Computer HP laptop, G7-1365dx has no power on the USB ports

Similar Questions

• KDL-42W700B giving power to the USB port in standby mode

  Hello

  My new KDL-42W700B giving the power to the USB ports even mode standby.

  I connected internet USB dongle and when I exit tv, as its getting power internet connectivity continues.

  Called the customer service about cela and they claim that TV sends power to ports USB is the characteristic of the TV and Sony engineers designed this so.

  I've not seen such lame feature anywhere in any model in other brands, but also Sony models too.

  I checked the earthing of the power outlet power. Its perfect.

  Is this a problem with my TV or something else? Please give me the solution

  Thanks in advance

  Bharath

  It does not occur for other models

• Keep the power to the USB port after stopping down?

  I would use one of the USB ports to plug in my cell phone to load from one day to the next off the computer. What are the steps to follow to set computer to keep providing power via USB ports after shutting down the computer?  I'm a novice so need to know where to find the place that controls the settings and what to click on. Thank you!

  If you put the computer in Standby Mode when you stop, the USB ports are not powered off.

• I am running windows XP and my computer freezes when I connect my sansa view to the USB port.

  Only, it crashes when I connect any sandisk MP3 player and any other computer that I have connected the MP3 player to a hanging. This problem started about two weeks ago after installing service pack 3 for XP.

  Hello Kellendil8,

  Thank you for your message.  Please, try the following:
  Click 'Start' > click 'my computer '.
  Click on 'Tools' > select 'Folder Options' > click the 'View' tab > under "Hidden files and folders", select "Show hidden files and folders" > click "Apply & OK.
  Double-click on "C:" > double-click "Documents and Settings" > double-click "All users" > delete the DRM folder.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP 15-f024wm laptop computer: laptop does not recognize the SD card into the usb port

  I don't have a sd card reader on my laptop but have used a map on her usb adapter and it worked. I had to make a full recovery, update and reload the browser and so on. HP has spent hours helping me to get back to his normal race car computer... but this issue remains and can't find what I need to do the usb - SD card reader. Yes, the usb port works as I use it for other things.  Don't know what I'm missing.

  Hello

  Your machine IS not card reader. His record:

  http://support.HP.com/au-en/document/c04420347

  which indicates:

  External ports:

  • Multi format digital card reader for Secure Digital cards
  • 2 superSpeed USB 3.0
  • 1 bus (USB) 2.0 universal series
  • 1 HDMI
  • 1 PORT RJ-45 (LAN)
  • 1 plug headphone-out/microphone-in the drop-down list

  Location:

  

  Everything you need: download Driver Realtek card reader and install it on your computer.

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66959.exe

  For your question: all the USB ports work?

  Kind regards.

• Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Did you use the recovery process HP plant or install using a different operating system disk? If the latter, you need to install the drivers for all your hardware, including drivers for wireless network cards. You will get only the pilot specific support for your laptop model HP Web site tech.

  If by "wireless card" you mean that you have a 3G USB modem through your cell phone provider, contact the cell phone provider for help with that. MS - MVP - Elephant Boy computers - don't panic!

• "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator' associated with the USB

  Error: "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.
  When I try to access a USB key, I'll on my computer and click on the link for 'Removable disc' open the file. However, a message of 'Restrictions' appears which says "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. But I am the administrator of the system for this account and I don't remember to restrict access to one of the USB ports...
  I already looked on the control panel under "User accounts", "Administrative Tools" and "Device Manager" and had no chance of finding a solution.
  I tried another solution given by one of our friend, but to no avail.
  I would appreciate any other advice given

  Hello

  It seems that software USB Disk Security is has not been completely uninstalled from the computer. So I would ask you to contact the manufacturer of the USB Disk Security software to uninstall the software and for additional assistance.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• BlackBerry Smartphones recharges via the USB port connected to the laptop Desk/computer

  I read a few discussions about this, but did not come away with a clear understanding.

  If I plug my BB in the computer, is the BB battery supported?  When it is plugged and I sync, does this drain also the battery, or simply fees trickling in to face?

  Thank you

  Chris

  If you have loaded and installed DM, it loads the appropriate drivers to put the USB ports. You are well.

• Satellite M30X powers off the power when you touch the USB port

  Hello everyone, just registered and it is the first problem:
  As there is no general hardware forum, I post my problem here.

  I got it twice, my laptop
  (Product: Satellite M30X, Version: PSA72E - 008010GR) just went completely off.

