Computer keeps going into power saving mode

Similar Questions

• My computer keeps going into power saving mode and it is not configured for it... What can I do

  My computer guard shut down in power save mode... I installed everything that has been suggested to correct this, but nothing works

  Read the documentation that accompanies and/or to communicate with the computer manufactures Technical Support.

• Monitor Dell Vostro 2705 keeps going into power saving mode

  I have a Dell Vostro 2705. When I turn it on, the screen goes into power saving mode. We tried with a different monitor and it still does not work. I do not see there is a separate video card to replace it. Can it be fixed or is - a new computer?

  Thanks in advance for your advice.

  Judy

  Hello

  Its usually a faulty motherboard. So the only option is to get the Board replaced.

  You can try doing a power cycle and if still doesn't work then a replacement of the Board of Directors.

  Concerning

• Monitor goes into power saving mode

  I have a client with a 660 Inspiron, and while working on this subject, the monitor goes into power saving mode.  Using another monitor has the same results. Now, here's the catch, the motherboard has been replaced with the same results so Dell sent his computer to another. After that set up the new computer things seemed to be OK for about 30 minutes, and then the new computer came into power saving mode. Again with another monitor to get the same results. Any thoughts?

  Hi TimMcKinney,

  Welcome to the community.

  Please let us know the version of windows and the video card installed on the system. Please check the system with a different video cable as well.

  Once the system goes into power saving mode please let us know the color of the leds on the tower.

  If you have additional questions, feel free to contact us.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• Portege M400: screen power save after going into power saving mode

  When my monitor goes into power saving mode sometimes, it is not be able to save, I solved this stopping mode energy saving, but it means that I have to drain the battery much faster help!

  I'm sure it's just the screen as I can hit the power button and it seems closed, (it crashes out of sleep mode and I only managed to get it to go into hibernation, once with success (he complains that there there not enough wealth, but there a lot 33 GB of free hard disk! that's a lot to store 2 GB of ram) it is really annoying and I have yet) the laptop over a week!

  Is it possible to find a solution or a way to find what is causeing these issues?

  -
  Garthark

  Hi Oliver

  I read your messages carefully and I'm really a bit confused. As far as I know all the tools pre-installed on each unit of Toshiba are tested. Sleep mode and standby extended too and I can't really understand what is happening in your case.

  The problem may be caused by the use of some third-party software of the part. In my opinion, do not do some experiments with non-Toshiba (driver chipset or display) software, because the software is adapted to the architecture of the unit and equipment.

• Computer runs continuously check disk and automatically goes into power saving mode.

  2 days ago my computer was working fine, then yesterday he wanted to run the check disk at startup upward. Finished, he found no errors and proceeded to vista loading which then stated that he was going to power saving mode, the screen went black and clear screen turned yellow. Now he wants to run the check disk on every restart and ends with her past in power saving mode. I've only got 1 successful start since this all started. I tried to start in safe mode but it freezes. I also tried to boot to the last known configuration but that only prompted an another disk check and ended just as vain as other attempts. The hard drive is only a year so it should not be failing already. I don't know what I should try. Any help would be greatly appreciated. Thank you!

  Hello

  1. have you made changes on the computer recently?

  2. What is the brand and model of the computer?

  Method 1.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

  The correct way to disable CHKDSK to start use the on command chkntfs /x switch in command prompt. The /x switch will exclude a verification by default startup car. If you have drive C: as your hard drive, then the command to disable chkdsk C: drive analysis would be:

  chkntfs /x c:

  If you have 2 drives C and D, you can disable chkdsk with the command below

  chkntfs /x c: d:

  So go ahead and restart.

   

  Method 2. 

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Here are the steps to disable checkdisk at startup.

  1 - click on the 'Start' menu of Windows on the desktop and click on "Search" (Windows Vista or 7).

  2. Type "regedit" in the search box and press 'Enter' to start recording.

  3 - Click on '+' in the folder 'HKEY_LOCAL_MACHINE' to develop. Click on the 'SYSTEM' folder and click on the folder "CurrentControlSet". Click on the 'Control' folder and then click on the "Session Manager" folder.

  4 double click on 'BootExecute' on the right pane. You should see the default value of the key defined as autocheck autochk * (with asterisk). The asterisk (*) means that the Windows controls every drive for consistency. Add "/ K:C" at the end of the autocheck autochk * after the addition, the final value should look like this: autocheck autochk / k: C *.

  5 - Click on "file" and click "Exit" to close the damper. Restart your computer. The disk check is no longer lance to the computer startup.

  Method 3.

