computer keeps coming back to Windows Error Recovery

Similar Questions

• COMPUTER KEEPS COMING BACK TO INCORRECT TIME

  I continue to put my time in the Eastern time zone, and it keeps going back to 1 hour more early than it should be.  I did all the updates and installed the SP3, but still can not solve the problem.  Any suggestions?

  Check time zone settings and set your time zone

  Setting the Daylights saving time

  Concerning

  Good luck

  Sohail A Khan material professional network VOTED a S HELP FULL if THIS REALLY WORKS HELP OTHERS FIND ANSWER FASTER

• I had a fast PC program that keeps coming up as an error and I can not find the program on my PC?

  There is a Speedy PC Pro porgram on my computer keeps coming back as an error and I can not find the program or software

  any where on my computer to uninstall or remove. I don't know where it comes from. Please notify.

  If the "program not found" error message is associated with the Windows startup, another solution is to use the System Configuration tool and remove applications from the startup list.

  Here are the steps on how to do this:

  1. Move the cursor to the Start menu and then click on "Run".
  2. In the Open box, type msconfig
  3. Heat the Enter key
  4. Click the Startup tab
  5. Remove/disable all uninstalled applications in the startup list
  6. Move the cursor to the Start menu and then click on 'stop'. After that click on 'restart'.

• Windows error recovery vista

  I have an Acer Aspire 6929g with Vista.

  Last night I turned on my laptop and I forgot about it, it was not plugged in then the battery is dead.
  Today, I turned it on and windows error recovery is there.
  I tried to launch launch repair but also to start windows normally. Both options present some loading screens and then resumed on windows error reappears.
  I followed another forum and typed F8 to access the menu restart to safe mode options.
  I tried all the safe mode and a few other options on this screen, but I finally get back to windows error recovery.
  I have not all disks to restart.
  Any other suggestions?
  The laptop is 3 years old.

  Hello

  With an Acer you would normally press Alt + F10 to start recovery to factory settings process, if no disk came with it for purchase.

  And a password for this process, it is normally of six zeros.

  Be warned; all data will be lost when reinstalling.

  See you soon.

• I cannot use windows update. The 80070490 error keeps coming back.

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• An error keeps coming back that there is a problem starting werconcpl.dll - the specified module could not be found. What should I do?

  An error keeps coming back that there is a problem starting werconcpl.dll - the specified module could not be found.  What should I do?

  Hello

  ·         Since when are you facing this problem?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  This file is a Microsoft Windows System. If you receive the warning on the file, I suggest you to run the latest Microsoft security on your computer Scanner and check if that helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2: Run scan files (SFC) system auditor

  It will scan your computer to check the integrity of files on your system.

  The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  SFC follow the steps in the article to run a scan:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Microsoft Train Simulator error Setup error "Unable to verify the media" keeps coming back.

  Original title: Microsoft Train Simulator Setup error

  Try to install Microsoft Train Simulator on vista and when installing on the error 'Failed to check media' 2nd drive keeps coming back. Have also tried on another computer that has XP and the same results. Can anyone help?

  Hi Rick,

  Given that the CD does not work in Windows XP computer also, there seems to be a problem with the drive itself.

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver part of the disc with a soft and Lint cotton cloth.

  You can read the following article and check.

  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.

  If you are always faced with the question, so you may need to replace the drive.

• Updates to Windows during the stoppage has not taken effect and the same updates (16 of them) keep coming back in the next restart.

  Original title: Windows updates has not taken effect.

  My Windows updates during the shutdown did not effect. The same updates (16 of them) keep coming back in the next restart.

  I tried fixed it 50461 mentioned in one post, but the problem persists.

  Any help to appreciate.

  Hi Lee CC,.

  1 windows operating system you are using?

  2. you receive an error code or error messages?

  3. Why have you tried the Fixit 50461? Have you received a 646 error?

  This problem can occur if updates failed to install.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can also read the following article and check if it helps.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista will not start just goes to windows error recovery

  I have owned my computer a year and a half and had a lot of problems with it. I had 3 replaced hards and a motherboard.  my computer is turned off, then back on error windows approached and evry time I click an option, the computer shuts down then restarts his return to windows error recovery. I tried to put the recovery disk in, but it does nothing I also tried windows made it sit and tried the disk that is supposed to find the r but nothing will work. all of the suggestions.

