Computer HP laptop will not read my DVD more?

Similar Questions

• my computer dell laptop will not play a dvd or cd... when I open windows media player, nothing happens

  When I put a cd or dvd in my computer dell laptop with windows 7... nothing happens... and when I open windows media player does nothing... no error message... nothing appears on the screen... It is as if the program does not exist yet... when I try the resolution of problems and he doesn't find anything wrong... can someone help me

  When I put a cd or dvd in my computer dell laptop with windows 7... nothing happens... and when I open windows media player does nothing... no error message... nothing appears on the screen... It is as if the program does not exist yet... when I try the resolution of problems and he doesn't find anything wrong... can someone help me

  ===================================
  If you insert the DVD in your DVD drive and go to...
  Start / computer... and on the left, click on the drive letter
  the DVD player is in... He launched the DVD?

  Maybe your AutoPlay settings must be changed:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

  Still without success:

  Take a look at the following article:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• Computer Toshiba laptop will not collect CD/DVD player

  Toshiba Satellite L305D-S5897. All of a sudden my laptop had some problems to stay connected with my CD/DVD drive. Its a Matshita dvd ram uj 850 s. sometimes, he disappears on the no hand, unexpected. I played a game yesterday and the game comes close to the top on its own, not even an error note or anything like that - it lacked the drive. I already tried Microsoft fix - it program and it usually solves the problem, but after a few minutes or something, his party once again. And then the register, there was only a higher filter, not a lower filter, and I deleted it. I restarted my computer, and I saw the disc written twice in my computer, then they both disappeared. And finally, I deleted iTunes because of what I read about it affecting the status of the drive. Helped for maybe an hour or two, then he disappeared. Are there other ways to solve this problem? I hope this is enough information.

  Hello

  iTunes and others, especially when there are several, CD/DVD programs will compete
  for resources that can lead to strange problems with readers. You have more than a couple
  other than the features included in Windows?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ===============================================================

  If necessary:

  Check with Toshiba support, their drivers online (update or reinstall) and their known forums
  problems and possible solutions.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• My laptop does not read the dvd, but another laptop computer bed. PL advise solution. Thank you

  My laptop is Pressario V2000. My laptop does not read the dvd, but another laptop reads the same dvd. PL is the solution. Thank you

  Try another DVD to verify that your laptop can read at least the other DVD.  If he can't play other DVD's then you need to replace the DVD - CD ROM drive supplied with your Pressario.

  Another thing you can try is to check fingerprints or scratches on the DVD, some DVD players are more sensitive than others.

  J W Stuart: http://www.pagestart.com

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• My E drive will not read the DVD-RW/DVD-ROM

  So here is the problem
  I have a vista Home premium 32-bit with sp1 computer laptop
  who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
  but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

  I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
  the CD turns, stops, turns, makes a strong ' loading ', but stops then
  nothing happenes
  I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

  Help, please

  Hello, tyINtrouble

  The device is listed as a DVD player?

  You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

  You can also check your connections are secure.

  If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

  If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player XP Professional will not read the DVD.

  I can't get my Windows Media Player XP Professional to play DVDs.  The system is only a couple of years and it used to read discs, but for several months, it is no longer made.  WMP keeps my music library and can play these songs without problem, but it will not play a DVD.  Why is this the case and I need to do about it?

  Robert

  I can't get my Windows Media Player XP Professional to play DVDs.  The system is only a couple of years and it used to read discs, but for several months, it is no longer made.  WMP keeps my music library and can play these songs without problem, but it will not play a DVD.  Why is this the case and I need to do about it?

  Robert

  =====================================
  You may have a problem with the hardware with the DVD drive...
  If you have two DVD players... try this one.

  The following article is maybe worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Or... maybe you need a DVD decoder:

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  And you should be able to read your DVD with the
  free VLC Media Player:

  VLC Media Player
  http://www.videolan.org/

  Might be interesting to try to download and install the
  following codec pack:

  * Proceed at your own risk *.

  CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• DVD player will not read burned DVD again.

  I have Windows 8.1 and a his Ashley Soundblaster card.

  PrPro CC project: imported from motion picture film at home (DVD NTSC), edited, and soundtrack.

  Transcoded with Media Encoder.

  Imported as the timeline again: added, any chapter markers the PSD as Menu and related chapters (etc.) then engraved on DVD.

  DVD only plays in your computer (Windows and MAC), not in a DVD player.

  Because the help files are really not very useful (must be in business somehow with Lynda.com), I looked at various things. I do not know who exactly fixed the problem, but here are some of the things I've done:

  (1) in PrPro CC, chronology selected then file > export > Media. Is nothing new.

  (2) in Media Encoder, in export settings, I selected the tab changed and Audio Dolby Digital PCM. Must be a conflict with export of PrPro CC which had PCM audio.

  (3) in Media Encoder, changed the Source range to the entire sequence. This time, I got three output files (WAV, MPEG and XMP). Before you change the settings, I received only MPEG and XMP.

  (4) in the still, import as > timeline time MPEG and WAV.

  (5) in the still, import as > Menu for my PSD file and implement all actions.