  After the checkdisk has been disabled, I suggest you to reset the power to the control panel settings and check if that helps.

  Solve power problems: http://Windows.Microsoft.com/en-za/Windows-Vista/troubleshoot-power-problems

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-us/windows-vista/Change-create-or-delete-a-power-plan-scheme

  I hope this helps.

• Monitor goes into power saving mode or restarting PC

  I recently bought a Dell XP 8500 with 7870 AMD and Dell U241M monitor.

  When the computer is turned off for awhile (overnight, for example), the monitor almost always goes into energy saving mode while the PC starts in the AM (I do not see the BIOS/post visuals). If I stop the PC and power cycle a few times (turn on/off the monitor and the PC at the same time) it will generally work after 3-4 tests.

  "Sleep" mode on the PC is turned off.

  If I turn off the PC for the night and leave the monitor to go to sleep, the monitor wakes up fine when I move the mouse the next AM.

  If I turn off the PC overnight and also If turned off the monitor, PC restarts when I turn on the monitor of the AOS .

  If I turn off the PC or the monitor for a few minutes, it will work the next time it starts perfectly. The problems seem to be when he stayed all night.

  I have exchanged monitors and see the same problem with the XPS and another monitor, while the U2412M works fine on another PC.

  I tried DVI - DVI and DisplayPort to DisplayPort Cable with no difference. I tried to plug in a different bar / food. I tried to replace the GPU and checked that GPU power cable connections are tight.

  So, I guess that the problem is in the hardware XPS GPU or PSU and I'm quite surprised it didn't fall Dell quality control (or it has been damaged during transport?).

  Any thoughts? I don't really want a backup and reconfigure a new Tower and thought that I would get away from this kind of problems by going with a Dell.

  Thank you

  Sam

  For those who might wonder what was the end result, Dell has replaced the GPU and now it's fine.

• My laptop goes into power saving mode after one minute. Someone knows why?

  It's just started happening yesterday. I use a Toshiba laptop and out of nowhere, my PC goes in power saving mode after one minute when ALL my settings for this mode is 30 minutes. Does anyone know how to fix this?

  Hi MattLipkint,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails then I would suggest that you update the display adapter drivers, basic input/output system (BIOS) and motherboard chipset drivers.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• Try to stop the XP machine, keeps flashing 'Current Auto adjustment' and goes into power saving mode instead

  Keep them from flashing "setting current auto" and not shut down completely... stay in power saving mode.  What should I do?

  * original title - Dungeon of flashing "auto adjust in progress" help *.

  Hi cindytown,
   
  The "Automatic Setup" dialog box is displayed on a black screen as the monitor is automatically set on the current entry.
   
  Auto setting will not happen if you press the monitor button, while there is no active video input signals, or attached cables.

• Monitor immediately goes into POWER SAVING MODE on startup

  Hello and HELP!

  Just unpacked a Dell Inspiron 530, I bought in January 2009 (long story).

  After all hang up, I turned it on. Monitor shows a brief moment, just a flash, AUTO DETECT (ANALOG INPUT) entering POWER SAVE, then it goes black and nothing that I bring him on.

  This Inspiron came only with a VGA monitor plug. The flat screen has a DVI and VGA and DVI and VGA cables sheets. I connected the VGA cable to the VGA connectors.

  I tried the fixes I found on this site: PC and disconnect the cable VGA pc and monitor, reconnect. Disconnecting power plug from the monitor, plug back. From the start, press the F6 key. Nothing. Nothing. Nothing. He has been guaranteed.

  I noticed when the monitor is not plugged into the pc and I turn it on, it flashes the message AUTO DETECT (ANALOG INPUT) entering POWER SAVING again and stops.

  The cable would be bad? The video card would be bad? The video card could be on the DVI?
  I can't even enter and see the BIOS, blind without visual. The speakers are in the monitor, and no sound is coming from them. Don't know if run even Windows (Vista).

  Any suggestions?

  I pulled the cards memory, slightly rubbed copper with an elastic band, popped them back in and viola, the entrance to the screen the!   Found this tip on the web site of kioskea. Thanks for responding so Sujatha!

  Margoo

• my computer keeps going to energy saving mode and TIME off

  each time my computer shuts down I have to turn power on wall to restart it and itgives me 10 minutes and will return to the mode and towers out of energy saving

  Why do you think a problem as it is related to Firefox?

• How can I configure my computer to it won't go into power saving mode every 2 min

  How can I configure my computer to it won't go into power saving mode every 2 min

  How can I configure my computer to it won't go into power saving mode every 2 min

  Change the configurations screen saver and hibernation / sleep appropriate for your desires.

