computer laptop 15r-005tx: memory (ram) and storage (hard drive or replace it with SSD) upgrade.
friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)
edd609 wrote:
friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)
Hello
Below are the specifications of your computer:
http://support.HP.com/au-en/document/c04337709
1. for the RAM:
housing for module customer accessible/upgradable memory 1 or 2 (depending on model)
2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)
1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the)(Bay Trail processors) DDR3-1333
1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the DDR3-1066)(Bay Trail processors)
Supports dual-channel memory
Supports up to 16 GB of RAM in the following configurations:
● 16384 MB total system memory (8192 × 2) or (4096 × 2) (No 32-bit OS or Windows 7 Home)
● total system 12288 MB memory (8192 × 4096 + 1 × 1) (not for 32-bit OS or Windows 7 Home)
● 8192 MB total system memory (8192 × 1.) or (4096 × (2) No 32-bit operating system)
System memory total 6144 MB (4096 × 1 + 2 048 × 1) ● (not 32-bit operating system)
● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)
● total 2048 MB system memory (2 048 × 1).
(Your machine uses 1.7 GHz Intel Core i3-4010U with Intel HD Graphics 4400 so it has 2 slots). Please use the manual next (page 76) to the part number het to buy good RAM. The manual also shows you how add/replace RAM
http://h10032.www1.HP.com/CTG/manual/c04409502.ppdf
2 SSD:
Yes, you can replace the current drive with a good brand, standard SSD for laptops and hardware wise, please use the #59 manual page to replace the HARD drive.
The fast and easiest way is to buy with at least 512 GB SSDS, clone the SSD HARD drive and install in Bay HARD drive as shown on the #59 page.
Kind regards.
Tags: Notebooks
Similar Questions
-
I've got 4 Lightroom and my hard drive is too full with photos I have in lightroom. I want to move a lot to a USB key and remove them from lightroom. What are the steps to do this please?
I have some listed here videos that will help you with this
Organization of Lightroom - Lightroom and Photoshop training
Dave
-
What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?
The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?
my old Mackbook Pro 13 ":"
-purchased new August 2014
-3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5
-DDR3L 16 GB 1600 MHz SDRAM
-Storage flash 512 GB PCIe
-Intel Iris graphics card
I'll get to buy e new generation Mackbook Pro 13 "with:"
-2.9 GHz i5 or i7 3.1 (I've not yet decided)
-RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?
-Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?
Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!
• The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.
(143318)
-
Hi all
I need to replace probook 4720's my HARD drives (products cod WD911EA) and upgrade of RAM 8 GB and I want to be sure to buy the components of rights. Actually the pc run with 2 x 2 GB RAM DDR 1066.
I can replace it with 2 X 4 GB SODIMM 1333 PC3-10600 3 9-9-9-24 DDR v1.5 (for example Corsair? in our site, it seems that compatibility is matched). Can you confirm this info for my product of cod?
Instead, to replace hdd, can I mount a HARD drive SATA 6-500 gb 7,200 rpm and 32 MB of buffer?
Thanks a lot for help
Frag.
Your manual here.
Page 3.
Your videos to remove/replace here.
http://h20464.www2.HP.com/results.htm?SID=4145330&MEID=16F1A3F8-9C13-444C-85D5-4B4E0A7E1A8B
REO
-
I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.
It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).
My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.
However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.
But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.
And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.
As a general rule, all things were right except for options of the bios boot.
Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.
I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.
Someone at - it the same problem with me?
Any suggestion is appreciated!
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Bev.
-
How can I reload CC Adobe on my newly upgraded computer, please?
You can download the Setup file of creative cloud using which you can recharge CC apps:
https://creative.Adobe.com/products/creative-cloud
Reference:
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html
-
Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?
I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.
Hi John,.
Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.
I wonder if you have checked your system requirements before you download Acrobat.
I would also ask to share with you the screenshot of the error message with us.
You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.
http://labs.Adobe.com/downloads/acrobatcleaner.html
If you were installing DC, check out the following link to download.
https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)
https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)
Concerning
Sukrit diallo
-
trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9
trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9
Hi Pashley,
I see you get error 0xc00000e9. I'll help you with this problem.
1. What is the model number of the computer?
2. you talk to re - load Windows Vista on Toshiba computer?
3. How are you trying to re - load Windows Vista?
4. when exactly you get this error message?
Please provide us with more information to continue troubleshooting as a result.
See the link on how to ask questions or help on the Forums.
Suggestions for a question on help forums: http://support.microsoft.com/kb/555375
Refer.
You can also post this question in the Toshiba Forums: http://forums.computers.toshiba-europe.com/forums/index.jspa
Thank you.
-
my laptop is dying, I can move my hard drive to another computer and still use vista coa?
Hello
It depends on the type of license you have, as to whether you can transfer it or not.
Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.
