computer HP laptop dv6 boot selection failed because a required device is inaccessible

Similar Questions

• Presario CQ61-312SA boot selection failed because a required device is inaccessible

  I get the message "boot selection failed because a required device is unreachable" on my computer laptop presario CQ61-312SA. I don't have the CD containing the disks but I do not have a premium Windows 7, 32 and 64-bit family OS disk. I tried to restore to former factory settings using f11 which does not reach 50%.

  Hello

  As I see that the hard drive on your unit has failed you need to replace the hard drive, then reinstall the operating system on your device then only unit will return to operational status.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• HP 2000-329WM laptop: could not start error Info: the boot selection failed because a required device is not accessible.

  Hello. First when I started my computer this is a white screen. After doing a hard a reboot screen pop up saying:

  Windows could not start. A recent hardware or software change might be the cause.

  He told me to insert your windows installation disc (which I did not).

  He also says

  Status: 0xc000000f

  Info: The boot selection failed because a required device is not accessible.

  Whenever I try to boot normally, it wouldn't let me.

  Hello

  You can use a repair disc. To obtain a repair disc, find someone with the 32-bit Windows 7 computer and create a system repair disk to repair your problem.

  This link will help you...

  http://maximumpcguides.com/Windows-7/create-a-Windows-7-system-repair-disc/

  Checkurtech

• the boot selection failed because a required device is not accessible

  Hello

  I give my 15 years old nephew an old laptop so I am trying to run a system recovery and restore it to its original state factory.

  As soon as I clicked on Recovery Manager > System Recovery > restore to their original factory condition, I get a screen with this message Windows Boot Manager:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer. (don't have)

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have this disc contact the Adminitrator's manufacturer or a computer in your system.

  Status: Oxc0000225

  Info: The boot selection failed because a required device is not accessible.

  Is there a way to get around this. I would get to it as soon as possible, but I want to wipe all my info beforehand.

  Thank you!

  Karen

  try to perform the recovery by using the partition.  boot f11 and recovery manager must take over. If not, or if the process does not finish successfully, perform a large hard drive. If the test successfully you will need to order a copy of your HP recovery disk.

  as an alternative, you can create a new admin account and simply delete your existing account after.

  hope this helps

• "0xc000000f the boot selection failed because a required device is not accessible."

  "0xc000000f the boot selection failed because a required device is not accessible" I'm not able to use the installation disc that my CD/DVD drive has failed. Is there a way to create a bootable via a USB disk and the PC started?

  Windows Vista.

  Hi Anand,

  The error "0xc000000f the boot selection failed because a required device is not accessible" is related to the error in the hard drive that is required to start.

  Steps to create a bootable USB stick with Windows 7

  As the CD/DVD drive does not work, you can create a bootable USB drive using which you can repair this problem.

  Before you create the bootable USB key with Windows 7, you can download Windows 7 from the link

  provided below.

  http://www.microsoftstore.com/store/msusa/en_US/PDP/ProductID.253735200

  Use the Windows 7 USB/DVD tool to create a USB bootable with Windows 7.

  Here is the link that will help you to create a bootable USB.

  WINDOWS 7 USB / DVD DOWNLOAD TOOL

  Steps to fix the problem with the error code

  After you create the bootable USB key with Windows 7 you can insert it in the boot of the computer, and then press F12 to go to the boot window priority and change the priority of Boot on USB.

  a. After you change Boot priority on USB that is usually at the last, the computer will boot using the USB and it will take you to the page where in the GUI (Graphical User Interface), it will display the install now option.

  b. here you must select fix you the computer from the bottom left.

  c. This will take you to the WINRE (Windows Recovery Environment) window that offers different options

  d to fix problems with Windows.

  e. in WINRE, select the option that reads the command prompt and type the following command.

   

  Chkdsk /f /r

   

  Note:

  The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

   

   

  It will be useful.

• Startup Repair fails, the boot selection failed because a required device is not accessible.

  Hello all,.

  I have windows 7 Home premium 64-bit on dell PCs.  I lost power then in the middle of the update to windows 10.  Now, I'm stuck on the windows Boot Manager screen and the windows error recovery screen.  When asked ¨launch startup repair, ¨I get then message ¨the boot selection failed because a required device is not accessible. ¨ When asked ¨start windows normally, ¨I get same selection boot error message.  I have my disc to install windows 7 HP, but I can't get the pc able to read the disc.  I tried the key windows and ¨r¨to get a prompt to read the disk, but it does not work.  I tried the hard stop pressing the start for 10 sec button, but it does not restart the computer.  I unplugged the computer in hopes that it would help restart, but this doesn´t work.  I am stuck in windows boot manager purgatory - Help!

  Hello

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your Dell computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to problem starting Windows. I will definitely help you.

  This problem may occur because of damaged or missing Windows startup files. This can also occur due to damaged MBR (Master Boot Record).

  I suggest you use the bootrec.exe tool and check if that helps.
  Refer to this article:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  You can create the Windows 7 installation media using this link.
  Reference:
  https://www.Microsoft.com/en-us/software-download/Windows7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• P850 satellite - failure with the recovery partition - boot selection failed

  Hello Hello,

  My problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :
  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact the manufacturer administratos or your system's computer.

  Status: 0xc000000e

  Info: the boot selection failed because a required device is not accessible.

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not me, work, when I go to see the Recovery Console:
  * Startup Repair
  * System restore
  * Restore
  * Tool of Diagnoctic memory of Windows
  * Command line

  Hello Hello, my problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :

  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem: *.

  1. Insert your windows installation disc and restart your computer

  2. choose your language setting and then click "next". *

  3. click on "Repair your computer." *

  If you do not have this disk, contact the manufacturer of your system administratos or computer for assistance.*

  Status: 0xc000000e *.
  Info: the boot selection failed because a required device is inaccessible.*

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not my work.

