to use the CleanPrinthead of the printer option, but this does not seem to solve the problem. I saw that a new printhead

  • Where can I find the tutorial or sample Vi to control the position and speed of the stepper motor?

    Hi all I use a driver on 3rd for a stepper motor and I use USB6356 as the controller to drive the motor. Could you recommend some VI sample or tutorial on the position and the speed control of stepper motor? Thank you The best

  • my wireless radio does not work

    My transreciever Wireless does not work for model 1000 keyboard and wireless mouse. I am trying to find repair services near my position, but he could not find cause we get away from the location of what they have officially mentioned on the website

  • If I immediately stripped a screw inside my W530 head...

    It's so terrible. Then I begin to install my ram and follow the instructions to remove the keyboard. Everything's fine until the second screw (inside rampanel) keyboard for some reason any would not budge. Inaively just tried harder and stripped of t

  • Porting, which is developed in BB JDE 4.7 in Blackberry Torch

    Hello I put a BB JDE 4.7 application I tested the app in the Simulator 4.7.0 The application has a basic user interface (buttons, choice fields, change fields and three screens and pop-up windows) It is an application to send and receive messages of