  (6) in still, tab generate, in area Codes > activated Custom, then deselected all except 1 region.

  (7) in, tab generate, in Destination, permit Test before writing. On every other DVD - R failed as "already been written" (or something like that).

  (8) in again, burned ISO then DVD, both for the current project.

  (9) slapped DVD in all my DVD players.  SUCCESS!

  So much help does not have that kind of help!

• Satellite M30X: reader will not read the DVD-R data but plays movies in DVD-R and CD

  I have a Toshiba M30X with combi DVD/CDRW drive.
  I have accumulated 12 GB of digital photo I wanted to erase but do not want the number of CDs that can be the so I bought an external DVD LITEON EZ - DUB and made 3 DVD - R burner of plenty of JPEG.
  However, when I put the DVD in the drive of Toshiba combi, it clicks for a moment or two, but when I click on the combi drive in my computer, the folder is empty and it is said there are 0 bytes.
  CD of still works, audio and data, DVD movies fine, reading DVD-R on my Pioneer DVD recorder (for TV - looks like a video/nothing to do with PC) plays very well, but he won't recognise DVD - r with data (JPEG or MP3) on them.

  It makes no difference what software was used (Nero 6.6) and LITEON EZDUB and it's okay if the discs are completed, a single session, multi session or what - it will not play any of them.
  However, these discs work perfectly in my old office to 7 years with a Sony DVD/CDRW combination of 4 years.
  I'm puzzled.
  I don't particularly want to reinstall windows, in the case where it does not recognize the recovery DVDs and I remember Microsoft a Note having activated by phone with a code that is different every time you ask him to generate a.
  It's a bit of pain that I wanted to make my pictures with me in my laptop bag.
  I won't be carting around an external DVD burner just to read the DVD.
  I've updated the firmware for SD - R 2512.
  He had no other effect freeze on a black screen on restart - I had to hold down the switch 15 minutes in this State.
  The laptop is 1 year and 26 days if that counts for anything.

  Anyone have any ideas? Or can I just put up with him.

  Hello

  Well, I can only make suggestions.
  You are able to place files many MP3 and Jpeg on DVD.
  This is perhaps a reason why Explorer cannot handle the DVD.

  Try to burn the DVD with photo JEPG, but do not have the full DVD with these files.
  You must leave a free space on the media. Maybe it helps.

  But it's very strange for me and it's just a suggestion. I've never tired it and don't know if it helps.
  I had a similar problem on my laptop but I solved using compatible media. Some readers prefer different media for different types of files.

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• HP Envy m7-k211dx: laptop will not read the charger

  My charger started acting funny the other day my computer laptop would not load that I plugged my charger into the port, it does not seem to meet that he is in charge, I thought maybe it was the charger. My mother went bought a charger from Walmart (not the same charger company), it seemed to work, he charges the day after the day it was fully charged, I used it all day until my battery was about to die, I got the notification saying 12% going to charge your laptop, so I plugged it. It seemed to work but there was a yellow sign on the battery icon was not supported but I kept the laptop that is until I have taken as a charger when it just turned off. He died now when I try to put on I see white, flashing lights, so I don't think it's a battery problem, I just can't load, when I plug the Chargers none of them seemed to work. There is usually a flashing orange indicating that my laptop is supported, it does not show that when I plug the charger in, now my phone is dead and I can't activate it please I need help. side note: I've tried and tried everything and no my port of loading is not loose when I plug, please help someone

  Hi @Clovis713,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that your notebook does not start on battery or AC adapter / CC. Have you tried to remove the battery and the only power of the AC adapter?

  Also, here's a document can help: HP Notebook PC - computer won't start (Windows 10)

  I would like to know whether the measures of assistance.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• My computer hp laptop will not update

  I have a hp DV7 w/win7 got from QVC, I can't update windows I get an error #8007371B code. Microsoft tells me that I have to reinstall win 7, I do not have soft wear with my laptop. I contacted QVC, they told me they have no disc for win 7 and I have to buy a copy of win 7 or the update to win 8. Also my iTunes will not update. No idea what I should do now. Thanks for your help

  We need recovery software in a dedicated hard disk partition. Nobody gets recovery disc more. When the laptop is new it told you to burn recovery discs, but you can probably still recover to factory specifications using the F11 recovery method. Press F11 you power up and see if you get in a recovery environment.

• HP Envy m6 laptop will not read the sandisk

  SanDisk is a micro SDHC 16 GB. I put it in the memory card slot and it does not read / record it. Other maps of memory work very well. What should I do?
  
  Thank you.

  Hello

  Very simple: do not use this Sandisk card. I posted my experience before, we paid nearly 1 million dollars for 4 units MDS9000 and none of them can read cards greater than 2 GB.

  Kind regards.

• my laptop will not read my CD or DVD

  When I put a cd or dvd on my laptop it loads but won't play the

  Look here: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/pc-not-playing-cds-or-dvds-from-both-drives/8ea808e8-7597-4ba5-8c7a-d23eca60ccd2 it might answer your question.

  I hope this helps!