  Motherboard:

  NorthBridge: Intel i855GME
  SouthBridge: (ICH4-M) of 82801DBM LPC Interface Bridge
  Motherboard model: Toshiba EAL20

  USB:

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI controller #1-3
  Version: 1.0
  Interface: UHCI
  Frequency: 48 MHz

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI controller
  Version: 2.0
  Interface: EHCI

  I have the latest Intel Chipset drivers installed and Windows XP Home SP3 with all updates.

  Once when I hit just the back USB ports with a USB plug, the other time when I unplugged my bluetooth key (climbing din't remove it).
  There was no blue screen or message of any kind, not even in the registry after you start the system again or this fatal system error box when you start after a system error.

  Just a total failure. But it works fine the rest of the time. I also tried to remake the script, but it didn't work.
  I have cleaned with a vacuum cleaner to remove dust and has taken a good look, but saw no difference to the side track.
  Maybe the clamps of the wand to shield a little more out to the contact pins on the rear.

  What bothers me a bit, it's some time ago, I had the laptop one computer my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.
  Still works well. Now for me, that I broke the USB port Insider somehing.
  I could not determine also the loose parts or unfirm at all.

  Y at - it there, diagnostic software that measures the motto of the port or power problems?
  I have a multimeter, fetch short-circuits with it?

  I saw a package of drivers Intel for USB 2.0 over there, but I can't find it on their page, advice?

  Thank you very much for your help, I just wanted to update my RAM and now I am not so shure if my laptop will last the next week.

  Fabian

  Hello

  I put t know any diagnostic software that could analyze this question, I think that a technician of the ASP may be able to provide exactly this question results

  > What bothers me a little is that some time ago, I had the laptop and my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.

  I think this might be the reason why the laptop stopped while you touch the USB port eventually ports were damaged by using the memory stick, this could cause the laptop off

  However, what we can do is to provide some suggestions and assumptions
  It you want to know why this is happening exactly, then you need to contact a technician laptop for a control.

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.

• Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

  Original title:

  First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
  and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
  (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

  in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
  "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
  so I click it and and called up pop-up windows
  "the usb device not recognize."
  display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
  Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
  "Windows has stopped this device because it has reported problems. (Code 43) »
  Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

  Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

  Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

  • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
  • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
  • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
  • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
  • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
  • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

  Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

  Hello

  The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

  http://WWW8.HP.com/ca/en/support-drivers.html

• NEX - 5N, unrecognized by the USB Ports of the computer

  I have a laptop Asus UH56e which became more and more incompatible with my NEX - 5N. Is not what USB port, I plug the NEX in, or what USB port in my 4 ports USB hub, I plug in, the camera is not recognized by Windows 7. I try to install the new update of firmware and can't even get past the first step, which is the connection to the computer. Is there anywhere I can download the driver for the NEX - 5N install on my laptop? It seems that the driver is not install from the camera, or is not recognized by Windows 7 (64-bit).

  Yes, it shows USB MTP Mode, but it does not connect to Mass Storage. By clicking import images and videos results in no new pictures or videos found on this device, despite the fact that there are pictures in the camera. Click Browse files and media then, however, shows the folder and clicking on that, I can see the image files and copy them to a folder on my hard drive. Yes, I tried to update the firmware several times, but because the camera is not recognized by the USB ports, the camera is not found by the firware update, either. Yes, I unplugged the USB hub and all other devices and also makes no difference. I don't have another USB cable, however. I have access to another PC Thursday, so I'll check then. Thank you, Glenn.

• the usb ports and DVD drive on my laptop of ts 17 want does not work correctly.

  My laptop dvd player cannot read software, flash drives and card readers and other usb devices d0esn ' t work correctly when inserted into the usb ports. I opened the Device Manager and noticed that the uj8c2 of ram dvd has a yellow triangle below. I clicked it and the State of the device as follows: WINDOWS cannot CE HARDWARE NOT CHARGE THE DEVICE. THE DRIVER MAY BE CORRUPTED OR MISSING. (code 39). the error status was ox x %. Today, I downloaded technical assistance from hp and when he ran a check on the system, it recommended two options for downloading 1. HP NOTEBOOK SYSTEM BIOS UPDATE (processors intel). 2 HP PC HARDWARE DIAGNOSIS UEF. I tried to download but were not available. I don't know if this problem can be corrected by the Manager of recovery so please let someone help out me. This month will be the third month, since it was purchased. Thank you in advance for your answers.

  Hello:

  For the DVD player, please try troubleshooting step 3 on the link below.

  http://support.Microsoft.com/kb/314060