OEM licenses are not transferable.
If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.
Retail licenses are transferable.
Just be sure that you have only installed on one machine at a time.
A single license means one Installation.
And if it is retail and transfer you, in all likelihood will have to reinstall the operating system, as this disc hard the 'old' aura card mother drivers installed, which will cause starting problems.
See you soon.
-
I have a computer laptop envy m7-k111dx and the hard drive has gone bad
I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles
Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
I'm talking about my legal copy of Indesign CS2 adobe, but told me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under license, I could put on my laptop and keep a copy on my PC at home as long as I don't have use both at the same time. None of these computers no longer exists. And why adobe cannot say that it was me who did the first activation?
It won't matter because your copy of CS2 and serial number no longer works. You need to acquire a special version because of the Adobe stop the activation for CS2 server and other products of this period. The links below will explain more and also drive you to the download version, you must get and the serial number, you can use for this.
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html
-
What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC? Want a 750 GB 7200 RPM.
davidljtn44Hello
1. RAM: please look at this: (total 8 GB max).
2. HARD drive: no problem. It can use 750 GB 7200 rpm or more.
Good luck
-
Can I replace HHD with SSD in G570 4334 laptop computer 43344JU
I have a laptop of Lenovo G570 4334 43344JU. It has a Pentium Intel B940 2.0 GHz processor,
Conditioning LGA1155, Chipset ID 1 49. And the HARD drive is a HITACHI 320 GB SATA II 2.5 INCH HTS543232A7A384.
Windows 7 Ultimate is installed on this computer.
I want to replace the HARD drive by an Intel SSD 240 GB. Is it possible to replace only the current with HARD drive
for example, an Intel 530 240 GB internal 2.5 inch Solid State Drive without changing the other hardware components such as the drive controller?
Hi lor1cal,
Welcome to the Forums.
Yes, it is possible to replace the stock 2.5 "SATA HDD to a 2.5" SATA SSD.
To put you on the SSD, you can:
1 clone stock HDD to the SSD with Paragon Backup & Recovery Home 12 (free trial) or:
2. perform a clean installation on the SSD using a Windows 7 bootable disc. If you do not have a bootable media and you only have a license key, you can get a Windows 7 ISO on this Web site. To create a bootable USB key, see this guide.
Hope this helps
-
Want TS 17 J140us: Laptop computer only supplies not on after adding 2nd HARD drive
This laptop has an option for a 2nd HARD drive.
I installed 2nd HARD drive and the laptop does not light.
When I remove the 2nd HARD drive it is normal again.
I'm guesing that a special BIOS change is needed to allow the reader to 2nd.
Anyone know what is the solution?
Thanks in advance for your help.
dgtech
Success!
I think it was just plugging in the cable needed to be reinstalled.
I confirmed that the drve was good with an external cable.
I made the stop while holding down the SHIFT key.
Once it did not work.
Then I took out the cable and put it back making sure to he went in the port exactly how is HDD - 1.
This time, he appeared in the windows Device Manager. I already made the partition, format, assign the drive letter.
Everything is good to go now. I'm glad, that I have a lot of storage space on my laptop.
Thanks for the suggestions, have a nice day.
dgtech
-
I have a Sony Vaio computer and the hard drive begins to crash.
Original title: Vaio computer
I have a Sony Vaio computer and the hard drive begins to crash. Microsoft now sells Vaio? Where can I buy?
Here are the computers that Microsoft sells: http://www.microsoftstore.com/store/msusa/en_US/cat/All-PCs-tablets/categoryID.69404700?icid=en_US_Store_UH_devices_Pctab
Maybe you are looking for
-
Cannot use external monitor as primary monitor with Portege M400
I'm unable to use the extended feature deasktop with my m400. I installed the latest video drivers. When I go to the driver intel graphics media accelerator under display properties and choose extended Office I can't use my external monitor as the pr
-
Tecra M1: Where to get a copy of the recovery CD
Hello I have a Tecra M1 Portugal and I need to reinstall the OS in the machine. My problem is that I lost the cd that cme with the computer. I still have the key of Windows XP but I do not have a CD with the operating system. Is it possible to get a
-
Hi all I have a structure of the event, whose events are all s 'change of the value' of the buttons on the front panel (each of them did switch a light when you click on it). I need one of the events to run also in the case where a certain time elaps
-
Fgen: Sync + insertion time
Hello everyone! I have a PXI system in which I a FGen 5422 allowing me to produce a ' sine burst 10 periods. FGen 5422 also has the following connections: ch0; CLK PFI 0; PFI 1 I would like to insert a "synchronization reference" signal (in PFI0 for
-
Windows media player 11 in XP does not play DRM files
I have a new installation of SP3 and the latest WMP11 on XP Home. I get this error when I try to play any DRM file any provider:http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5262&ID=C00D11B1&ContextId=71&O