computer is just off no reason no matter if I'm online or not any suggestions?

HOW CAN I STOP THE COMPUTER STOPS OR WHAT THE CAUSE

Hello

Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
It is just like it loses power or stop it in the normal way?

Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
air vents. Check that fans are working (before and after opening the case). When your laptop on all the
You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
test).

This sounds like material so if the above does not help you then probably need help
a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
Support of system Maker.

===========================================================

Check with these utilities to see if information may be collected: run BlueScreenView
to see if there were any BlueScreens and verify in MyEventViewer at shutdown
(or a few seconds before) See the event log contains useful information.

It is an excellent tool for displaying the blue screen error information

-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html

-------------

MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
or time of the BSOD or event to provide more information about the possible cause - see TIP.

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it a bit before and after the time of the event or BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html

------------

AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
application of all accidents occurred in your system. The information breaks down is extracted from the
.WER files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html

------------------------------

Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html

=========================================

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

I hope this helps.

Tags: Windows

Similar Questions

  • I paid for the pack of adobe PDF and I in some weird screen which shows the different products to buy. I just want to use the pdf pack to do what I need. any suggestions?

    I paid for the pack of adobe PDF and I in some weird screen which shows the different products to buy. I just want to use the pdf pack to do what I need. any suggestions?

    Hi jerrir58650452,

    You can access your service pack pdf by using the following link: https://cloud.acrobat.com

    Kind regards
    Rahul

  • My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

    My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

    Hello

    I see nothing unusual, except that there should be a "0001", or even "0002"...

    When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

    Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

  • G505s - turns off without reason

    My Lenovo G505s turns off without reason, it works for about 5-10 minues after putting in operation then stops as if the battery has been subscribed, but it has full display and is plugged.

    It does not show any screen before it turns, it turns black.

    Also, it become very hot when it shuts and only restarts after a while. the fan is clean and seems to run but it's quieter than usual.

    It's windows 10 but it was for a period of time, the issue of single recnt I had other than what is the power absorbed inside the computer laptop melten but has since been replaced and was subsequently works well

    It turns out that it was overheating, and the main problems was that the bearings on the fan was used, I just had to replace the fan.

  • my HP desktop computer crashes after a few minutes, no matter what I do...

    my desktop computer HP computer crashes after a few minutes, no matter what I do... everything and anything that is running stop... including antivirus, downloads, etc. nothing is responding and the screen is just frozen and I have turn off and on again manually to be able to use again. I've used the microsoft patch, updated drivers, windows and microsoft updates, check and remove any incompatible program, I removed all programs, toolbars, any outdoor installation... He basically just vista windows running programs, my Internet speed is fine... What can I do to solve this annoying problem?

    Hi how?

    you fixed your pc?
    I have the same problem: x

  • Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

    When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

    Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

  • Woke up and my computer was turned off

    Added 2 GB of memory to my Windows Vista program, also added an external hardrive, the idea was to keep the free memory on the computer and use the 2 TB external hardrive to store files IE. music, photos and documents etc everything was beautiful then all of a sudden I woke up one morning and my computer was turned off, I checked and tried everything but he wouldn't come, crashed my computer, and if so can it be saved and how do I do this?

    Hello LisaBrookes525

    Thank you for your comments.

    Just before you cart the machine to a technician try to change the fuse in the plug on the main power cable to the PC. Your machine is completely dead it may be something as simple as a fuse.

    Another option could be the PSU (Power Supply Unit) inside the PC

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • When the computer is turned off to stop is no longer the Vista 64 external USB Drive (SeaGate/Maxtor)

    Vista 64 - bit SP2. TB external Maxtor OneTouch 4 drive, worked well, now he wants to run continuously. The USB disk drive does not stop when I go through the steps to Remove material for it, then shut down the computer normally. Or the last step of the computer stops the disk external closing. Now the external hard drive keeps spinning, I don't know about the heads of read/write being parked or not and the white light comes on. This disk is used for the storage of photos; 30 backups; and several databases. I can't wait to have the drive platters turning 24 x 7, and I can't confirm that the read/write heads were parked safely. The error message associated with this question is below in bold. The player is now like the rabbit, continuous running.

    Diagnosis of Maxtor for this drive have been executed successfully.

    Maxtor check driver indicates that the driver is the most recent.

    Device driver Vista says the car is fine. I checked that the drive can read and write. Different backups have been recorded on this disc. I have not tried a restore because of this problem.

    Maxtor says that there is not any change in firmware pending for this drive.

    Seem like a command to close jammed somehow being sent on disk.

    Apparently the Maxtor One Touch USB Device, property, to optimize for quick removal of the external drive, you just completely shut down the computer and the external hard drive finished last (no need to use the hardware logic safely remove). The other option here is "optimized for performance (you must use the material logic safely remove) to turn off the player."