• computer freezes and goes to power saving mode

  Several times a day my computer freezes and goes into the power saving mode.

  Hello
   
  1. have you made changes on the computer recently?
  2. do you use a particular application when your computer crashes?
  
  Method 1.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  Step a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  
  Method 2.
  Also, check the logs of the observer eveny for recent activity on your computer and check.
  This article describes how to use Event Viewer to view and manage the event logs in Microsoft Windows XP.
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer is stuck in power saving mode

  Hello. I need your help guys. My computer won't come out of power saving mode. I was chatting with someone on MSN and light of my computer went from blue to orange and my screen went black and I got the message "power save mode, press any key or move the mouse to leave". I pressed all the keys and moved the mouse, but it wouldn't leave the power saving mode. I unplugged my computer and I even changed around the RAM cards. I took the CMOS battery and tried. Nothing has worked. I also took my videos and my graphics driver cables. Still, he doesn't after that I put everything in place [except the drums]. Recently, I put the battery back in and it still doesn't work. I dusted off my gear inside my computer and cleaned the fans. There is this light inside my orange computer as soon as I put the power cable at the back of my pc. I don't know what to do. It's so frustrating. I need your help! Here are a few photos from my computer (Dell Inspiron 530 s, A).

  1: http://tinypic.com/r/28vwufp/7
  2: http://tinypic.com/r/dwvzhz/7
  3: http://tinypic.com/r/1444ojt/7

  Here are the pieces of vaues for numbers of image 3:
  1 - socket processor (CPU)
  2 - connector (CPU_FAN) CPU fan
  3 - connectors (DIMM_1) memory
  4 - connectors (DIMM_2) memory
  5 - connectors (DIMM_3) memory
  6 - connectors (DIMM_4) memory
  7 - main power connector (ATX_POWER)
  8. Jack battery
  9 - connectors (SATA0) SATA drive
  10 - CMOS jumper (CLEAR CMOS)
  11. password jumper (CLEAR_PW)
  12 - connectors (SATA1) SATA drive
  13 - connectors (SATA4) SATA drive
  14 - connector (F_PANEL) front panel
  15 - connector (F_USB1)
  16 - connectors (SATA5) SATA drive
  17 - connector (F_USB2)
  18 - modular connector (F_USB3) before
  19 - front audio (F_AUDIO)
  20 - connector (PCI2) PCI
  21 - connector (PCI1) PCI
  22 PCI Express x 1 Connector (PCIE_X1)
  23 PCI Express x 16 connector (PCIE_X16)
  24 - audio connectors
  25 - 2 USB and 1 LAN connector
  26 - 2 USB connectors
  27 - connector (CHASSIS_FAN) chassis fan
  28 - video connector (VGA)
  29 - power supply of the CPU (ATX_CPU)

  Thanks for your help in advance!

  E-mail: * e-mail address is removed from the privacy * [contact if we need to discuss.

  Hi xxbrgxx,

  You can see the steps mentioned in the links of dell under which addresses question power saving mode

  http://support.Dell.com/support/eDOCS/monitors/1901FP/en/trouble.htm

  http://en.community.Dell.com/f/3529/t/17144276.aspx

  If the problem persists, contact dell for assistance more specialized on this issue.

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• S2409W, setting HDMI will not go into power saving mode?

  So I searched high and low on these forums of the Dell Community (and other sites) and I've not seen this documented problem. The problem I have is when I plug the cable HDMI to computer (Tower slim 530) to my s2409w, I get a nice clear picture and everything works as expected, until I put the computer in standby mode.  The computer sleeps, but the monitor turns off almost as if he was going to sleep, but then display Saver screen default monitor that says "hdmi cable does not exist.  What I was expecting the screen to go to power save mode. When I use my DVI or VGA cable and put the computer to sleep, the computer and the monitor switch mode 'sleep' as expected.  This problem only occurs with HDMI. I tried setting the screen "automatic detection" and "hdmi" for the selection of cable and no work to put the monitor to sleep. Anyone has a solution, or similar experiences?  I've seen a lot of posts on power audio hdmi save the problem, but not with this one.

  -Thank you

  I know this is an old thread, but I had the same problem with another Dell monitor and a homemade computer.  In another thread, someone said that some cables HDMI I have this problem, and others do not.  I just wanted to confirm that it IS THE CABLE.

  I swapped HDMI cables with my TV.  The TV had a cable older and thicker.  Immediately after that, the monitor will now sleep just right.  What I can guess is the skip of thin cables really cheap make the connections required for this feature since the TVs didn't have standby mode.