Computer laptop Alienware 17 would not start

Similar Questions

• Computer laptop Windows XP does not start? Help

  Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

  It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

  When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

  If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

  If you get an error message windows system config, exactly what he says?

  No error paraphrased messages please!

  It was something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

  If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Computer laptop Windows XP does not start.

  My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?

  Hi robestes3,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  Method 1:

  First of all, you can tryLast good known Configuration and check if helps solve the problem.

  Check out the link:

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2:

  Step 1:

  If the above method does not work, then you can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:

  In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer laptop Windows vista may not start

  I have a laptop windows vista that can not boot up to windows

  1. when I on the laptop, it loads a black screen with 5 choices
  1. safe mode
  2 network in safe mode
  3
  4 last configuration:
  5 launch the window normally
  I tried to enter in all of the choices of 5... whatever choice I go, the laptop will just keep loading and loading and loading forever bar and I waited 15 minutes and finally the computer laptop 1 blue screen flash and it has restarted and it loads again to the black screen with 5 choices
  No idea what can do with him?
  Please help me.
  Thank you

  Hello

  ·         What is the full error message?

  .         Were there recent hardware or changes to the software on the computer before the show?

  I suggest you to remove the devices connected to your computer (except keyboard and mouse) external and check if you can start the computer.

  Method 1:

  You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

  To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

  Follow this link provided below to start your computer in Advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Follow the steps in the article, and check if that helps.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Method 3:

  If you have Windows Vista DVD you can try running the Startup Repair and the Tool of diagnosis of Memory Windows to check and Windows Recovery mode if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Alternatively, you can use the command prompt on the recovery mode windows to perform analysis and error correction on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Type the below command on command prompt, and then press ENTER:

  X:\>chkdsk/f

  /F Corrects errors on the disk

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• HP G60 4440us: computer laptop HP G60 will not start in safe mode

  My laptop starts and the sceen is on the side and the cursor is frozen. I tried to hit the ctrl and alt and arrow button but nothing happened. Impossible to get in the Manager of tasks either. I tried to start up in safe mode but the up arrow does not either. Help, please.

  I got it to work! Have no idea of what I did, but the screen is entered on the side and then back to normal... will run some anti viral software and hope that everything will be good.

• 15z HP touchscreen laptop: computer laptop brand new will not start

  My brand new laptop just cameo yesterday and it keeps showing "Boot Menu" with 2 options (FreeDOS and Documents HP). If I choose option 1, which is "FreeDOS", it will show other 2 options: 1 - FreeDOS load including driver HIMM XMS-memory and 2 - load FreeDOS without driver). I have chosen these 2, it displays a black screen with "C:\ > ' at the top left and it won't do anything then. What should I do? I ordered it online on the official site of HP.

  Hi @Iamtrucpham ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your issue on your laptop HP 15z touch and issues with Free Dos. This laptop does not include Windows, you need to buy Windows separately. Free distribution of base back requires no fees or royalties, and the creation of custom distributions is permitted.

  You have a few options. I can't tell you that we chose, I only know you what they are. The first option is to buy a copy of Windows from a retailer and install it on your computer.

  If it's now what you wanted, please use the following link to create yourself a file number, then call and it can help speed up the process of appeal:

  Open the link: www.hp.com/contacthp/

  File number and phone number are displayed.

  They will be happy to help you immediately. Thank you.

• Satellite A - USB issues and would not start

  It started with my computer (laptop) from freezing. Then my USB mouse leave, make me use this tablet (I hate that seriously), then the computer would not simply start so I removed the battery, the computer starts, and then it froze again, put the battery back in, computer started again. Things continue to go.

  Today, I got the Toshiba (my baby) at Staples (free checking up), they found nothing wrong. Got home, starts very well - the 1st time, I tried to reinstall my USB mouse and quess what - would not start. Out the battery, and here we are.
  Oh and by the way - I would like my rear USB mouse - I said "I hate this tablet.
  Battery has been for about 2 hours now without any problems

  Can anyone HELP?
  Thank you

  What computer Satellite phone do you have?

  Have you tested without USB mouse? Maybe this is causing the problem.

  And have you tried a BIOS update? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• My Live View would not start or start...

  Had this problem until I saw all of a sudden screen cleared and I could not start no matter how hard I pressed the buttons. In order to reset I took it to the store I bought. The display took the piece and after almost 2 days he returned saying that COMTEL would not cover up for accessories. I called the service center and asked how when offers a limited warranty, they are supported. This gentleman had no answer, but that he would accept neither of my room. Instead he suggested me to get a replacement from the store, I bought. As we were talking about the issue, the display has tried to load my mode live view and the red light on to my great surprise, which indicates that it worked. Then he started to initiate and work. When I got home, I got to know the mode Live View has had an update, I did. 2 months after there was no question too... But still today, after a full charge, it would not start again. I tried to plug into my laptop to update the software, but my laptop indicates that the USB malfunction, indicating that the Live View mode is a.

  I don't know what to do... I love my Live View... Its great use while driving, on a session and in places outside, where the silent noise your cell phone ringing...

  But, I think that the problem starts, if we have to charge the unit. Which could be considered if you are developing a software update for the same.

  Sorry to be too eloborate... Thank you for your time.

  First of all - welcome to the forum!

  Where are you from and how old is your LiveView? All the accessories are getting 12 months warranty on most of the markets (6 months in some markets).

  It might be that the service contracted by your dealer Center isn't HVC (high volume Center). They should, however, help and if so send the LiveView to a service center that allows to fix it.

  You can try to contact local support Office and ask for a service center that can fix your LiveView.

  Click on this link: http://www.sonymobile.com/gb/support/contact-us/

  Be sure to choose your country in the drop-down menu for the displayed correct phone number.

  What do you think on this forum? Let us know by doing this small survey.

• I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

  I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

  Please see: error of incorrect serial number

  I hope this helps.

  Concerning

  Megha Rawat

• Satellite A660/0MR - upgrade after RAM, Windows would not start

  I have expressed in this thread: http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=228520#228520
  But having a slightly different model (A660/0MR). Same question.

  Improved from 4 GB to 8 GB. He would not accept any 4 GB sticks at all (I tried 4 different 4 GB sticks in all - all of the correct sticks) and operation in other machines. BIOS would recognise them, the BIOS is the latest version (1.80), but windows would not start.

  Any suggestions?

  Hi Farreg,

  What new RAM modules you tried exactly?
  Is it pretested module RAM Toshiba from an authorized service provider?

• Recovery of satellite m30x-155 DVD would not start

  Hello
  I got a satellite m30x-155, I'm doing a restore of windows, the problem is the dvd drive would not start, I tried the instructions start cd\dvd first ac bluged, one got any idea what should I do?

  Hello

  You must press F12 on startup in the start menu. Select CD/DVD and then Notepad will start on DVD player.

  If it still does not respond, your recovery disc may be defective.

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.