    These flags are defined in the Device Manager-online records-online Mass storage Drive L:

    Anyway, you try to stop the external hard drive, it will fail with the following error message:

    "Windows can't stop your 'Generic Volume' device because he's busy." Try again later. " Or a statement to this effect."

    The only software running when the error is Vista 64 bit and the logic of trying to stop the player.

    Thanks for any help you might be able to offer. Bill Sullens

    Hi Bill,

    Thanks for the detailed explanation

    I you suggest to activate the clean boot and then test to see if this works very well as expected

    Step 1: Put the computer in a clean boot

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Let us know if this helps

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Backup cancelled in Windows 7 when the computer is turned off.

    I use Windows 7 Home Premium 64-bit operating system.

    Periodically, the Action Center will display a message saying that I have to do a backup, what I do before turning off the computer. However, when I reboot the computer, I discovered that the backup has been cancelled.

    I have searched the web but can't find information about how to make the computer shuts down automatically once the backup completed successfully.  Does anyone have a solution?

    The backup has been working in the past?

    Have you ever attempted an upgrade to Windows 10 and then back to Windows 7?

    For example let's say you have your backup scheduled task to run at midnight...

    If your computer is stopped at midnight, the backup does not - because the computer is stopped and the task was "missed" because the computer has been shut down.

    If you have the backup task configured on "Run as soon as possible after a regular departure was missed":

    When your computer working again missed backup task starts automatically.

    If you have your scheduled backup job to run at midnight and your computer is in "Sleep" mode, you have the task configured to wake the computer to run the backup:

    This won't work for wake up the computer if it is in "Sleep" mode  It will not work if the computer is in hibernation or if the computer is shut down.  As you can be awakened from sleep, the computer can be awakened from sleep, but you can't be awake if you're dead (stop).  You have to sleep to being awake.  You can be awake if you're dead or hibernation.

    The 'problem' with this approach is if the computer wakes up and runs the backup it will continue to function and you don't want that.   You can the computer to wake up, run the backup, and then click Stop (or to go back to sleep) when the backup is complete, and you can configure to occur in two different ways.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

    If your computer is in hibernation or stop the scheduled backup will not work until the computer working again and realizes that he has missed a task... then the backup will run - if you have the task set to do as the first example.

    Depending on certain factors that have nothing to do with Windows there are ways to make your computer start at a certain time of the hibernation or shutdown (mean 23:55) so it will be quick and then the backup will take place at midnight but will continue to operate your computer unless you include an additional step to stop the system again when the backup is complete.  These things are not exactly automatically built into Windows, but there might be ways to do things the way it works.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

    Find how to solve is often a matter of the question or stating the problem clearly there is no guess, no things difficult and none of these proceedings of the wild goose.

    What is the problem with the way your backup works now?

    What part doesn't work the way you think it should work?

    How do you think this should work?

    How it works?

    If your computer is turned off (off) do you want that it to wake up itself, run the backup and then stop when the backup he fill?  You can do it if you want, but it takes an extra effort and has a few requirements outside the Windows operating system.

    The task of the example above is set to run every Monday at 09:00.

    If my computer is running at 09:00 on Monday, the backup will start and run Monday at 09:00.

    If my computer doesn't work at 09:00 on Monday, the backup will run as soon as possible after the computer restart us and that's fine with me.

    I do not use sleep or Hibernate so I don't have to worry about how get the copy backup to run under these conditions.

  • My computer keeps turning off by itself!

    My computer turns off by itself.  I'll just be on the Internet and then it stops without any warning. When I try to turn it on it power up I won't have to plug it in.  Windows 7 TOSHIBA Satellite

    Hello

    The battery could be bad or defective. The battery terminals may be dirty/corroded or
    There could be a problem with the battery charge or provision of circuits. Chances are it is the battery
    but it can be a lot of other material related issues.

    With the help of Toshiba, check their documentation online, the diagnosis and ask in their forums
    on known problems.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    ================================================================

    You can create a detailed report on the State of the battery to double check the battery status.

    1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.

    2 in the command prompt window, copy / paste or type the following command.

    powercfg-energy-output %userprofile%\desktop\energy-report.html

    Press ENTER.

    This create a file named energy - report.html and place it on your desktop.

    3 go to your desktop and double-click the file to open.

    Scroll to the bottom for the battery: battery information section.

    You will see:

    Rated xxxxx

    Xxxxx full last Charge

    (Where xxxxx is a number)

    Copy these 2 lines and paste them into a reply to this post. We can take a look at it and give you an analysis of what these numbers mean.

