Computer is picking up radio programs or TV channels

Similar Questions

• How can I disable the background music, which replaced radio programs, when my computer is not being law

  How can I disable the background music, which replaced radio programs, when my computer is not actively used, for example when I am sleeping? My computer is an Aspire x 1301.

  Are you talking about the background music when the screen saver is active?

• My Vista computer picked up a program (virus) that leaves me no other thing than go on their site. They want me to pay them $55.00 per year to get my computer again.

  I am writing this issue on my XP computer. This program is claiming that my Vista machine has 38 virus, keyloggers, trogans and everything. I have no way to know if it is accurate. I hate having my computer held hostage as this program is done. Now, this program crashes my computer after a few minutes. Before that I have to pay these people money I turn the computer into a Linux machine. However, I prefer to return to Windows. If I start the machine without this program race then I think that I can restore with Acronis backup program I have on my external hard drive. I see a lot of Internet boot floppies but I don't know which ones to trust. I do not think that the store where I bought this computer included a drive system in the box, so I have no system disk and unfortunetly, this is the only computer I have without a startup disk, major control.

  Thank you

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If ever needed here is a link to a start-up repair disc

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  for disks

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place

  Original title: blocking or scrolling

  Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.

  Hello

  1 how long have you been faced with this problem?
  2 don't you make changes on the computer before this problem?
  3 what e-mail client or browser you use?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, viruses or malware scan and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• My XP computer will not open any program or website without asking "open with", tried restoring the system

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/my-computer-will-not-open-any-program-or-website/420df6df-8cf3-48e6-810b-a00c3fd04c69

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  the windows system restore feature is a very important system.

  and if it is defective or failed in some way, then this may be a sign that your whole system could be damaged or unstable.

  what you can try is execution of the system via safe mode restore.

  If this does not work yet, so the next step is to move your personal files, documents, photos and send boxes out of the system because the following methods that will help restore your system can put your personal files safe.

  so after trying safe mode stage and or copy your personal files from the system, we can take the next steps.

  Incidentally, if your computer came pre-installed with windows, or you halographic disc of microsoft for the operating system?

• My computer does not open a program or a Web site without asking "open the file with.

  Hello, please help, my computer does not open any program or website without asking "open with" and when I choose one to download, but the download never happens... what should I do?

  * original title - help *.

  try to run a system restore point that will restore the computer settings.

  and use a restore point made on a date before the time when the problem / problems began.

  Click Start > all programs > Accessories > system tools > system restore

• iTunes is message to help protect your computer, Windows has closed this program with DEP.

  whenever I installed iTunes it gives me message "to help protect your computer, windows has closed this program" I did chang the Change data execution prevention settings. but after I closed the DEP screen it gives me the message "iTunes meet a problem and needs to close" I uninstall this appilication repeatedly and again I didn't solve the problem

  Ask the question in a forum of iTunes:

  https://discussions.Apple.com/community/iTunes?CategoryID=149

• Need help! Just got a message window on startup, which reads "path of data execution: to help protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.» Can anyone help?

  I just got an error message at startup, which reads: execution of data path: to protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.  My pc is under Windows XP SP2. I think that different multiple verisons of software "virus protection" began to appear in the Explorer. I know that they do not belong on my computer. I tried to close them, but they just kept moving forward. I'm trying to find some help to solve the problem. Moreover, when I close the window of Data Execution Prevention error message, I have my bottom, no other other icons for one of my programs are on the screen. Help... This can be corrected?

  Thanks in advance.

  Carter2009,
  If you started having 'Magical' Antivirus programs to appear on your system that you do not install, then you are infected.  Some people may be painful to remove, to others not so much.  I recommend http://www.malwarebytes.org/ for malware protection and http://www.microsoft.com/Security_Essentials/ for antivirus.

  But now you're in a bit of a place.  I download Malware Bytes and put it on a USB key.  Then see if you can boot in safe mode and run MalwareBytes.  If you're not in safe mode, take a look at this: http://support.microsoft.com/kb/318027

  Hope these helps. QQ learn manage!

• After that the following windows help & support only computer suggestion starts, but all programs are disabled. Can not even you can reach the help & support,

  I had a few actingweird and slow start up programs.  Windows Help & support suggested that I "click here" to start my computer with only the Basic programs necessary for the performance of the computer.  I did, now I can't access anything whatsoever.  NET - cannot be found. Even my audio icon is x'd out.  I can't have developed Windowsnhelp to know how to solve this problem.

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  3. that all troubleshooting steps did you try?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest to run the system restore to the date where everything worked well.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  I suggest also provide information to the event log.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• What I would do, my computer has so many unwanted programs, is to reinstall Vista and not all HP programs that I don't want.

