Computer is picking up other sounds from the House and play?

Similar Questions

• No sound from the headphones and speaker sound is crackly and distorted

  Original title:

  Audio problems

  Taken my headphones do not work when I plug in the headphones and the sound of my speakers is now crackley and distorted, any help?

  Hello

  1. have you tried to connect the headphones on another computer?

  2. What is the brand and model of headphones?

  3A this works much earlier?

  4 you did changes to the computer before the show?

  Method 1:

  Run the audio Troubleshooter that might help us diagnose the problem better.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2: Show disabled devices and headphones as a default value.

  Exercise the functions mentioned below to set the headset as default:

  a. go to Start and click on Control Panel.

  b. click on her, then a new window will open.

  (c) in the new window click on the "read"tab, right-click in the window and then click Show disabled devices. "

  d now check if the headset is listed there and right-click on it and choose allow.

  e. select headphones and click on ""as a default ". "

  Check if it works.

  In addition, see the following links:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps!

• If I downloaded the program from the site but do not run or install ammyy, is my computer safe? Are my other computers in the House at risk if they were not present?

  I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

  I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

  I don't know which is the site of ammyy, and I don't know what you have downloaded. If you just downloaded a file and tried not to install or run, there are no danger to him, niether to your computer or any other. If you think it's dangerous, just delete it.

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• No sound from the tv with hdmi w3 connection

  I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

  I was unable to locate a compatible driver on intel.com.

  However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

  I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

  I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

  Thanks for your suggestions and help.

  Problem solved (sorta).

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

  I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

  Thank you.  I had to go to the sounds and have speakers/headphones to HDMI it didn't work at first but founmd you need to have the TV and the computer.

• 2.1 speaker system-no sound from the left speaker sound

  Its speaker problem

  I have a system of 2.1 speakers - subwoofer, a left and a right speaker. All of a sudden my left speaker stopped working. What can I do?

  Hello

  ·        Remember to make changes to the system?

  ·        You connect the speakers on another computer and check if you are able to hear the sound from two speakers or not?

  ·        What kind of speakers do you use?

  It could be a faulty socket. Try to connect the different speakers to an outlet and check if the problem persists.

  It could be a problem with the sound card drivers, I suggest to uninstall the drivers from the system and reinstall it on the system and check. Follow the steps mentioned in the article below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• No sound from the microphone in Windows 7.

  Original title: Add a microphone to windows 7

  Hello I am trying to add a microphone to windows 7.  I put in the pink jack point on the back but no sound. I'm redoing a voice on a software program Pinnacle while the editing of a film that I took.  Thank you very much

  Hi Linda,.

  You are able to get the sound from the speakers?

  You can check if the microphone works on another computer.

  You can also try to run the hardware troubleshooter and check if it helps.

  Convenience hardware store

• No sound from the right speaker / can not configure the speakers

  Hi all

  I have a new computer Sony laptop and just tried plugging in my speakers 2.1 computer inside.  Sound only comes out of the left satellite and a subwoofer.  When I try to set them up in the sound control panel, the installation of the single speaker on the speaker Assistant is stereo and only the first test tone (left) plays from the satellite on the left, then silence (no dial tone test on the right).

  Everything works fine on the built-in Laptop speakers, but they are for computer speakers, so I wish I could use my old speakers when I'm at my desk.

  Sony Vaio and Windows Update Update did not recommend all new drivers for the audio controller.  I downloaded and installed the latest driver on the site from Realtek but that didn't work at all so I rolled it back to the version provided with the system.

  Work fine with my laptop speakers older and my cell phone, so the fault is not with the right satellite is.

  Thank you
  Drew

  Hi Drew,

  Thanks for posting your query in the Microsoft Community. There is no sound from the right speaker in accordance with the description of the problem.

  ·         Did you do changes on the laptop before the show?

  I suggest you follow the steps in the article.

  Tips for solving common audio problems

  You can see these articles for more information:

  Sound cards: frequently asked questions

  No sound in Windows

  I hope this helps. Let us know if you need more assistance.

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.

• I have no sound from the external speaker

  I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

  How did the car system connected to the car?

• I'm not all the sounds from the speakers. The volume is up

  I'm not all the sounds from the speakers.  The volume is up

  The following links may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  (307918) how to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB

• my "speaker" icon has disappeared from the toolbar, and I have no sound. Any ideas?

  my "speaker" icon disappeared suddenly from the toolbar, and I have no sound. Any ideas?

  Start > settings > Control Panel > sound and Audio devices > Volume tab

  Make sure mute is not checked

  Verify the Place Volume icon in the taskbar

  Ok