    (Provided by Ronnie Vernon)

    =============================================================

    It must be plugged directly into a wall outlet without any power strip is to be sure of nothing by
    where a problem with the power supply for the laptop.

    The battery can be worn and must be replaced, battey contacts would need to be cleaned if)
    "they may be), or there could be other hardware or software problems. Check with a real computer store
    (one that makes its own service internal) or Support of Acer.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    -----------------------------------------------------

    References to Vista also apply to Windows 7.

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    ================================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    =================================================================

    Other information that might help:

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have online forums.

    New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Taking care of your laptop battery
    http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

    Battery meter: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

    Battery saver
    http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

    Solutions to common battery problems
    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

    What is the precise the battery meter?
    http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

    What should I do if I get a notification "consider replacing your battery"?
    http://Windows.Microsoft.com/en-us/Windows7/consider-replacing-your-battery

    ============================================================

    Try this - to make a Restore Point

    How to create a System Restore Point in Windows 7
    http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
    who will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I've installed Illustrator dnuee and uninstalled and reinstalled, it bounces just off the dock and does not open (should I uninstall CS5) thank you

    I've installed Illustrator dnuee and uninstalled and reinstalled, it bounces just off the dock and does not open (should I uninstall CS5) thank you

    Hello Leana,

    Can you please try to open Illustrator after creating a new user account on your computer?

    It could be a permissions problem, I just want to check that first.

    Thank you best regards &,.

    Rambour

  • I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off

    I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off. I pay package the student since April 2014 and for a year, and I understand that I can get Adobe in two computers at home.

    Thanks for your reply. I pay $ 22 a month package for a year. I just spoke with the help of Adobe, and I solved it they problem. I'm on my second computer. Magali helped me, service excellent customer!

    You are now chatting with 'Magali.

    Magali: Hello. Welcome to Adobe Technical Support.

    Magali: Hi there.

    Magali: Could you please develop your question?

    Magali: Are we still connected?

    Maria V Abreu Valarino: Hi. I want to install Illustrator and some other applications adobe on my second computer and it keeps disconnecting. My first computer is turned off. I registered until I turned it off. I have already downloaded creative cloud, I introduce my user and password and it tells me "you have been disconnected. I pay the student since April 2014 Kit and I'll do it for a year, and I understand that I can get Adobe in up to two computers at home. What should I do?

    Magali: If I understand correctly, you can not connect to the desktop CC application. Is this correct?

    Maria V Abreu Valarino: Yes, in my second computer

    Magali: Thanks for confirming.

    Magali: I'll be happy to help you with this problem.

    Maria V Abreu Valarino: Thanks a lot.

    Magali: Close all adobe applications running including the CC desktop application.

    Magali: You're welcome.

    Maria v Valarino Abreu:

    Magali: Place you C drive and type %LocalAppData% in the address bar and press ENTER.

    Maria v Valarino Abreu:

    Magali: Go to adobe.

    Magali: Go to the OOBE.

    Maria V Valarino Abreu: I don't have a folder under that name.

    Magali: Appointment to the Local and then go to Adobe.

    Maria V Abreu Valarino: ok, I'm in OOBE

    Magali: Then go to opm and remove the opm.

    Magali: May I ask if you are finished?

    Maria V Abreu Valarino: it says that the file is currently in use, does not want to remove it, and CC Office App is not open

    Magali: Launch the Task Manager and click on the "processes" tab and put an end to all the processes associated with adobe, creative cloud and synchronization of the base.

    Maria V Abreu Valarino: done, I deleted the opm

    Magali: Okay.

    Magali: Launch the CC desktop app and try to connect.

    Magali: And tell me if you still get the error?

    Maria V Abreu Valarino: ok, give a second

    Magali: sure.

    Maria V Abreu Valarino: nop, I don't sign

    Magali: I know the error message you get?

    Maria V Valarino Abreu: "logged out".

    Magali: Okay.

    Maria V Valarino Abreu: "you have been disconnected".

    Magali: Can I know if you are in home network or office network?

    Maria V Valarino Abreu: I am a student

    Magali: Okay.

    Maria V Valarino Abreu: I have two computers at home

    Magali: Okay.

    Magali: If please browse the computer and then go to the c drive.

    Magali: Go to windows.

    Maria v Valarino Abreu:

    Magali: Go to System 32

    Magali: Go to drivers.

    Maria V Valarino Abreu: I'm here

    Magali: Then go to etc and find the Hosts file in the etc folder and copy it to the desktop computer.

    Magali: and then open it with Notepad and copy the content and paste it on the chat window.