  What I would do, my computer has so many unwanted programs, is to reinstall Vista and not all HP programs that I don't want.  It seems to make the computer too slow.  I don't have a Vista disc, only the recovery CD I did in the beginning. Can I recover and just reinstall Vista, or should I get back it?
  Thank you
  Bill

  original title: recovery

  If your "Vista recovery disc" is provided by the manufacturer of your computer, be it Dell, Gateway, Hewlett-Packard, etc... Then chances are he's doing a thing. Completely format your hard drive and restores your computer to the day you brought it home. It's a major nuisance for many people these days, as if you have an error and Windows says 'Please insert the Vista CD to fix it Windows' well, you do not HAVE the CD to correct the error. Your only option is a complete erasure of all data.

  So, my advice is to avoid ever NEED to use the recovery CD, and if you don't... hope you have backups of your important data (which is another thing, backup your important data often!).

• My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  Buy a micro better use - one with noise suppression.  Sounds like inexpensive material.

• My computer will not open certain programs, and the system does not.

  I have really no idea what's wrong with my computer, so I'll just list the symptoms.

  The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how many times I tried.  I went to restart my computer, and that opens up a host of new questions.

  My antivirus - Windows Live OneCare - software does not open.  I tried to turn on Windows Defender for malware, but it crashes when I try to do.  Not only does iTunes opens, but neither a few other programs I have on my computer--mainly those who could help me to solve this problem, such as the restoration of the system.  When I try to uninstall a program - all - nothing happens and he refuses to let me try to uninstall anything else, insisting something is already uninstall.  And my computer can't detect my printer.

  Which leads to my other problem: I have two computers connected to a network via an Ethernet cable.  The other computer is fine and can access the Internet fine, but when he sends something to the printer, nothing happens on the end of the printer.  It is a red 'X' the symbol of my network on my computer in the lower right corner (next to), so I guess this confirms my concerns about the network.  I don't understand what exactly is the problem, just that the other computer cannot print (it is not connected directly to the printer, mine is).

  Because Windows Live OneCare and Windows Defender does not work, I can not scan to see if it is the result of spyware or malware.  And because whenever I click on the system restore, nothing happens, I can't restore the computers to something else.  I'm completely stuck.  More critical functions simply do not work.

  If you have Vista then the Windows 7 upgrade that will take and install without problems, but the editions between operating systems need to be adapted, Home Premium, Home Premium edition, or higher, you cannot switch to a lower version.

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You never provided the installation diskettes, it's unusual for OEM nit of a recovery hard disk Partition.  Check any manual provided, or go to the manufacturer's Web site and see that your machine is delivered with.

  Failure one of the reasons for CD or DVD boot's Boot in the Bios options to have the hard drive initialization before any other media.  You may need to check the settings in the Bios and put them accordingly.

• [Trying to open the computer management] The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I get following error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Thank you

  Marilyn

• The program cannot start because MSVCR110D.dll is missing on your computer. Try reinstalling the program to fix this problem

  Hello

  When I run my application, which is integrated in the VS2010 x 64 mode debugging mode, I get the following error:

  "The program can't start because MSVCR110D.dll is missing on your computer. Try reinstalling the program to fix this problem.

  I tried the solution and all the links point to the installation of the ' Microsoft Visual C++ 2010 Redistributable Package"which I did and the problem still persists."

  Please notify.

  Thank you & best regards

  Paul venturini

  You should be able to get the MSVCR110D.dll installing a Visual Studio Express programs:

  http://www.VisualStudio.com/en-us/products/Visual-Studio-Express-vs.aspx

• The program cannot start because MSVCR110.dll is missing on your computer. Try reinstalling the program to fix this problem - Windows 7

  Hello

  I installed a program in Windows 7 and I can't start it because it appears: "the program can't start because MSVCR110.dll is missing on your computer. Try reinstalling the program to fix this problem. I looked for answers and I found that I can install this http://www.microsoft.com/en-us/download/details.aspx?id=30679# (Visual C++ Redistributable Packages). In this connection, there are 3 files to download: VSU_4\vcredist_x64.exe, VSU_4\vcredist_x86.exe and VSU4\vcredist_arm.exe. My question is which file should I download or if I have to download each of them. How can I know which one I need to upload?

  Can someone help me please?

  Thank you

  Sebastian.

  VCRedist_x64 is for 64-bit systems.

  Vcredist_x86 is for 32-bit systems.

  If you are running Windows 7 32 bit, just install the x 86 version.  If you have Windows 7 64-bit, you may need to install the x 64 and x 86 version. First try the x 64. I f it does not work, install the x 86 version as well.

  vcredist_arm.exe is for devices using ARM processors which are compressed as the Microsoft Surface.