  Recovery Console has these options:
  option 1: Startup Repair.
  Option 2: System Restore.
  Option 3: image retrieval system.
  Option 4: Windows Memory Diagnostic.
  Option 5: command prompt

• Computer HP laptop dv6, windows 7 crashes on closing

  Hi everyone, I bought a hp dv6 6c43cl laptop, sometimes I stop it it crashes on stop, then I had to kill by manually turning off the switch, please someone help me, what is a window problem or a hardware problem? What should I do? Please help, laptop is corei5, 8 GB of ram, and 750 GB hard drive

  Hello

  It could be a windows problem or could also be a hardware problem as well; It is hard to know, at this time, what is the cause of the problem.

  However, you can follow the methods mentioned below and see if that fixes the problem.

  Method 1: You can not make a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Method 2: Try closing in safe mode and see if stops without hanging.

  Step 1:

  Reference:

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  If step 1 work, try step 2

   

  Step 2: A clean boot to test if any element of service or third party application startup is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

• Computer HP laptop windows didn't load because the HAL is missing or corrupt

  I have a HP Pavilion dv6605us

  Windows Vista

  Error message I get is:

  File: \Windows\System32\hal.dll

  Status: 0xc000000f

  Info: Windows could not load because the HAL is missing or corrupt

  The changes that I do is I did a clean install of Linux deleting all partitions including the HP recovery partition.

  Now that I have to go back to Windows, I used the recovery disks that I did when I bought the laptop. It took about 24 hours to completely install, then I got this error message when you restart.

  Help, please

  Best thing to do is to nuke the drive,then reinstall Vista again.

  I know it's a long process, but you should get back to run.

  Linux makes strange recovery partitions does not understand and they are deleted correctly, boot and nuke will take care of it.

• computer hp laptop dv6 with a speaker Bose Soundlink Mini bluetooth pairing

  I want to connect my HP dv6 with a Bose Soundlink Mini bluetooth speaker.

  I can't... very frustrating.  I matched the small Bose speaker on my phone very easily.  BUT, to my laptop... can you help please. Thank you

  Hi Jean-Guy and Pinehurst_Ken,

  It is not as if these speakers Bose will work with a laptop. I came across two other topics where people have the same problem. Another person in our office has the same speakers and those who does not connect to laptop directly on their MAC or Windows.

  Thank you

• question about my computer motherboard laptop dv6-7213nr of HP ENVY

  Hello all I'm new here but I have been using computers laptops hp for the years and love

  anyway I was doing research on my motherboard for laptop and I came across something interesting, but it confuses me also from what I can tell that the CPU is soldered to the Commission which sucks I wish I put the cpu to an a10 to make quick lol

  But what caught my attention is there are a grip also on the card that says cpu2 beside it, can someone explain this than her for please

  Thank you

  I need a picture. The CPU on a dv6-7000 is not welded to the card. This is the reference number of the Council:

  682180 501

  Here are the Board of Directors:

  

  Where the CPU2? The big white thing holds the CPU and you could install this:

  AMD A10 - 4600M 3.20 GHz processor (FSB 1600 MHz, 4: 0 - MB L2 cache, DDR3,
  quadruple - heart, 35 W) 683046-001

• How to use the recovery partition recovery files in computer hp laptop dv6 in windows 7

  I'm trying to find my laptop to factory settings without using recovery disks in windows 7.
  but using whenever I try to recver in file recovery system in Control Panel, when the computer restarts it says that there is no bootable media or recovery disk.
  When you use the Recovery Manager, it says the system recovery is disabled try to use recovery media creation but the creation of recovery media said that the recovery media has already been created once and it can not be recreated.
  whenever I open the recovery file on the hard drive of the score, he said, this partition is for recovery donot change or remove this partition. He covered about 10 GB of space but whenver that I open it, the file is empty and hp logo appears with instructions that his is set for partition donot change it.
  can someone tell what to do?

  Have the hard drive in the dynamic State breaks the recovery feature. Conversion of back to basics should not delete your data, unless the data is on the extra partition, you have to remove to get the disk hard back to base.

• drivers for computer pavilion laptop dv6 6120se for windows 8

  why I do not found drivers for windows 8 on my laptop

  Hello

  No Windows 8 drivers in charge as indicated:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & LC = in & Product = 5169887

  What's missing?

• device audio HDMI not connected to computer windows laptop dv6-6c10us 7

  Can't hear audio on tv when I connect hi def cable. Entered the speakers, reading devices and he said amd peripheral salvation of output not connected. So, how do hip?

  Hello nancyv,.

  I just want to be able to check before you go further than you use a HDMI cable and not something like a DVI connection.

  You will be able to look at the HDMI connectors from the following link: http://support.hp.com/us-en/document/c01409647

  If you use an HDMI cable, in fact, follow the steps from the links below:

  1. Update the BIOS.
  2. HDMI display resolution and problems of his (Windows 7 and Vista).
  3. No sound in Windows.

  I would like to know if it works!

  Thank you

• After formatting my computer pavilion laptop dv6 2171ee wifi does not work

  as what I said in the topic

  the wifi doesn't work do not

  I did some research but I couldn't find the right driver

  This my Fri

  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086 & REV_35

  any help please?

  Hello

  The support site shows nothing for reader to Intel, which means machine you need to pick up automatically:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01973748&lang=en&cc=us&TaskID=101&prodSeriesId=4041735&prodTypeId=321957

  Anyway, you can use the following link to download the driver for your machine:

  http://www.Intel.com/p/en_US/support/highlights/wireless/can-6200

  Kind regards.