  
  

  Recovery mode f11 does not work as well

  even in f8 f10 if I push the options it just stops and returns to the menu of this same

  I think that it is high time they gave you another to replace this one!

  You had such a race of bad luck, it would be more advantageous for them replace then keep "fixing" for you.

  Good luck with them and thank you for the reply.

  See you soon. Mick Murphy - Microsoft partner

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• If it like how I put my Google search and this continues. It keeps coming back on Amazon

  My search engine keeps coming back to Amazon. I need to change back to Google every time I log on my computer. I deleted all the other search engines, including Amazon. However, while other search engines remain deleted, Amazon continues to get back on the list. I also applied an application posted here, that was supposed to lock changes to the search engine, but it did not work. Is it perhaps I should contact Amazon about?
  Bonnie

  CSA can cause this problem, so check its settings and see if it always happens with those who protect the features are disabled.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10

• Equium P300-16 t - Windows error recovery screen

  It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

  Then he took me to a with option 2 windows error recovery
  -Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
  -Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

  Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

  Hope someone can be useful

  Hello

  Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

  Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

• Question - loop on Satellite L350-170 Windows error recovery

  Toshiba Satellite L350-170 - Intel Pentium Dual Core T3200 2.00 GHz, 2 GB, 250 GB, 17 "TFT, DVDSM, VHP

  My wife bought three weeks ago. Use of the lamp. Everything works fine, until a dialogue of "Startup Repair" appeared. Since then, the machine starts.

  Machine goes into "Windows Error Recovery" immediately after the Toshiba start screen and has the following options;
  (1) run the Startup Repair tool
  (2) start Windows normally

  Option 2 results in a blank screen and finally goes back to the screen "Windows Error Recovery".

  Option 1 has the reboot dialog box;

  "Your computer was unable to start.
  Startup Repair is checking your system for problems... »

  At this point, the Toshiba laptop enters an endless loop.

  So what I do now? There is no disc came with the laptop, so I can't reinstall the operating system. The dealer (Comet) is less useful and don't know no refund or Exchange for a defective product.

  Can someone please!

  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  In my eyes, you can use this procedure for recovery of HARD drive, or you can try to reinstall the OS using the Toshiba recovery disc.
  Both lead to the same results

  Good bye

• My network password box keeps coming back, and does not deal with e-mail.

  network password box problem

  My network password box keeps coming back and does not deal with e-mail, this just started happening, why

  Hello

  ·         What mail client do you use?

  ·         Were there any changes made on the computer before the show?

  ·         Are you making reference to the box to pop up while accessing an e-mail program like Windows mail or Outlook?

  Please provide us with more information about the issue so that we can help you further:

  If you are facing this problem on Outlook, see this link:

  http://Office.Microsoft.com/en-us/Outlook-help/i-get-an-enter-network-password-prompt-HA010151354.aspx

  Alternatively, you can ask the experts in the forums of Outlook:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

• Windows error recovery received CONSTANTLY after closing the lid

  I did a factory reset using the recovery a month ago discs.  When I was using the system at this time as I closed the lid.  When I came back to it at a later date, I opened the lid and noticed that it was not on.  I pressed the power button and received the following message is displayed:

  Windows error recovery

  Windows is not shut down successfully.  If it was because of the system does not, or if the system was stopped down to protect data, you might be ale to recover by choosing one of the Safe Mode configurations from the menu below:

  (Use the arrows to select your choice.)

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Start Windows normally

  What is the problem and how can I fix this so it doesn't happen or is this normal with Vista.

  Hi SouthernDixieCowgirl,

  This would happen if the driver graphics card on the computer is damaged or needs to be updated.

  You will need to update the drivers to display on the computer card by visiting the manufacturer of the card or the computer manufacturer's website and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Also, make sure that you install drivers chipset update by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.