    Maria V Abreu Valarino: # Copyright (c) 1993-2009 Microsoft Corp. # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # This file contains the mappings of IP addresses to host names. Each entry # should be kept on an individual line. The IP # must be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one space of #. # Additionally, comments (such as these) may be inserted on lines # individual or follows the name of the computer that is designated by a symbol "#". # Example: # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client name resolution host # localhost is handled within DNS itself. # 127.0.0.1 localhost #: 1 localhost

    Magali: Thanks a lot.

    Magali: Close the hosts file.

    Magali: Launch the internet browser explorer.

    Magali: I know if it is launched?

    Maria V Abreu Valarino: ok

    Magali: Open Internet Explorer > options Internet, click on the tab "connections". In the tab 'Connections', 'LAN' selection settings, you will be able to display the Local network settings. In the LAN settings box, select the checkbox "automatically detect settings".

    Maria v Valarino Abreu:

    Magali: Then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server "." Click on the ok button and then close the Internet options.

    Maria v Valarino Abreu:

    Magali: Launch the creative Cloud desktop application, try to connect using Adobe ID and password.

    Magali: I know the status?

    Maria V Abreu Valarino: it seems that it is me signing in, yet the blue circle of uoloading

    Magali: Okay.

    Maria V Abreu Valarino: Yes! I'm registered!

    Magali: great!

    Magali: Now, you can go ahead and the CC desktop application allows to install the CC apps.

    Maria V Valarino Abreu: John, you're the best! Thank you very much!!!

    Magali: You're welcome.

    Magali: I'm so happy to hear this from you.

    Magali: Is there anything else I can help you?

    Maria V Abreu Valarino: can I do a survey of your service?

    Magali: You receive an email that will contain a link to complete a survey in option to provide your comments on the experience of the support. Your comments are much appreciated.

    Magali: Her makes me happy to help you.

    Maria V Abreu Valarino: Yes I'll do without a doubt! Thanks again, have a nice day!

    Magali: You're welcome.

    Magali: take care.

    Magali: Please contact Adobe.  We are available 7 days a week, 24 hours a day. Good bye!

    --

    The chat session is over.

    Please contact Adobe.

    This chat session is over.
    Please contact Adobe

  • Tecra A5 - charges the battery only when the computer is turned off

    Hello

    For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

    I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

    On the other hand, if I turn off the computer, the battery starts to charge.
    I replaced the battery a few months ago, so I think it's still OK.

    The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

    Thanks in advance for your contributions.

    > The charger is defective?

    Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

  • Safari never puts a message on the screen saying that my computer has just been infected?

    I was surfing internet this afternoon and a window pops up on my screen telling me that my computer had just been infected by a virus and that I should click on a button to cancel the infection.  The pane had the Safari logo in it.

    I was afraid that the message itself was wrong and didn't click the button but instead, disconnected from Safari and closed my computer.

    Someone has an idea of what it was?  Safari post windows like that?

    Thank you.

    BrownChair,

    Phony 'technical support' / 'ransomware' popups and web pages will explain what you need to know.

  • Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

    Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

    This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

    Help!

    The laptop is a year old.

    I already ran the diagonsitic battery and it said the battery was good.

    OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

    Here are the parameters:

    reserve battery level (this is when the popup will appear).

    10%

    low battery (this is when the low battery action will be performed).

    8%

    critical battery level (my computer would die at this point.)

    7%

    low battery action: sleep, sleep (this customize to your liking).

    battery low notification: on (hold on).

    critical battery action: sleep, sleep (my computer died already in criticism.)

Maybe you are looking for

  • How to configure exceptions for the automatic cookie deletion on closure?

    Firefox is to forget my connections to google in two steps. On the page of checking google in two steps, there is a box that says "Do not ask for codes again on this computer." But firefox keeps asking for codes. I put to erase cookies on firefox clo

  • Qosmio X 70-A-12 X - webcam does not work after installing Win 8.1

    I installed Windows 8.1 update.Webcam no longer works. If I have installed other OS, it works... This isn't a hardware problem. What is a driver available that must be installed for Windows or Windows Update 8.1 8.1? No idea why does not?

  • How to use a signal of true/false dynamics with a business structure?

    Hey everybody- Is it possible to enter a case structure dynamic data of true/false?  We try to generate a waveform and want our structure case to run when the wave exceeds a certain threshold value and freeze execution when it drops below the thresho

  • Need to rsh on Windows

    Hi all I need to implement the functionality of 'rsh' on Windows; (similar to the way that it is used under Unix/Linux).I understand the rshsvc daemon or service must be defined on the server. and that it is provided in a standard installation of Win

  • How to change the font size of the content of the control tree programmatically

    HelloProgramtically can I change the size of police of the parent element and a child in the tree control. In my application, the parent elements and children evolve programmatically. That is to say the content of the tree control is not constant it